What is the normal engine oil temperature in summer?

2 Answers
LaCora
07/29/25 2:14am
An engine oil temperature of 100 degrees is normal, as the working temperature of engine oil typically ranges between 70 to 90 degrees. Below is relevant information about automotive engine oil: Functions of engine oil: Alleviate friction and high temperatures, reduce gas leakage, prevent external contaminants, protect against contact between water, air, acidic harmful gases and components, cushion the rising pressure in engine cylinder ports, and clean dirt generated on component surfaces. Introduction to engine oil: Engine oil, also known as engine lubricant, serves to lubricate and reduce wear in the engine, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. It is often referred to as the 'blood' of a car. Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of lubricants, determining their fundamental properties, while additives compensate for and enhance the shortcomings of the base oil, imparting new characteristics, making them an essential part of lubricants.
Was this review help?
11
3
Share
DePaisley
08/12/25 6:14am
I've been driving for decades, and in summer, the oil temperature usually stays between 90 to 110 degrees Celsius, which is the ideal range. During long-distance drives or city traffic jams, the temperature might rise to 120, but if it consistently exceeds 120, you need to pay attention. I remember one summer on the highway when the temperature gauge shot up to 125, and I immediately pulled over to check, only to find the cooling fan was stuck. High temperatures thin out the oil, reducing its lubricating effectiveness and making engine components more prone to wear. In severe cases, it can even lead to engine seizure. You need to be extra careful when driving in summer—use digital gauges to monitor the temperature regularly and switch to full synthetic oil, which handles heat better. Also, make sure the coolant is topped up and the radiator is clean. These small habits can help you avoid major repairs, saving both money and hassle.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

What are the classifications of brakes?

Brakes can be classified as follows: 1. By friction: Friction brakes, which rely on the friction between the brake component and the moving part to brake. Non-friction brakes, whose structural forms mainly include magnetic particle brakes (using the shear force generated by magnetizing magnetic particles to brake), eddy current brakes (adjusting the braking torque by regulating the excitation current), and water eddy current brakes. 2. By brake component structure: Divided into external block brakes, internal expanding shoe brakes, band brakes, disc brakes, etc. 3. By working state: Divided into normally closed brakes (usually in a tightened state, requiring external force to release the brake) and normally open brakes (usually in a released state, requiring external force to brake). 4. By control method: Divided into manually operated, hydraulic, pneumatic, and electromagnetic brakes.
19
5
Share

How to Add Coolant to a Car?

Steps to add coolant to a car: 1. Ensure the engine is in a cold state; 2. Open the hood and locate the engine's coolant reservoir; 3. Turn the reservoir cap counterclockwise to open it, then open the drain valve to flush and clean the interior; 4. Directly refill the reservoir with the same specification of coolant until the liquid level reaches the maximum mark; 5. After filling, securely close the reservoir cap. The full name of coolant should be antifreeze coolant, meaning it has antifreeze properties to prevent the coolant from freezing during cold seasons, which could otherwise crack the radiator or damage the engine block. Antifreeze is not just for winter use; it should be used year-round. As part of regular car maintenance, the engine antifreeze should be replaced once every year.
20
4
Share

Which Civic Model is the Most Classic?

The most classic Civic model is the tenth-generation Civic. The tenth-generation Civic has high aesthetic appeal: The all-new tenth-generation Honda Civic is considered the most visually appealing compact sedan, with its exterior design receiving high praise internationally. Moreover, the tenth-generation Honda Civic is particularly well-suited for modifications. The tenth-generation Civic offers spacious interiors: Not only does the tenth-generation Honda Civic boast high aesthetic appeal, but it also provides ample interior space, numerous storage compartments, and a spacious rear seating area, ensuring good comfort for passengers. The tenth-generation Civic is fuel-efficient: The tenth-generation Honda Civic is relatively fuel-efficient, with a combined fuel consumption of around 6 liters per 100 kilometers.
16
4
Share

How many kilometers should a new car's gear oil be changed for the first time?

It is recommended to change the gear oil every 60,000 kilometers for a new car. Below are the specific details about gear oil: 1. Composition: Gear oil is primarily made from petroleum lubricating base oil or synthetic lubricating oil, mixed with extreme pressure anti-wear agents and oiliness agents to form an important type of lubricating oil. 2. Function: It is used in various gear transmission devices to prevent gear surface wear, scuffing, sintering, etc., thereby extending their service life and improving power transmission efficiency. 3. Characteristics: Gear oil should have excellent anti-wear and load-bearing properties, along with appropriate viscosity. Additionally, it should possess good thermal oxidation stability, anti-foaming properties, water separation performance, and rust prevention capabilities.
3
3
Share

Does the BMW X5M have air suspension?

BMW X5M has air suspension. How air suspension works: The air suspension system mainly consists of a control computer, air compressor, pressure storage tank, pneumatic front and rear shock absorbers, and an air distributor. Functions of air suspension: Body level control, body level adjustment, and ADS function are achieved by using an air compressor to generate compressed air, which is then delivered to the air chambers of the springs and shock absorbers. Height sensors are installed near the front and rear wheels. Based on the output signals from these height sensors, the vehicle's computer determines changes in the vehicle's height and controls the compressor and exhaust valves to compress or extend the springs, thereby achieving shock absorption effects and altering the vehicle's height.
5
2
Share

Where is the fuel pump module located in the Bentley Continental?

The fuel pump module of the Bentley Continental is located inside the oil pan within the engine. Function of the fuel pump: The fuel pump serves as the interface between the high-pressure and low-pressure fuel circuits. Its function is to generate fuel pressure in the common rail by controlling the fuel output. Its role is to increase fuel pressure, enabling high-pressure injection to achieve atomization. Purpose of the fuel pump: The main purpose of the fuel pump is to act as a power source for hydraulic devices such as jacks, heading machines, extruders, and cotton gins. Installation precautions for the fuel pump: During the installation of the fuel pump, all openings should be covered to prevent foreign objects from falling into the machine.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.