What is the name of the Toyota Wildlander voice assistant?

What does it mean for a large truck to stop and then start again when turning right?

The meaning of a large truck stopping and then starting again when turning right is that the truck needs to come to a complete stop before proceeding when making a right turn. Due to the large blind spot on the right side of large trucks, which can easily lead to accidents, regulations require that the truck must stop for 5 seconds before starting to move again. Below is some information about encountering large trucks while driving: 1. Avoiding truck blind spots: Trucks have large blind spots, especially on the right side. During daily driving, it's common to see trucks driving in the middle of the road. Sometimes, slow vehicles in the fast lane may force drivers to overtake from the right side of the truck, which is extremely prone to accidents. 2. The dangers of large trucks turning: When a large truck turns, there is a specific term called 'inner wheel difference,' which refers to the difference between the front and rear wheels on the turning side. If a car driver stays in this area, the truck driver may not see anything there at all. It is crucial to stay away from this zone.

14

2

Share

What is the ground clearance of the Volkswagen Teramont?

The ground clearance of the Volkswagen Teramont is 170mm. Below are the detailed specifications of the Volkswagen Teramont: 1. The Teramont is a large and mid-size SUV under the Volkswagen brand. It is equipped with three powertrain options: a 2.0T engine in both high and low power versions and a 2.5T V6 engine. The 330TSI model features a 2.0T engine with a maximum power of 186 horsepower and a maximum torque of 320 Nm, paired with a 7-speed dual-clutch transmission. The power output of the 330TSI model is sufficient to meet basic daily driving needs. 2. For the interior, the SAIC Volkswagen Teramont comes with a three-spoke flat-bottom steering wheel and a 12.3-inch full LCD instrument panel. 3. In terms of the infotainment system, the new model is equipped with a multimedia information display that supports the App-Connect mobile interface platform, compatible with Apple CarPlay and Android Auto. 4. Regarding features, the new model includes adaptive cruise control, lane keeping assist, blind spot monitoring, collision warning, heated steering wheel, front seat heating/ventilation, and a panoramic sunroof, among others.

16

0

Share

Why Do Large Trucks Always Need to Add Water to Their Radiators?

Large trucks frequently need to add water to their radiators because heavy-duty trucks carry substantial loads, resulting in greater inertia. When braking downhill, the friction between the brake shoes and the brake drums generates significant heat, causing the drums to become extremely hot. Prolonged exposure to high temperatures can lead to carbonization of the brake drums, potentially causing brake failure or tire blowouts. Below are some key points about encountering large trucks on the road: 1. Avoid Truck Blind Spots: Trucks have large blind spots, particularly on the right side. During normal driving, trucks often occupy the center of the lane, and if slower vehicles block the fast lane, drivers may attempt to overtake from the truck's right side, significantly increasing the risk of accidents. 2. Hazards of Truck Turns: When a large truck turns, it exhibits a phenomenon known as 'off-tracking,' where there is a difference in the path of the front and rear wheels on the turning side. If a passenger car lingers in this zone, the truck driver may not see it at all. It is crucial to move away quickly.

2

5

Share

How to Identify Mercedes-Benz Taillights?

The taillights of the Mercedes-Benz S-Class feature three horizontal bars, while those of the C-Class and E-Class have two bars. Below are specific methods to identify Mercedes-Benz models: 1. The LED strips of the headlights can also distinguish Mercedes-Benz models. The C-Class has a single LED strip in the headlights, the E-Class has two, and the S-Class has three. 2. The E-Class is designed to visually appear wider, with a flatter front grille that resembles a large mouth. In contrast, the S-Class reduces this overly wide visual effect with a smaller central grille that connects to the shape of the upper grille, appearing as an extension downward and integrating seamlessly with the headlights and waistline. 3. On the side profile, the E-Class features a continuous waistline running the entire length, while the C-Class has alternating light and dark waistlines, similar to the S-Class, though the S-Class is significantly longer than the C-Class. The upper edge of the E-Class taillights is flat, transitioning into the trunk chrome strip, whereas the C-Class taillights slope downward. Additionally, the E-Class has an extra reflector between the taillights and exhaust pipes. The rear diffuser above the exhaust pipes is flat on the C-Class, while the E-Class has a raised section.

4

0

Share

Why Don't Large Trucks Use Tubeless Tires?

Tubeless tires have poor load-bearing capacity. Large trucks, with their cargo and own weight, often exceed 20 tons, which tubeless tires cannot withstand. In contrast, steel-belted tires can handle varying loads without issues and have a longer lifespan. Steel-belted tires feature a fine steel wire mesh within the tire's rubber fabric layers, along with an inner rubber tube, enhancing the tire's load-bearing capability. Below are some tips for driving near large trucks: 1. Avoid Truck Blind Spots: Trucks have large blind spots, especially on the right side. Often, trucks drive in the middle of the road, and with slow vehicles blocking the fast lane, overtaking from the truck's right side becomes common, significantly increasing the risk of accidents. 2. Hazards of Truck Turns: When a truck turns, there's a specific term called 'inner wheel difference,' referring to the differential between the front and rear wheels on the turning side. If a car stays in this area, the truck driver may not see it at all. It's crucial to move away quickly.

1

5

Share

What is highway ETC?

Highway ETC (Electronic Toll Collection) is the electronic toll collection system, also known as the non-stop toll collection system, where one or more ETC lanes are set up on highways. ETC charging method: Through the dedicated short-range microwave communication between the vehicle-mounted RFID tag installed on the vehicle's windshield and the microwave antenna on the ETC lane at the toll station, the system uses internet technology to conduct background settlement processing with the bank, thereby achieving the purpose of vehicles passing through toll bridges without stopping to pay tolls. Banks install this type of ETC express card with a post-payment system. ETC application conditions are as follows: Provide the original and photocopy of the vehicle owner's valid ID card and vehicle license, and the photocopy of the driver's license must include the page with the most recent annual inspection seal; Postal credit card application form, which is used to bind the ETC card. After obtaining the credit card, swipe it twice and present the POS slip to the designated postal outlet to receive and install the ETC on-board device for free, with no charges during the process; Must be between 18 and 60 years old; Own a vehicle under personal name. Below are precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have a large inclination angle of the windshield, resulting in a smaller driver's field of vision. If this is not considered during ETC installation, it will increase the driver's blind spots. Install it on the right side behind the rearview mirror to avoid obstructing the view. Do not affect charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the black areas on the windshield and do not place it where the solar panel might be blocked. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-removal lever connected to a switch below. After the electronic tag is installed, the windshield will press the anti-removal lever in. If it is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable, requiring a visit to the ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. Precautions for using ETC: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic sensing and paying for the vehicle in front; the ETC lane recognition speed is 20 kilometers per hour. If the speed is too fast, the vehicle device information cannot be read, resulting in failed toll deduction; when using a debit card bound to ETC, insufficient balance will also cause toll deduction failure.

19

5

Share

What is the name of the Toyota Wildlander voice assistant?

What does it mean for a large truck to stop and then start again when turning right?

What is the ground clearance of the Volkswagen Teramont?

Why Do Large Trucks Always Need to Add Water to Their Radiators?

How to Identify Mercedes-Benz Taillights?

Why Don't Large Trucks Use Tubeless Tires?

What is highway ETC?

Can Mainland Cars Drive to Hong Kong?

What is the difference between Audi RS series and S series?

How to Check the Fuel Level on the Audi Q5 Fuel Gauge?

What Causes Uneven Tire Wear on the Front Wheels of a Heavy Truck?