What is the Nissan Juke called in China?

1 Answers
StHazel
07/30/25 6:50am
The Nissan Juke is called Dongfeng Nissan in China. Its product lineup includes two major categories: sedans and SUVs. The sedan models are: Sunny, Livina, Tiida, Sylphy, Sylphy Zero Emission, and Teana. The SUV models are: Kicks, Qashqai, X-Trail, Murano, Murano Hybrid, and Terra. Taking the 2021 Sylphy as an example, its body dimensions are: length 4641mm, width 1815mm, height 1450mm, wheelbase 2712mm, front/rear track 1540mm, minimum ground clearance 167mm, fuel tank capacity 47L, trunk capacity 560L, and curb weight 1243kg.
Was this review help?
4
2
Share
More Forum Discussions

What engine is used in the Yuexiang v3?

Yuexiang v3 is equipped with 1.3L and 1.4L naturally aspirated engines, which are independently developed by Changan. Below are the relevant details about the Yuexiang v3 engines: The 1.3L naturally aspirated engine in the Yuexiang v3 delivers 94 horsepower and a maximum torque of 121 Nm. The engine's maximum torque speed ranges from 4000 to 5000 rpm, and its maximum power speed is at 6000 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. The 1.4L naturally aspirated engine in the Yuexiang v3 delivers 101 horsepower and a maximum torque of 135 Nm. The engine's maximum torque speed ranges from 3500 to 4500 rpm, and its maximum power speed is at 6000 rpm. This engine also features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block.
3
4
Share

What Lights to Use When Driving in Heavy Rain at Night?

When driving in heavy rain at night, you should turn on the headlights, hazard lights, or front fog lights. When the rain is heavy, water on the road can be kicked up by the tires of the vehicle in front, creating a mist that significantly affects visibility. In such conditions, it is advisable to use headlights or front fog lights. Hazard lights help other drivers and pedestrians notice your vehicle more quickly in poor visibility. Below are some precautions for driving in the rain: Avoid Potholes and Flooded Areas: Try to avoid traveling during heavy rainstorms. If you must drive, slow down, plan your route in advance, and steer clear of potholes and flooded sections. Reduce Speed and Drive Cautiously: The most important rule for driving in the rain is to slow down, maintain a safe distance from other vehicles, stay alert, and avoid complacency. In low-visibility conditions, pay attention to changes in the lights of other vehicles.
10
1
Share

Is It Normal for Water Mist to Appear at Car Air Conditioning Vents?

Normal. This occurs because cold air emitted from the vents meets the warm air inside the car, naturally condensing into water droplets at the air conditioning outlets. Below is relevant information: Condensation: "Condensation water" may appear at air conditioning vents: The dew point (or frost point) temperature refers to the temperature at which air, under constant humidity and pressure, cools to saturation. It is the temperature at which water vapor in the air turns into dew. Normal phenomenon: In hot summer regions with high indoor humidity, the dew point temperature of the air is relatively high. When the supply air temperature is lower than the dew point temperature of the indoor air, condensation and dripping of condensation water will occur at the louvered vents of the air conditioner, especially during the initial period after startup. This is a normal phenomenon. Condensation at air conditioning vents is not a quality issue; on the contrary, it indicates that your car's air conditioning has excellent cooling performance.
18
1
Share

What is the function of an exhaust gas turbocharger?

An exhaust gas turbocharger is mainly composed of a turbine and a compressor. The relevant introduction of the exhaust gas turbocharger is as follows: Working Principle: The exhaust gas discharged from the engine is introduced into the turbine, and the energy of the exhaust gas is used to drive the turbine to rotate, thereby driving the compressor coaxial with the turbine to achieve supercharging. The turbine inlet is connected to the engine exhaust manifold, and the exhaust port is connected to the exhaust pipe; the compressor inlet is connected to the air filter, and the exhaust port is connected to the intake manifold. Type Classification: Exhaust gas turbochargers can be divided into single-stage supercharging and two-stage compound supercharging based on the number of turbochargers. Ordinary vehicles commonly use a single-stage supercharging system, which employs one exhaust gas turbocharger; while a two-stage supercharging system uses two exhaust gas turbochargers, mainly used in large-displacement diesel engines for vehicles.
16
0
Share

What Causes Insufficient Power When the Car Air Conditioner is On?

The reason for insufficient power when the car air conditioner is on is that the car air conditioner is driven by the engine. The power of the air conditioning compressor comes from the car engine, so during the operation of the air conditioner, some power is also consumed, making the car feel sluggish when accelerating and underpowered. Extended Content: Introduction: The car air conditioning system, abbreviated as car AC. Function: It is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car cabin to the optimal state, providing a comfortable riding environment for passengers and reducing travel fatigue; it creates good working conditions for the driver and plays an important role in ensuring safe driving as a ventilation device. It generally includes a refrigeration unit, heating unit, and ventilation unit. This combined system makes full use of the limited space inside the car, with a simple structure and easy operation.
6
2
Share

How to Deal with Fog on the Outside of the Car's Windshield?

To address fog on the outside of the car's windshield, you can follow these methods: 1. Turn on the car's heater and direct it towards the windshield to reduce the temperature difference between the inside and outside of the glass, preventing condensation and fogging; 2. Open a small gap in the window to allow air circulation, which helps remove moisture and balance the temperature inside and outside the car; 3. Apply a solution of dish soap, soapy water, or saltwater to the windshield and wipe it clean. The windshield is made by sandwiching two layers of glass with a layer of PVC plastic in between, creating a laminated glass structure similar to a sandwich. It is typically designed as a large, curved single-piece unit with specific curvatures on all sides, making both its manufacturing and installation processes highly technical.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.