···
Log in / Register

What is the normal fuel consumption for the 2012 CR-V?

4 Answers
LeLeonardo
08/28/25 7:08am

The normal fuel consumption for the 2012 CR-V is 13.5L/100km. Introduction: The Honda CR-V is a classic urban SUV model produced by Dongfeng Honda. The 2015 CR-V features a sporty and stylish design, paired with Michelin Latitude series SUV tires, delivering excellent handling performance. Advantages: Fashionable and dynamic appearance with smooth lines, rounded yet sporty; improved materials and craftsmanship; good configuration; powerful performance; flexible handling; high cost-performance ratio. Space: The overall driving and passenger space is spacious and ample, with no noticeable tightness in head or legroom; the interior storage space is rich and practical; the seats are well-padded and comfortable, with the rear seats being slightly adjustable, making long-distance travel more practical.

Was this review help?
19
4
Share
WestonMarie
09/10/25 5:24am

I've been driving a 2012 CR-V for several years now. For city commuting, the fuel consumption is around 9.5 to 11 liters per 100 kilometers, averaging about 10 liters. On highways, it can drop to 7 to 7.8 liters. This level is quite normal, largely depending on your driving habits. I always avoid sudden acceleration and hard braking, as smooth driving can save a lot of fuel. Weather also has a significant impact; for example, using the heater in winter slightly increases fuel consumption. I check the tire pressure monthly, keeping it at the recommended value, as too low pressure increases resistance. The car is getting older, but with regular oil changes and air filter cleanings, the fuel consumption hasn't changed much. If idling for too long, the fuel consumption may rise a bit, but overall, it's reliable and not costly.

Was this review help?
12
2
Share
Expand All
Patel
10/24/25 6:14am

From a technical perspective, the fuel consumption settings of the 2012 CR-V: approximately 9.5-10.5 L/100km in urban conditions, and about 7.0-7.8 L/100km on highways. These values are based on engine efficiency and vehicle weight design. Influencing factors include the fuel system and transmission tuning, which affect fuel combustion efficiency. Maintaining cruise control while driving can optimize fuel consumption. Clogged air filters or aging fuel injection systems can increase consumption. Regular maintenance is key, such as replacing aging components, which can keep fuel consumption stable within the normal range and extend the vehicle's lifespan.

Was this review help?
11
3
Share
Expand All
TaylorDella
12/07/25 6:37am

Focusing on fuel consumption can save real money. I drive a 2012 CR-V with city fuel consumption around 10 L/100km and highway 7.5 L/100km. Lightly pressing the accelerator and reducing idling can lower consumption by over 10%. Underinflated tires increase consumption by about 5% for every 10psi drop, so regular checks are crucial. For maintenance, cleaning the throttle body every six months helps save fuel. Choosing reputable gas stations to avoid low-quality gasoline also maintains efficiency. Older cars may see a slight increase in fuel consumption, but with good habits, you can save hundreds on gas each month.

Was this review help?
17
5
Share
Expand All
More Forum Discussions

What are the driving modes of BMW?

BMW offers four driving modes: Sport mode, Comfort mode, Economy mode, and Adaptive mode. For normal driving, Comfort mode is sufficient. If you prefer stronger power output, you can switch to Sport mode, which has a corresponding button behind the gear lever. Economy mode: As the name suggests, Economy mode prioritizes fuel efficiency. When this mode is activated, the engine becomes more fuel-efficient, but performance may be slightly reduced. Economy mode is suitable for long-distance highway driving. Comfort mode: This mode balances some fuel economy while reducing gear shift hesitation and lowering fuel consumption, providing a comfortable experience for passengers during the ride. Sport mode: This mode effectively increases engine RPM or speeds up downshifting during driving. It sacrifices fuel economy to deliver better power, making the vehicle more "sporty." It is ideal for overtaking, climbing hills, or track driving. Adaptive mode: The vehicle can monitor the driver's operations and driving conditions in real-time, automatically matching the driver's intentions and actively adjusting the driving mode. This is a hassle-free mode.
17
2
Share

What Causes Weak Acceleration After Car Maintenance?

