What is the new name of the Prado?

Why Won't My Car Start After Stalling?

The reasons why a car stalls and won't start include: throttle valve malfunction, fuel pump failure to supply fuel, timing belt breakage, and coolant temperature sensor failure. The specific cause needs to be analyzed based on detailed circumstances. If encountering a no-start situation, it is recommended to directly contact a repair shop or 4S store for professional servicing to avoid other unnecessary damages. Throttle valve malfunctions are often caused by excessive carbon buildup. Excessive carbon buildup in the idle motor may also cause the car to stall while coasting. When the throttle position sensor fails, it can lead to inaccurate data received by the sensor, resulting in excessively high engine idle speed and also causing the car to fail to start after normal stalling.

4

5

Share

How to Open the Engine Hood of a Mercedes-Benz C200?

To open the engine hood of a Mercedes-Benz C200, follow these steps: The engine hood release handle is located below the steering wheel on the left side, which is a black handle. After pulling it, there is a safety catch under the hood; push it to the right with your hand, then lift the hood. The Mercedes-Benz C200 is a model under the Mercedes-Benz brand, with body dimensions of 4784mm in length, 1810mm in width, and 1457mm in height, and a wheelbase of 2920mm. In terms of exterior design, the Mercedes-Benz C200 features a stylish and luxurious appearance, with a more dynamic front grille. The scratch-resistant paint is a notable highlight of its exterior. As for the interior, the Mercedes-Benz C200 boasts fine craftsmanship and excellent sound system quality.

16

5

Share

What does 230kpa tire pressure mean?

Tire pressure of 230kpa is equivalent to 2.3bar. 'kpa' stands for kilopascal, a unit of air pressure, and 230kpa refers to the air pressure parameter inside the tire, corresponding to the kilopascal reading on the tire pressure gauge during inflation. Tire pressure, which is the air pressure inside the tire, is essentially the 'blood pressure' of a car. The level of tire pressure plays a crucial role in the performance and power of the vehicle. Tires are circular elastic rubber products mounted on various vehicles or machinery, typically installed on metal rims. They support the vehicle body, cushion external shocks, ensure contact with the road surface, and maintain the driving performance of the vehicle.

7

4

Share

What does the triangular exclamation mark on the dashboard mean?

A triangle with an exclamation mark inside indicates a malfunction in the vehicle's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: It is necessary to visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault indicator in vehicles. Besides the triangular exclamation mark, there are four other forms of exclamation mark indicators: a yellow gear with an exclamation mark inside, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow light bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic transmission fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission malfunction or transmission fluid level below the normal range. Transmission fluid should be replaced promptly. Brake system fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, primarily indicating brake system failure or low brake fluid level. Immediate inspection and repair of the brake system are required to avoid accidents. Tire pressure anomaly: A bracket with a horizontal line and an exclamation mark in the middle represents the tire pressure monitoring warning light, which illuminates when the vehicle's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting fault: A yellow light bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection and repair as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.

1

3

Share

What is the valve clearance for cars?

Car intake valve clearance: 0.15-0.25mm; exhaust valve clearance: 0.25-0.35mm. Below is the method for adjusting valve clearance: 1. Warm up the engine until the coolant temperature reaches 80-90°C. Open the timing mark inspection hole on the clutch housing and the cylinder head cover, ensuring the cylinder head bolts are tightened to the specified torque. 2. Rotate the crankshaft to align the "0" mark on the flywheel with the marking line on the clutch housing. Confirm that the curved surface of the intake and exhaust valve rocker arms of the first cylinder is in contact with the camshaft's cam base circle, meaning the first cylinder piston is at the compression top dead center (if the rocker arm is in contact with the cam, rotate the crankshaft 360°). At this point, the valves are in the closed position. 3. Loosen the lock nut (2) of the adjusting screw (1). Use a screwdriver to turn the adjusting screw so that the gap (A) between the lower end of the screw and the upper end of the valve stem (3) matches the specified clearance value, determined by the thickness of a feeler gauge. Keep the screwdriver steady, tighten the lock nut to the specified torque, and then recheck the gap (A) with the feeler gauge. This completes the adjustment of the intake and exhaust valve clearance for the first cylinder. 4. Then, rotate the crankshaft clockwise (viewed from the front of the engine). For a 4-cylinder engine, every 180° rotation allows adjustment of the valve clearance for the next firing cylinder in the ignition order (1-3-4-2). For a 3-cylinder engine, every 240° rotation allows adjustment in the ignition order (1-2-3). The rotation angle of the crankshaft can be calculated using the number of teeth on the flywheel ring gear.

10

3

Share

What are the methods for cleaning carbon deposits in a car by yourself?

Methods for cleaning carbon deposits in a car by yourself are: 1. Clean the throttle valve: Remove the engine cover, take off the throttle valve, and clean it with carburetor cleaner, then wipe it dry with a cotton cloth and reinstall it; 2. Clean internal engine carbon deposits: Open the oil cap, pour in the entire can of cleaner (mixed with old engine oil), close the oil cap, start the engine and let it idle for 10 minutes before turning it off; 3. Clean fuel system carbon deposits: Add the entire bottle of fuel additive to the fuel tank before refueling; 4. Clean intake system carbon deposits: Buy a bottle of intake system cleaner, pour it into the liquid storage tank of a dedicated cleaning device, connect it to the intake system, and use the vacuum to draw the cleaner into the intake tract to achieve the cleaning purpose.

4

5

Share

What is the new name of the Prado?

Why Won't My Car Start After Stalling?

How to Open the Engine Hood of a Mercedes-Benz C200?

What does 230kpa tire pressure mean?

What does the triangular exclamation mark on the dashboard mean?

What is the valve clearance for cars?

What are the methods for cleaning carbon deposits in a car by yourself?

Is the new Sagitar fuel-efficient?

What is the weight requirement for fire extinguishers in vehicle inspections?

Is it necessary to change the engine oil when it turns black?

What is the emission standard of Changan CX20?