What is the name of the Nissan Patrol off-road vehicle?

Does a car need to undergo inspection when it reaches six years?

A car that has just reached six years needs to undergo an annual inspection. The exemption from inspection within six years refers to non-commercial passenger cars and other small and mini passenger vehicles (excluding vans and vehicles with seven or more seats), which are exempt from on-site inspection within six years. For new cars within six years, the annual inspection compliance label must be collected from the vehicle management office every two years. Upon reaching the sixth year, the vehicle must undergo on-site inspection. The items for vehicle annual inspection include: 1. Inspection of the vehicle's exterior; 2. Inspection of brakes, lights, and horn; 3. Inspection of exhaust emissions. Vehicle annual inspections can promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents. Precautions for the six-year vehicle inspection: 1. After submitting the inspection application, proceed with the on-site inspection. Drive the vehicle into the automatic inspection area to sequentially check whether the exhaust emissions, speed, lights, side slip, and chassis meet the standards. All items must pass to be approved. 2. Verify the accuracy of the vehicle's license plate, type, body color, engine number, VIN code, and frame number; inspect details such as the bumper, engine compartment, rearview mirrors, lower mirrors, window glass, paint, engine operation status, and the interior and wheels of passenger vehicles. 3. The owner can obtain the inspection report and application form from the inspector. If all inspection items pass, the owner can proceed to pay the inspection fee and collect the vehicle license and compliance label. If any items fail, the owner must repair the vehicle and participate in a re-inspection until it passes before proceeding with the visa procedures.

15

2

Share

What is the normal tire pressure for a sedan in summer?

In summer, the normal tire pressure for a sedan should be maintained at 2.2 bar or 2.3 bar. Tires are the only components of a car that come into contact with the ground, and they are crucial for driving stability and safety. Tire pressure is also very important for tires; it should neither be too high nor too low. If the tire pressure is too high, it will reduce the contact area between the tire and the ground, thereby decreasing grip and handling stability. If the tire pressure is too low, wave deformation may occur during high-speed driving, increasing the risk of a tire blowout. Generally, the car manufacturer's recommended tire pressure can be found on the B-pillar or fuel tank cap of the vehicle. Owners can refer to this recommended tire pressure.

6

3

Share

Does installing a front splitter on a car require registration?

Installing a front splitter on a car requires registration. Modifying the front splitter at the front bumper involves altering the vehicle's dimensions, necessitating registration with the vehicle management office or the traffic management department of the public security authority. Registration process: Step 1: Before modifying the car, the vehicle owner must fill out the Motor Vehicle Modification Registration Application Form and submit it to the local vehicle management office along with copies of the ID cards of the owner and the agent, the vehicle registration certificate, the vehicle license, and other required documents. Step 2: Within three days of receiving the application, the vehicle management office will inspect and archive the vehicle documents, verify the vehicle, and issue license plates, a vehicle license, and an inspection certificate. Only after approval can the modification proceed. Step 3: After the modification, the vehicle owner must return to the vehicle management office to update the modification details. If the modification alters the vehicle's appearance, new photos must be taken, and a new vehicle license must be printed. Legal modification scope for vehicles: Tire style: As long as the tire size and specifications match those on the registration certificate, the tire style can be changed. Installing roof racks and side steps: The height of the roof rack must not exceed 300mm, and the width of the side steps must not extend more than 5cm beyond the vehicle's side profile. Vehicle color: Changing the vehicle color through painting or wrapping must be registered with the vehicle management office within ten days. Note that colors resembling those of police cars, fire trucks, etc., are prohibited. Grille and front/rear bumpers: Installing new grilles and bumpers must not alter the original vehicle length and width, and the vehicle emblem cannot be changed. Bumpers must not have obvious protrusions.

5

1

Share

How to Solve the Strong Odor in a New Car?

Solutions for strong odor in a new car: 1. Ventilate the car, especially by airing it under the sun. If conditions permit, open all four doors to disperse the smell; 2. Use fruit peels like peeled pomelo or orange peels; 3. Place some vinegar in a narrow-necked bottle; 4. Purchase activated carbon bags or air purifiers. However, activated carbon bags need to be sun-dried every few months to release absorbed odors, and the air purifier filter should be replaced promptly. Carpets, interior rugs, and ceiling felts used in the car have a high emission of harmful substances. Most of these materials are bonded with phenolic resin glue, which uses formaldehyde as a raw material. During use, it continuously releases unreacted free formaldehyde into the air, resulting in a long release cycle and significant potential hazards.

17

1

Share

How to spray windshield washer fluid on BMW X6?

To spray windshield washer fluid on BMW X6: Simply pull the control lever towards yourself to activate the washer spray. The windshield washer switch is generally located on the right side of the steering wheel, integrated into the wiper control lever. Note that if no fluid sprays when operating the lever, do not repeatedly pull it - this may indicate the washer fluid reservoir is empty. In this case, check and refill the washer fluid before operating again. The BMW X6 has body dimensions of 4947mm in length, 2004mm in width, and 1698mm in height, with a wheelbase of 2975mm. The BMW X6 features front-engine four-wheel drive with an on-demand AWD system, front double-wishbone independent suspension, and rear multi-link independent suspension.

9

5

Share

Where is the cabin air filter located in a Lexus?

Lexus cabin air filters are located on the left side of the engine compartment, covered by a decorative panel on top of the housing. After releasing the fasteners on the decorative panel, you can access the air filter housing. The air filter housing is secured with clips and can be opened by hand. The cabin air filter ensures clean air in the passenger compartment without bacterial growth; effectively separates solid impurities such as dust, powder, and abrasive particles from the air; and effectively blocks pollen to prevent allergic reactions that could affect driving safety. The Lexus ES has body dimensions of 4975mm in length, 1866mm in width, and 1447mm in height, with a wheelbase of 2870mm. The Lexus ES features front-wheel drive, with a front suspension type of MacPherson strut with stabilizer bar and a rear suspension type of multi-link independent suspension.

13

2

Share

What is the name of the Nissan Patrol off-road vehicle?

Does a car need to undergo inspection when it reaches six years?

What is the normal tire pressure for a sedan in summer?

Does installing a front splitter on a car require registration?

How to Solve the Strong Odor in a New Car?

How to spray windshield washer fluid on BMW X6?

Where is the cabin air filter located in a Lexus?

What is the appropriate tire pressure for the Lavida?

What are the buttons on the GL8 center console?

How to Start a Cadillac When the Key Fob Battery Dies?

How Long Should You Wait to Open the Radiator Cap When the Car Overheats?