Reasons for weak car acceleration include carbon buildup issues and fuel system problems. Here are the specific details: Carbon Buildup Issues: This includes cylinder carbon deposits, throttle valve carbon deposits, spark plug carbon deposits, and intake carbon deposits. These components are directly related to the engine's power output. When excessive carbon accumulates inside the engine, it reduces the ignition energy, decreases intake efficiency, and ultimately leads to reduced engine power, resulting in weak acceleration and muffled engine sounds. Fuel System: Using incompatible fuel octane ratings can decrease the car's power output and reduce performance. Alternatively, if the fuel tank vent hole is blocked, or if components such as the fuel tank switch, fuel filter, or fuel lines between the tank and carburetor are partially clogged, the required fuel supply may not be met. This can lead to an overly lean air-fuel mixture and cause weak engine acceleration.
1
2
Share

How to Reset the Maintenance Wrench on Ford Transit?

Method to reset the maintenance wrench on Ford Transit: 1. With the engine off, press and hold the short-distance counter reset button below the tachometer; 2. Turn the ignition switch to the ON position, then release the short-distance counter; 3. Turn the ignition switch to the second position while simultaneously pressing the accelerator pedal and brake pedal, hold for 20 seconds until the maintenance light flashes; 4. Turn off the ignition switch and release the brake and accelerator pedals. Taking the 2020 Ford Transit 2.0T gasoline multi-purpose commercial vehicle medium-wheelbase low-roof double-opening tailgate National V as an example: It is a light passenger vehicle launched by Jiangling Ford, with dimensions of 5341mm in length, 2032mm in width, and 2061mm in height, a wheelbase of 3300mm, equipped with a 2.0T turbocharged engine, delivering a maximum power of 148.5kw and a maximum torque of 300nm, paired with a 5-speed manual transmission.
15
2
Share

What are the Volvo engine models?

Volvo has a wide range of engine models. For example, the S90 offers two power options: T4 and T5. The T4 power engine model is B4204T44, and the T5 power engine model is B4204T23. Below is more information about Volvo: 1. Basic Information: Volvo was founded in 1927 in Gothenburg, Sweden. In 1999, the Volvo Group sold its Volvo car business to Ford Motor Company of the United States. In 2010, Chinese automaker Zhejiang Geely Holding Group purchased the Volvo car business from Ford and acquired ownership of the Volvo car brand. 2. Logo Meaning: The Volvo logo consists of three parts. The first part is a circle representing Mars, the Roman god of war, which is the ancient chemical symbol for iron. The second part is a diagonal ribbon on the radiator that runs from the bottom left to the top right. The third part is the Volvo company trademark, which is the word VOLVO written in ancient Egyptian font.
20
3
Share

How to Start a Front-Wheel Drive Civilian Car?

For starting a front-wheel drive civilian car, the key lies in the coordination of the clutch. It's essential to control the left foot's pressure at the clutch's critical point to achieve better traction. Here's an introduction to front-wheel drive cars: Front-Wheel Drive Cars: During acceleration, the front of the car lifts up, similar to rear-wheel drive cars. Most family sedans and urban SUVs are front-wheel drive. Front-wheel drive cars are less expensive and offer more interior space. Transverse Engine: Placing the powertrain at the front means most of the weight is concentrated on the front. Front-wheel drive cars have less precise handling compared to rear-wheel drive cars and tend to understeer during fast turns. Most rear-wheel drive cars feature a front longitudinal engine. Mechanical Components: Front-wheel drive cars have simpler and fewer mechanical components, resulting in lower overall manufacturing costs and higher utilization rates. However, their handling performance is inferior. Since the engine and drive system are located at the front of the vehicle, the rear wheels' traction is reduced, and they also suffer from understeer.
15
2
Share

Can Alcohol Be Used to Disinfect a Car?

Alcohol can be used to disinfect the interior of a car, but it is best not to spray alcohol directly inside the vehicle. Method for disinfecting with alcohol: Always dilute 75% concentration alcohol, then use a towel dipped in the solution to wipe necessary contact points such as the steering wheel and gear lever. However, it is not recommended to use high-concentration alcohol for car disinfection. This is because alcohol is a flammable liquid, especially high-concentration alcohol, which has a very low ignition point. Therefore, it is important to avoid fire hazards. Better disinfection methods: Generally, if you want to disinfect a car, it is best to choose a dedicated car disinfectant. Most car beauty and care shops and 4S stores use this type of disinfectant for vehicle disinfection. Alternatively, you can also use Lysol or 84 disinfectant for car disinfection. However, when using Lysol or 84 disinfectant, it must also be diluted before use.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.