What is the normal atmospheric pressure for a car in kPa?

1 Answers
LeClayton
07/30/25 7:54am
Generally, the normal tire pressure for a car ranges between 230-250 kPa. However, the specific normal tire pressure should be based on the manufacturer's recommended value, which can be found in the car's user manual, on the label near the driver's side door (B-pillar), in the drawer next to the driver's seat, or on the small door of the fuel tank cap. Additional information: According to the international standard GBT2978-2008, the unit bar is used for calculation: 1. Standard tire pressure: 2.4-2.5 bar; 2. Reinforced tire pressure: 2.8-2.9 bar; 3. Maximum tire pressure: should not exceed 3.5 bar.
Was this review help?
19
4
Share
More Forum Discussions

Is it mandatory to wear seat belts in the back seat?

It is mandatory to wear seat belts in the back seat. When driving a car, both front and rear passengers must wear seat belts. Whether you are the driver or a passenger, as long as you are in the vehicle, you must wear a seat belt. Both front and rear passengers must wear seat belts. When riding in a vehicle, whether you are seated in the front or the back, you need to wear a seat belt. Especially for drivers, it is essential to correctly fasten the seat belt in accordance with China's traffic laws and avoid any improper fastening behaviors. If seat belts are not worn correctly as required, collisions between vehicles can easily lead to traffic accidents, endangering lives. Passengers in the back seat must also wear seat belts properly; otherwise, they may be thrown forward during a collision, causing secondary injuries to front-seat occupants. Not wearing a seat belt will result in fines. According to China's "Road Traffic Safety Violation Points System," drivers who fail to wear seat belts will be penalized with a deduction of two points. Both drivers and passengers must use seat belts correctly as required by law. Rear-seat passengers must also wear seat belts; failure to do so may result in fines, with specific penalties varying by city and local regulations. Not wearing a seat belt poses many dangers. Drivers who do not wear seat belts are at risk of hitting the windshield or even being ejected from the vehicle during a collision. Front-seat passengers who do not wear seat belts may suffer injuries from deploying airbags. Rear-seat passengers must also wear seat belts; otherwise, in the event of an accident, they may sustain severe head injuries.
20
3
Share

How to Cancel a Driving Practice Appointment?

Call the driving school directly to cancel and also inform the coach that you won't be attending. Generally, it's best to cancel at least half a day in advance; otherwise, the cancellation may not be processed, and it will still count as if you attended, affecting your practice session count. Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment, referred to as the field driving skill test. For small cars (C1/C2), the test items include five mandatory components: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-turns). If any of the following behaviors occur during the test, the current subject test will be terminated, the score will be invalidated, and a new test appointment will be required: 1. Answering phone calls or checking pagers; 2. Disrupting the order within the test area; 3. Making loud noises or disobeying the management of the staff.
20
1
Share

How to Brake Slowly and Steadily?

To brake slowly and steadily, different techniques should be applied according to different situations. Below are introductions from four aspects: smooth braking, braking on curves, braking to prevent rear-end collisions when following a car, and braking on slopes. Smooth Braking Techniques: Many beginners struggle with mastering the timing and force of braking, often resulting in harsh braking. When the braking distance is sufficient, press the brake pedal slowly and continuously to decelerate evenly. As the vehicle is about to stop, gradually release the brake pedal until it is fully lifted when the car comes to a complete stop. After parking, placing a temporary parking sign can provide additional peace of mind. Braking Techniques on Curves: When approaching a curve, brake before entering the curve, decelerate slowly to enter the curve, and then accelerate out of it. While braking on a curve, steer the wheel to adjust the car's posture according to the curve's arc. Avoid slamming on the brakes, especially if you are in the outer lane, to prevent losing control of the vehicle. Braking Techniques to Prevent Rear-End Collisions When Following a Car: The main purpose of braking when following another car is to maintain a safe distance from the vehicle in front. This means using the brake to keep a speed that is roughly the same as the car ahead. Therefore, the key technique is to press the brake pedal gently and maintain braking force. If you notice the car in front braking, move your foot to the brake pedal in advance to prepare for sudden braking by the leading car. For added safety, consider installing anti-collision strips on your vehicle. Braking Techniques on Slopes: Braking on an uphill slope is similar to braking on flat roads, but due to the deceleration effect caused by the vehicle's weight, the braking force required is slightly less than on flat roads. Brake gently on an uphill slope, even more gently than on flat roads, but release the brake pedal faster than you would on a flat road to ensure the speed does not drop excessively.
7
5
Share

Does the Baojun 730 require fuel tank removal for fuel pump replacement?

Baojun 730 requires fuel tank removal for gasoline pump replacement. Below is a detailed introduction about the new Baojun 730: 1. Powertrain: The new Baojun 730 automatic transmission model is equipped with a 6-speed wet dual-clutch transmission. This automatic transmission can withstand a maximum torque of 360N·m, and features BorgWarner's pre-engagement technology paired with dual-clutch adaptive control, enabling rapid gear shifts in just 0.2 seconds. The powertrain still employs the P-Tec-DVVT 1.5T turbocharged engine, which delivers a maximum power of 150 horsepower (110 kW) at 5500 rpm and a peak torque of 230 N·m between 2000-3800 rpm. 2. Configuration Parameters: The Baojun 730 hybrid version has a combined fuel consumption of 6.7L per 100 km. The gasoline-powered 1.5T variant of the Baojun 730 consumes 7.0L per 100 km. Compared to the gasoline model, the hybrid version reduces combined fuel consumption by 0.3L per 100 km, demonstrating better fuel efficiency.
12
5
Share

Can AT Tires Be Used for Long-Distance High-Speed Driving?

AT tires can be used for long-distance high-speed driving. Here is some information about AT tires: 1. AT tires: Refers to all-terrain tires, which feature bold and rugged tread designs with larger gaps between the treads. 2. Suitable vehicles: These are the most widely used tires for off-road vehicles. Due to their rugged tread patterns and larger gaps between the tread blocks, AT tires are more suitable for driving on unpaved roads, but they produce more noise and consume more fuel. Here is some information about car tires in general: 1. Car tires: They are one of the most important components of a car, directly in contact with the road surface, working together with the car's suspension to absorb shocks during driving. 2. Functions: Ensure a comfortable ride and smooth driving experience; provide good traction between the wheels and the road surface; improve the car's traction, braking, and off-road capabilities; and support the weight of the car.
6
4
Share

How to Solve Three-Cylinder Engine Vibration?

Three-cylinder engine vibration can be addressed by: 1. Air filter: Replace the filter. 2. Spark plugs: Replace the spark plugs. 3. Fuel injectors: Clean the fuel injectors. 4. Carbon deposits: Remove carbon deposits and oil sludge. Below is an introduction to related content: 1. Basic principle: A three-cylinder engine is composed of three cylinders. The fundamental principle involves converting the chemical energy of gasoline (or diesel) into thermal energy. The combustion of the mixed gas in the sealed cylinder causes expansion, which drives the piston to perform work, thereby transforming thermal energy into mechanical energy. 2. Classification: The automobile engine is the power-generating device of a car, serving as its heart. It determines the car's power, fuel efficiency, stability, and environmental friendliness. Depending on the power source, automobile engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid systems, among others.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.