What is the normal fuel consumption for Hyundai Elantra?

1 Answers
VonIsaac
07/29/25 8:28pm
There are currently 5 models of Hyundai Elantra available for sale. Among them, the 2020 1.4T DCT XuanDong·Vitality and 2020 1.4T DCT XuanDong·Flagship models, equipped with a 130 horsepower engine, have an NEDC fuel consumption of 5.4L per 100km. The 2020 1.5L manual ZhiXuan·Vitality, 2020 1.5L CVT ZhiXuan·Elite, and 2020 1.5L CVT ZhiXuan·Luxury models, equipped with a 115 horsepower engine, have an NEDC fuel consumption of 5.5L per 100km. The fuel tank capacity varies among different models of Hyundai Elantra. The distance that can be covered with a full tank of fuel is as follows: Models equipped with a 130 horsepower engine have a fuel tank capacity of 53L, allowing a distance of 53/5.4*100=981KM on a full tank. Models equipped with a 115 horsepower engine have a fuel tank capacity of 53L, allowing a distance of 53/5.5*100=964KM on a full tank. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger displacement engines generally consume more fuel than those with smaller displacement engines because larger displacement usually means greater power, requiring more gasoline for combustion. Heavier cars also consume more fuel due to the greater driving torque needed. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not vaporize easily, requiring more gasoline for combustion, which increases fuel consumption. Additionally, in cold temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, further increasing fuel consumption.
Was this review help?
14
5
Share
More Forum Discussions

How many days in advance do I need to cancel the appointment for Subject 1?

You can cancel the appointment for Subject 1 at any time a few days before the test. There is no specific requirement on how many days in advance you need to cancel, but you cannot cancel the appointment individually on the day of the test. Subject 1 test content: Basic knowledge of motor vehicles; laws, regulations, and road traffic signals; basic knowledge of safe driving and civilized driving; basic knowledge related to motor vehicle driving operations. Passing score for Subject 1: The total test time for Subject 1 is 45 minutes. The test paper consists of 100 questions, including true/false and single-choice questions, with a full score of 100 points. A score of 90 or above is required to pass. The test paper is randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations". Is an ID card required for Subject 1 test: Only an ID card is required for the Subject 1 test. Please note that an expired ID card cannot be used.
2
3
Share

What happens if you miss the scheduled Subject 1 test?

If you successfully schedule the Subject 1 test but fail to attend, it will be recorded as an absence. To retake the test, you will need to make a new appointment. Subject 1 test content: Basic knowledge of motor vehicles; laws, regulations, and road traffic signals; fundamentals of safe and civilized driving; basic knowledge related to motor vehicle operation. Subject 1 test procedure: Follow staff instructions to collect your driving school file in order at the waiting area; Bring and present your ID card for inspection by the supervising officer; Mobile phones must be turned off upon entering the test area; No loud talking is permitted in the test area; Regulation textbooks are not allowed in the examination room (or must be kept in your bag); After the test, keep your ID card safely and submit the file to the "Document Submission Window" at the front of the test center; Candidates who pass the test should sign under staff guidance at the exit before leaving; Candidates who fail can leave immediately and await notification from their driving school regarding retake arrangements.
8
4
Share

How many points are deducted for gear mismatch in Subject 3?

Subject 3 gear mismatch deducts 10 points. Subject 3 exam gear and speed usage: first gear at 0-15 km/h, second gear at 15-25 km/h, third gear at 20-35 km/h. As long as the examinee switches between the specified speed and gear, and the gear matches the speed, it is acceptable. Below are specific introductions to car shifting techniques: Downshift after deceleration: Increase the speed before upshifting, and reduce the speed by releasing the throttle before downshifting. Before shifting, the clutch pedal must be fully depressed, and the gear lever should be operated lightly, quickly, gently, and accurately. Master the timing of shifting: Shift when the engine speed is around 2000 RPM. Press the accelerator first and then the clutch, so the clutch won’t be forced to disengage, then shift. Downshift according to the speed. Generally, downshift when the engine speed is below 1500 RPM. The shifting action should be smooth: Depress the clutch fully in one motion, and shift gears in one step. Familiarize yourself with the gear positions. If you encounter difficulty shifting into gear, shift to neutral, release the clutch slightly, and depress the clutch again to shift into gear.
18
5
Share

What is the Automotive Engine Oil Grade Reference Chart?

According to the SAE viscosity grade classification, there are 6 types of winter engine oils (0W, 5W, 10W, 15W, 20W, 25W), 5 types of summer engine oils (20, 30, 40, 50, 60), and 16 types of all-season engine oils (5W20, 5W30, 5W40, 5W50, 10W20, 10W30, 10W40, 10W50, 15W30, 15W40, 15W50, etc.). Introduction: Engine oil, also known as engine lubricant (English name: Engine-oil), with a density of approximately 0.91×10³ (kg/m³), serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption for the engine. It is often referred to as the "blood" of a car. Composition: Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of lubricants, determining their fundamental properties, while additives compensate for and enhance the shortcomings of the base oil, imparting new characteristics. Additives are an essential part of lubricants.
1
2
Share

What is the fuel tank capacity of the 9.5th generation Accord?

65L. Below is additional information: Generally, small cars have a fuel tank capacity of 35-45 liters, while mid-size cars have a fuel tank capacity of around 55-75 liters. A full tank typically allows a driving range of about 500 kilometers. The fuel tank size is designed based on the vehicle's displacement and fuel consumption—larger fuel consumption means a larger tank, and smaller fuel consumption means a smaller tank. Generally, the fuel tank capacity is designed to allow a driving range of 400-600 kilometers. Lighter vehicles with smaller displacements tend to have smaller fuel tanks, while heavier vehicles with larger displacements naturally have larger fuel tanks. However, most full-tank ranges fall between 400-600 kilometers, with the exception of some off-road vehicles. Precautions for using the car fuel tank: It is necessary to clean the fuel tank regularly. When going to a gas station, if you see a gasoline truck unloading, it is best not to refuel at that station and instead go to another one. This is because when gasoline is being unloaded, sediment and impurities in the storage jar may be stirred up, leading to a higher chance of these impurities entering your fuel tank.
1
4
Share

What is the speed limit on a three-lane highway?

On a three-lane highway, the speed limits are as follows: the right lane is for speeds between 60-90 km/h. The three lanes consist of the fast lane, the overtaking lane (for small passenger vehicles) with speeds ranging from 90-120 km/h; the travel lane and the slow lane for large vehicles with speeds between 60-90 km/h, and the left lane for speeds of 110-120 km/h. Pedestrians, non-motorized vehicles, tractors, wheeled special machinery vehicles, articulated buses, full trailers, and other motor vehicles with a maximum design speed of less than 70 km/h are not allowed on highways. The maximum speed indicated by highway speed limit signs must not exceed 120 km/h. When entering the highway from an on-ramp, motor vehicles should use the left turn signal and merge into the travel lane without obstructing the normal flow of traffic already on the highway. Additionally, there is a fourth lane, commonly referred to as the emergency lane. The highway emergency lane is reserved exclusively for emergency vehicles, including police cars, fire trucks, ambulances, and engineering rescue vehicles when performing urgent tasks. Vehicles experiencing sudden breakdowns or passengers with sudden medical emergencies may also use the emergency lane. Other vehicles are prohibited from stopping or driving in the emergency lane under non-emergency circumstances.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.