What is the normal discharge current for a vehicle?

What is the fuel consumption per 100 kilometers for a 5.0L engine?

5.0L engine's fuel consumption per 100 kilometers mainly includes the following aspects: 1. When driving on urban roads, the fuel consumption of a 5.0L engine is approximately between 18-20L per 100 kilometers. 2. When driving on highways, the fuel consumption of a 5.0L engine is approximately between 11-13L per 100 kilometers. Additional information: 1. Generally, fuel consumption cannot be simply judged by engine displacement. Road conditions are the most important factor, followed by driving habits, load conditions, vehicle weight, engine and transmission specifications, and other aspects. 2. The fuel consumption displayed on the dashboard is not the actual fuel consumption and is often lower than the real value. Car owners can use fuel consumption calculation software, which generally only requires inputting the refueling amount and driving mileage to calculate the car's fuel consumption. Some software also has fuel consumption records, which can show the recent fluctuations in fuel consumption.

17

0

Share

Where is the vehicle longitudinal acceleration sensor located?

Longitudinal acceleration sensors typically do not have a fixed position. In most vehicle models, they are installed near the front of the vehicle's center of gravity. Of course, a single vehicle may have multiple longitudinal acceleration sensors, such as on the wheels or B-pillars. Their function is to detect the phenomenon of vehicle lift or dive during acceleration or braking, in order to control the adjustment of ADS damping force on the front and rear axles, thereby providing optimal ride comfort. Below is the working principle of acceleration sensors: 1. The sensing element converts the acceleration signal at the measurement point into a corresponding electrical signal, which enters the preamplifier circuit. After signal conditioning to improve the signal-to-noise ratio, it undergoes analog-to-digital conversion to obtain a digital signal, which is then sent to a computer for data storage and display. 2. Automotive acceleration sensors operate on the principle that an object's inertial coefficient generates varying pressures under different accelerations, using different resistances to distinguish between different acceleration levels. Vehicle body acceleration sensors are primarily used in ABS systems and airbags.

17

5

Share

Why Does the Car Fuel Gauge Needle Not Move?

The fuel gauge needle not moving is usually due to a damaged fuel float. It is recommended to go to a repair shop to connect the two wires of the fuel float. If the fuel gauge needle reaches the top, it means the fuel float is damaged. If it still doesn't move, check the wiring and the instrument panel. If the needle doesn't move right after filling up the tank, it's because the fuel float is pushed to the top of the tank by the buoyancy of the fuel, and the sensor-connected needle won't move. Only after consuming some fuel and the float descends will the needle move with the sensor. Below is an introduction to car instruments: 1. Car instruments consist of various gauges, indicators, and especially warning lights and alarms, providing the driver with necessary vehicle operation parameters. According to their working principles, car instruments can be roughly divided into three generations. The first generation is mechanical gauge movements; the second generation is called electrical instruments; the third generation is fully digital car instruments, which are networked and intelligent, with more powerful functions, richer display content, and simpler wiring connections. 2. The car fuel gauge mainly displays the amount of gasoline in the fuel tank. This gauge usually doesn't have issues. It's worth noting that when the fuel gauge needle is below the minimum red line, the car can still travel 30-40 kilometers, but it is still recommended not to wait until the needle reaches the bottom or the fuel warning light comes on before refueling, as cars use electric fuel pumps.

8

5

Share

Where is the cabin air filter located in a Volvo S80?

Volvo S80's cabin air filter is located under the glove compartment on the passenger side. The replacement method for Volvo S80's cabin air filter is: 1. Remove the screws of the cover panel under the glove compartment; 2. Take off the cover panel and filter cover to replace. The Volvo S80 has body dimensions of 4991mm in length, 1861mm in width, and 1490mm in height, with a wheelbase of 2976mm. The Volvo S80 features MacPherson strut independent front suspension and multi-link independent rear suspension. It is equipped with a 2.4L naturally aspirated engine producing maximum power of 170PS (125kW) and peak torque of 225Nm, mated to a 5-speed automatic transmission.

1

0

Share

How Many Types of Brake Pad Materials Are There?

There are five types of automotive brake pad materials: asbestos, metal, ceramic, and high-carbon (titanium) fiber. Automotive brake pads generally consist of a steel plate, an adhesive insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 furnace temperature tracker to ensure quality by detecting temperature distribution. Below is an introduction to these five types of brake pads: 1. Asbestos material: Low cost and lightweight, widely used in trucks and construction vehicles. 2. Semi-metallic material: This is the default material for brake pads in all vehicle models upon factory release. These brake pads have a relatively low friction coefficient, typically around 0.38, and a shorter lifespan. Some manufacturers produce these pads with a higher friction coefficient, though this can lead to noise issues. 3. Metal material: Metal materials include iron and copper. One type is commonly referred to as wear-resistant iron, appearing very dark with no visible spots. Another type contains copper powder, where brass or copper metal blocks or small particles can be seen on the surface. 4. Ceramic brake pads: Moderate density, high-temperature resistance, corrosion resistance, and significantly lower noise compared to metal materials. A key feature is minimal dust production. Genuine ceramic brake pads contain aramid fibers, offering far superior lifespan and performance compared to the above-mentioned types. 5. High-carbon (titanium) fiber: Used in high-end vehicles and relatively rare in the market. Carbon (titanium) fiber is an upgraded version of ceramic pads. They are lightweight, high-strength, have a small thermal expansion coefficient, good thermal conductivity, and heat resistance. Carbon fiber provides stable friction curves, minimal thermal impact on friction surfaces, and wear resistance over 1.5 times that of standard ceramic pads.

20

1

Share

What engine is equipped in the Geely King Kong?

Geely King Kong is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 102ps, a maximum power of 75kw, and a maximum torque of 141nm, paired with a 5-speed manual and automatic transmission. The dimensions of the Geely King Kong are: length 4342mm, width 1692mm, height 1435mm, wheelbase 2502mm, minimum ground clearance 158mm, fuel tank capacity 45L, and curb weight 1103kg. The front suspension of the Geely King Kong is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. The Geely King Kong is equipped with 185/60R15 front tires and 185/60R15 rear tires.

11

0

Share

What is the normal discharge current for a vehicle?

What is the fuel consumption per 100 kilometers for a 5.0L engine?

Where is the vehicle longitudinal acceleration sensor located?

Why Does the Car Fuel Gauge Needle Not Move?

Where is the cabin air filter located in a Volvo S80?

How Many Types of Brake Pad Materials Are There?

What engine is equipped in the Geely King Kong?

Will Car Perfume Explode in Summer?

Is It Illegal to Install a Rear Spoiler on a Car?

Why Does a Car Windshield Crack Spontaneously?

How long is the lifespan of an auto start-stop battery?