What is the name of the shield on the tire?

1 Answers
LaAustin
07/25/25 11:27am
The shield on the tire is called a mudguard. The installation method for mudguards is as follows: 1. Prepare mudguards that match the car model, pliers, a screwdriver, corresponding screws, and nuts in advance. 2. Remove the screws from the corresponding part of the car body before installation. 3. Place the mudguard in the corresponding position on the vehicle, ensuring the outer edge of the mudguard is parallel to the outer edge of the tire. 4. Some car models may require drilling holes; ensure the screw holes are positioned correctly to avoid affecting the installation. 5. Tighten the mudguard using the provided specialized screws. Mudguards effectively protect the car body by reducing mud splashes during rainy days and minimizing damage to the car paint caused by flying gravel from the road due to tire pressure.
Was this review help?
3
5
Share
More Forum Discussions

How to engage the S gear in the 2019 Bora?

To engage the S gear in the 2019 Bora: Simply push the gear lever directly into the S position while driving, typically used for climbing slopes or quickly overtaking. The S gear is the car's sport mode. In S gear sport mode, the transmission can shift freely, but the shift timing is delayed, keeping the engine at high revs for a longer period. This allows the car to maintain high revs in lower gears for an extended time, resulting in greater torque output and acceleration. The 2019 Bora is a self-designed model under FAW-Volkswagen, with body dimensions of 4663mm in length, 1815mm in width, 1473mm in height, and a wheelbase of 2688mm.
4
1
Share

Do you need to depress the clutch when starting the car?

Starting the car requires depressing the clutch. The main purpose of depressing the clutch is to prevent the car from suddenly lurching forward during startup, which could lead to accidents. Especially when starting the engine on uphill or downhill slopes, it is essential to depress the clutch. Failure to do so might cause the car to roll, potentially resulting in accidents. Additionally, depressing the clutch when starting the engine also protects the engine. Without depressing the clutch, the engine would operate under excessive load, which could cause damage. Therefore, to protect the engine and extend the vehicle's lifespan, it is recommended to depress the clutch when starting. The clutch is located within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission.
3
5
Share

What is the tire specification of the Dongfeng Nissan Tiida?

Dongfeng Nissan Tiida uses two specifications of tires, one is 205/50R17, and the other is 195/60R16. The tire specifications are written on the side of the tire, and different configurations of the same model may have different tire specifications. The Dongfeng Nissan Tiida is a car produced by Dongfeng Nissan Passenger Vehicle Company, with body dimensions of 4250mm in length, 1695mm in width, and 1535mm in height. The engine of the Dongfeng Nissan Tiida adopts technologies such as variable valve timing and double overhead camshafts, with an all-aluminum inline four-cylinder arrangement, giving it extraordinary power performance.
6
4
Share

What documents are required for Subject 3?

For the Subject 3 test, you only need to bring your ID card, and then confirm your identity in the car. Subject 3 includes the road driving skills test and the safety and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skills and safety and civilized driving knowledge test subjects in the motor vehicle test. Here are the precautions for the Subject 3 test: Conduct a check before getting into the car; Adjust after getting into the car; Body movements; Follow the voice prompts; Adjust your mindset. Conduct a check before getting into the car: Before getting into the car, you need to walk around the car for a check. There are two sensors on the test vehicle. When the examinee walks around the car, they need to be detected by the sensors to complete this step. If this step is missed, points will be deducted. Adjust after getting into the car: After getting into the car, first adjust the seat to a suitable angle and position, then fasten the seat belt. This is the most important step. If you don’t fasten the seat belt, you will be directly judged as failing. Then adjust the rearview mirror and the gear before starting the engine. Body movements: During the test, examinees need to perform certain body movements, such as turning their heads to observe. These movements must be done correctly to avoid point deductions due to improper actions. Follow the voice prompts: During the test, you must operate according to the voice prompts, following the steps of the voice prompts one by one. Do not operate in advance, otherwise points will be deducted. Adjust your mindset: During the test, you must adjust your mindset. Many examinees become extremely nervous when hearing the voice prompts and easily forget the next steps. Examinees must be mentally prepared before the test.
2
2
Share

How many generations has the Volkswagen CC had?

As of now, the Volkswagen CC has had a total of three generations. The first generation CC was produced from the 2010 to 2012 model years; the second generation CC from the 2013 to 2018 model years, and the third generation CC starting from the 2019 model year. The Volkswagen CC is a mid-size sedan produced by FAW-Volkswagen, with a focus on sporty styling. Taking the 2019 CC as an example: the body dimensions are 4864mm in length, 1870mm in width, and 1447mm in height. In terms of power, the entire lineup is equipped with a 2.0-liter turbocharged engine, available in low and high power versions, both paired with a 7-speed dual-clutch transmission.
19
5
Share

How to Adjust the Time on Honda Civic?

Honda Civic time adjustment method: 1. Press and hold the CLOCK button until the clock flashes, then you can adjust the time; 2. Press the H button to adjust the hour; 3. Press the M button to adjust the minutes; 4. After setting the time, press the CLOCK button again to complete the adjustment. The Honda Civic has launched various models to cater to the tastes of consumers in different countries, including three-door hatchbacks, hardtop coupes, hybrid versions, and five-door sedan versions. The body dimensions of the Honda Civic are 4649mm in length, 1800mm in width, and 1416mm in height, with a wheelbase of 2700mm. The front suspension system of this car uses a MacPherson independent suspension, and the rear suspension system uses a multi-link independent suspension.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.