What is the normal fuel consumption for a new Honda Vezel?

3 Answers
RuthLynn
07/29/25 12:09pm
The fuel consumption for a new Honda Vezel is generally considered normal at 7-8 liters per 100 kilometers. Below are specific tips on how to save fuel for the Vezel: Driving Habits: Drivers should cultivate good driving habits, such as avoiding sudden braking, cold starts, and other fuel-consuming operations. Speed Control: The most fuel-efficient speed for the car is between 70-90 km/h. Maintaining this speed can help achieve the lowest fuel consumption. Maintaining Good Vehicle Condition: If the engine's fuel efficiency decreases, the car's fuel consumption will naturally increase. Therefore, keeping the vehicle in good condition is crucial for fuel savings.
Was this review help?
10
2
Share
DiElisa
08/13/25 10:16pm
I've been driving my new Honda HR-V for three months now. Under normal conditions, the fuel consumption is typically between 8.5 to 9.5 liters per 100 kilometers in city driving, and it can drop to around 6.5 to 7 liters on highways. During the first 1,000 kilometers, the fuel consumption might be slightly higher as the engine is in the break-in period, but it will stabilize over time. There are several factors that affect fuel consumption, such as rapid acceleration and hard braking, which can cause a significant spike in fuel usage. Frequent stop-and-go traffic, using air conditioning, or carrying a full load of luggage can also increase fuel consumption. I recommend developing a gentle driving habit, avoiding frequent lane changes, and regularly checking tire pressure to maintain it around 2.5 bar. For a new car, fuel efficiency usually improves after driving 2,000 to 3,000 kilometers. Additionally, using air conditioning in hot summer weather might increase fuel consumption by about half a liter, but overall fluctuations between 7 to 11 liters per 100 kilometers are considered normal and nothing to worry too much about.
Was this review help?
17
3
Share
Expand All
CharlesRose
10/09/25 2:02am
I have some insights on fuel consumption. The official combined cycle fuel consumption for the new Honda Vezel is approximately 7.5 liters per 100 kilometers. In actual urban driving conditions, it may reach 8-10 liters, while on highways it's around 6-7 liters. Engine technologies like Earth Dreams help optimize efficiency, but since the new engine hasn't fully broken in yet, slightly higher initial fuel consumption is normal. Poor tire grip or clogged air filters can affect fuel economy, so it's recommended to check these components during each maintenance for new cars. Driving style is most crucial - smooth acceleration and maintaining constant speed can save over 5% fuel. Using AC in extreme cold or hot weather increases load, raising consumption by about 0.5 liters. If it consistently stays around 7.5 liters, it indicates good vehicle condition.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

What Causes the Conflict Between CarPlay Navigation and Music Audio?

There are several scenarios to analyze regarding the conflict between CarPlay navigation and music audio: 1. CarPlay navigation voice directly interrupts the music audio: This situation can be resolved by selecting a different audio mixing mode in the navigation settings. For example, when using maps, you can choose the accessibility option in the navigation settings within the settings menu and set the audio mixing mode to 'lower music volume' to prevent the music from being directly interrupted. 2. Music audio stutters during CarPlay navigation voice prompts: There are many possible reasons for this, such as insufficient phone memory, poor phone network connection, issues with the phone's data cable, problems with the car's infotainment system, or incompatibility between the navigation and music apps. The solution should be determined based on the specific cause of the problem.
2
2
Share

How to activate truck ETC?

Truck ETC activation process: Insert and remove the ETC card twice consecutively until the electronic tag screen displays 'Bluetooth is on'. If 'Tag invalid' appears when inserting and removing twice without attaching the electronic tag, this is normal and does not affect activation. Alternatively, you can directly press the button on top of the electronic tag to enable Bluetooth. Turn on your phone's Bluetooth, open the corresponding mobile app (usually there's a download QR code on the electronic tag), and enter the device activation interface. Click 'Device Connection' and wait patiently for the 'Connection Successful' prompt. After successful connection, upload a photo of the vehicle's front to complete activation. Truck ETC installation position: For large vehicles like trucks, ETC should be installed in the middle-lower part of the front windshield; For small vehicles like cars and vans, the ETC card and OBU device should be installed in the middle-upper part of the front windshield.
3
1
Share

What Are the Criteria for Replacing Car Tires?

