What is the name of the Trumpchi engine?

Where is the blower relay located in the Elysee?

The blower relay in the Elysee is located below the steering wheel, and the long relay is the blower relay. The blower, also known as a ventilator, is a device that uses rotating impellers. Modern blowers are electric motors that convert electrical energy into air kinetic energy. Here is some extended information about the Elysee: 1. In terms of configuration, the Elysee is equipped with the only and largest MRN-7-inch touchscreen navigation and entertainment system in its class; a hidden rear comfort air system; 4/6 foldable rear seats; and a PM2.5 in-cabin air filtration system. 2. In terms of power, the Elysee is equipped with a new EC5 1.6L CVVT technology engine that integrates multiple advanced technologies, combining excellent power and fuel economy, with a power output of 86KW/6000rpm, the highest in its class. 3. Citroen's master-level chassis technology is also inherited in the new Elysee, offering customers a perfect combination of reliable handling and comfortable driving.

6

5

Share

How long does it take to get the customs clearance document for imported cars?

It takes about 10 working days to get the customs clearance document for imported cars. Here is some relevant information about the customs clearance document for imported cars: 1. From the start of customs declaration to the issuance of the customs clearance document, it takes about 10 working days for imported cars. When purchasing parallel imported cars, make sure to confirm the completeness of relevant vehicle documents such as the customs clearance document, inspection certificate, and conformity certificate before proceeding with the purchase transaction. 2. When purchasing parallel imported cars, it is essential to confirm the completeness of relevant vehicle documents such as the customs clearance document, inspection certificate, and conformity certificate before proceeding with the purchase transaction. Some 4S shops selling China-spec imported cars may mortgage the customs clearance document to banks. 3. The purchase transaction can only proceed after obtaining the customs clearance document or a copy of it by releasing the mortgage. 4. The customs clearance document is issued by customs. The fourth copy of this document is used for export tax rebates. After implementing paperless customs declaration, customs no longer issues this document.

17

1

Share

How to Disassemble the Lavida Wiper?

Here is the method to disassemble the Lavida wiper: 1. Loosen the nut on the wiper arm and remove the wiper arm assembly. 2. Then remove the plastic waterproof grille on the wiper. 3. Use a wrench to unscrew the wiper mounting bolt, and the wiper can be disassembled. Below is some related information about wipers: 1. Before heavy rain, check whether the car wiper can work properly. 2. In heavy rain, fast and large raindrops hit the windshield. Even if the wiper moves quickly, it is difficult to completely remove the raindrops, affecting the driver's vision. To ensure driving safety, stop driving immediately. 3. When light rain starts while driving, do not rush to turn on the wiper. At this time, there is insufficient moisture on the front window, and the wiper will dry wipe, which will only have the opposite effect.

17

5

Share

What is the Difference Between Wheel Alignment and Wheel Balancing?

Wheel alignment and wheel balancing differ in the following aspects: 1. Wheel balancing refers to the process of adding balancing weights to the wheels to achieve a balanced state when they rotate. 2. Wheel alignment is based on the four-wheel parameters of the vehicle, and adjustments are made to ensure good driving performance and certain reliability. Below is more detailed information about wheel alignment and wheel balancing: 1. Wheel Balancing: A car's wheel is an assembly consisting of a tire and a rim. Due to the impossibility of perfectly even mass distribution in all parts, and the fact that tires and rims are not perfectly round, high-speed rotation can cause wobbling or bouncing. Drivers may then experience wheel shaking or steering wheel vibration. To prevent or eliminate this phenomenon, weights are added to the wheel in a dynamic state to correct the balance of the wheel's edges. This correction process is known as wheel balancing. 2. Wheel Alignment: Wheel alignment primarily involves adjusting the toe-in, toe-out, camber angle, and caster angle. For non-independent suspensions, only the parameters of the drive wheels need to be adjusted.

4

1

Share

How to Use Mercedes-Benz Auto Start-Stop?

To turn it on or off, simply press the button. The auto start-stop button in Mercedes-Benz vehicles is located in the functional control area in front of the center armrest, near the handbrake, and it is a mechanical button. Here are some precautions regarding auto start-stop and auto hold: 1. Some models are equipped with both functions: auto start-stop and auto hold, which can save effort and fuel. When using auto start-stop, the driver should turn off the engine. If the vehicle does not have the auto hold function, the driver should keep pressing the brake during the auto start-stop process; releasing it will restart the engine. 2. The principle of auto hold is to help the driver press the brake. During this period, the engine is in a stopped state but not turned off. Pressing the accelerator again will restart the engine. 3. Turning off auto start-stop is not permanent; the owner needs to turn it off every time they drive.

5

1

Share

What Causes the Squeaking Noise When Opening and Closing Car Doors?

Door opening and closing noises mainly originate from wear and tear on the door hinges and limiters. Due to years of use, door hinges and limiters may experience wear or accumulate dust in the gaps, causing vibrations and resulting in noise during operation. Below are some details about car doors: 1. Car doors are connected to the body via hinges, and it's normal for hinges to make noise after prolonged use. To ensure smooth and silent operation of the hinges, it's recommended to apply lubricating oil every 2-3 months for maintenance. 2. Additionally, doors and the body are connected by another component called the door limiter. You can open the door to its maximum angle, clean the grease and dirt from the limiter arm, pivot pin, and connecting bracket surfaces, and then apply an appropriate amount of grease to the upper and lower surfaces of the arm. 3. If the car has been in use for some time, it's advisable to check whether the door seals have aged. Since seals are made of rubber, they can gradually deteriorate and crack over time, leading to noticeable wind noise and friction sounds for passengers. If the seals are aged or damaged, it's recommended to replace them directly. Also, regularly clean the dust and rainwater from the gaps between the seals during daily use to prevent aging.

4

3

Share

What is the name of the Trumpchi engine?

Where is the blower relay located in the Elysee?

How long does it take to get the customs clearance document for imported cars?

How to Disassemble the Lavida Wiper?

What is the Difference Between Wheel Alignment and Wheel Balancing?

How to Use Mercedes-Benz Auto Start-Stop?

What Causes the Squeaking Noise When Opening and Closing Car Doors?

How to Check Tire Pressure Monitoring in Cars?

Is the Haval H6 front-wheel drive or rear-wheel drive?

What is the best tire pressure for SUV cars?

What car has a logo resembling a nail?