The criteria for replacing car tires include: the tire rubber aging to the critical point of deterioration, the tire being worn down to the wear indicator, bulging on the tire sidewall, deformation or bulging on the tread, the tire leaking and being irreparable, unexplained noises during driving, uneven wear, misalignment, and abnormal wear. Lifespan of Car Tires: The lifespan of car tires is generally 3-5 years or a mileage of 60,000-80,000 kilometers under normal driving conditions. However, depending on the driver's habits, road conditions, and parking environment, the lifespan of car tires may vary. Hazards of Using Expired Tires: Expired tires suffer from rubber aging, making them prone to cracking, reduced flexibility, and severely diminished heat dissipation. This not only drastically reduces comfort but also significantly impairs acceleration and braking performance. High-speed driving with expired tires carries the risk of a blowout. Therefore, expired tires must be replaced, even if the wear has not yet reached the wear indicator. Method for Replacing Tires: Park the car, turn off the engine, and engage the handbrake to prevent sliding. Loosen the bolts in a diagonal sequence. Jack up the vehicle to a certain height. Remove the bolts and take off the old tire. Install the new tire and tighten the anti-theft bolts in a diagonal sequence. Lower the vehicle and tighten the bolts and nuts. Precautions for Tire Replacement: Choose tires of the same specifications, replace the valve stem at the same time, pay attention to the installation direction and inflation, check the tire pressure, perform a four-wheel alignment after replacement, slightly loosen the fixing bolts before using the jack to partially lift the vehicle, and select tires with guaranteed quality.
15
0
Share

What does the physical examination for driver's license renewal include?

The items for the driver's license renewal physical examination are mainly as follows: 1. Height: Applicants for large buses, tractors, city buses, large trucks, and trolleybuses must be at least 155 cm tall. Applicants for medium-sized buses must be at least 150 cm tall. 2. Hearing: The ability to distinguish the direction of sound sources with each ear at a distance of 50 cm from the fork. 3. Upper limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact, with normal limb and finger movement functions. 4. Lower limbs: Normal movement function. Applicants for driving manual transmission cars must have a lower limb length difference of no more than 5 cm. Applicants for driving automatic transmission cars must have a sound right lower limb.
7
2
Share

How to Repair Loud Valve Noise?

The repair methods for loud valve noise are: 1. Remove the cylinder head, grind the valves, check the spring tension of the valve springs, and readjust the valve clearance; 2. Readjust the valve clearance properly. If the locking nut on the adjustment screw is loose, it should be securely tightened. Replace severely worn components; 3. Replace any broken valve springs; 4. Reinstall the valve seat so that its upper surface is flush with the body plane. Grind down any protruding parts to make them level. The causes of loud valve noise are: 1. Damage or poor sealing of the hydraulic tappet itself; 2. Improper use of engine lubricating oil; 3. Noise during cold starts that disappears as the temperature rises.
11
0
Share

Where is the fuel injector installed?

The fuel injector is installed on the intake manifold or cylinder head. The fuel injector is a simple solenoid valve. When the electromagnetic coil is energized, it generates suction force, lifting the needle valve to open the injection hole. Fuel is sprayed at high speed through the annular gap between the needle valve head and the injection hole, forming a mist that facilitates complete combustion. The reasons for fuel injector sticking include: 1. Unclean diesel with impurities in the high-pressure fuel line causing the needle valve pair to not close tightly; 2. Excessive engine temperature leading to poor injector cooling; 3. Wear of the outlet valve causing carbon buildup on the injector; 4. Low injection pressure resulting in backflow of high-pressure combustion gases into the combustion chamber; 5. Overly tight fit between the injector installation hole on the cylinder head and the injector.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.