What is the name of the gray color for Mercedes-Benz?

How to use the air conditioning in Passat Lingyu 1.8T?

The method to use the air conditioning in Passat Lingyu 1.8T is: 1. Wait until the engine coolant temperature reaches around 90 degrees Celsius after starting the engine; 2. Press the air volume increase button to boost the airflow; 3. Press the blue cooling button when refrigeration is needed. The Passat Lingyu is a mid-size 4-door 5-seater sedan with body dimensions of 4789mm in length, 1765mm in width, 1470mm in height, and a wheelbase of 2803mm. It is equipped with a 1.8T engine and a 5-speed manual transmission, delivering a maximum power of 120 kW and a maximum torque of 220 Nm. The drivetrain is front-engine, front-wheel drive, with a multi-link independent front suspension and a compound torsion beam non-independent rear suspension.

11

4

Share

Can the Brake Pedal Be Adjusted If It's Too High?

Brake pedal height can be adjusted. The method is as follows: 1. Open the engine hood and locate the throttle cable wire on the side of the engine. Pull it outward until reaching the highest point, then fully depress the accelerator pedal. 2. Remove the clip at the end of the cable, move the protective sleeve in the tightening direction, and secure it. This will raise the brake pedal; conversely, moving it in the opposite direction will lower it. Precautions for using the brake pedal include: 1. During emergency braking, hold the steering wheel with both hands—do not operate it with one hand. 2. The free travel of the brake pedal directly affects braking time and stopping distance. 3. Braking actions should be swift. If the vehicle skids, release the brake pedal, but quickly counter-steer the wheel.

3

4

Share

What level of sedan is the Cadillac CTS?

Cadillac CTS is a mid-size luxury sedan with the following dimensions: length 4828mm, width 1795mm, height 1441mm, wheelbase 2880mm, fuel tank capacity 66L. It features rear-wheel drive with front-mounted engine, using unequal-length control arms for the front suspension and multi-link independent suspension for the rear. The Cadillac CTS is equipped with a 2.8L naturally aspirated engine paired with a 5-speed automatic transmission, delivering maximum power of 156kW at 6500rpm and maximum torque of 263Nm at 3300rpm.

15

0

Share

How to Clear the Maintenance Reminder on the Touran Dashboard?

The method to clear the maintenance reminder on the Touran dashboard is: 1. Turn off the ignition switch; 2. Press and hold the reset button with your left hand; 3. Turn on the ignition switch with your right hand; 4. Release the reset button; 5. Press the minute adjustment button on the clock, and the display will return to the normal state. The Touran is a 5-door, 7-seat MPV with body dimensions of 4527mm in length, 1829mm in width, and 1659mm in height, with a wheelbase of 2791mm. The Touran is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 10 kW and a maximum torque of 250 Nm. It features front-wheel drive, with a MacPherson independent suspension at the front and a four-link independent suspension at the rear.

9

5

Share

Where are the accelerator, clutch, and brake pedals in a car?

Manual transmission vehicles have three pedals, arranged from left to right as follows: clutch pedal, brake pedal, and accelerator pedal. In a manual transmission car, the driver uses their left foot to operate the clutch and their right foot to control the brake and accelerator. When starting the vehicle, first start the engine. Press the clutch pedal all the way down with your left foot, shift into first gear, release the handbrake, and then slowly release the clutch to the half-clutch position. If the tachometer fluctuates slightly or the vehicle shows signs of moving, gently press the accelerator with your right foot while continuing to steadily release the clutch with your left foot. Once the vehicle starts moving, quickly lift your left foot off the clutch. While driving, do not rest your left foot on the brake pedal. In manual transmission vehicles, the left foot should only be used to press the clutch pedal when shifting gears. During normal driving, the left foot should not rest on any pedal. Both the brake and accelerator are controlled solely by the right foot. There are two main reasons why the left foot should not rest on the pedals: 1. During long drives, both feet can become fatigued, leading to unintentional pressing. If the left foot is on the brake pedal, accidentally pressing it could easily cause an accident. 2. Most people are right-handed, meaning their right foot reacts faster. In an emergency, the right foot can quickly lift off the accelerator and press the brake. If the left foot is on the brake pedal, the right foot would be suspended, increasing the risk of both feet pressing down simultaneously, which is dangerous. Additional information about car brakes and accelerators: The brake is a mechanical device that slows down the vehicle, also known as a decelerator. The brake pedal is located below the steering wheel. Pressing it activates the brake linkage, which presses the brake pads against the brake disc, slowing or stopping the vehicle. The accelerator controls the fuel supply in an internal combustion engine. In cars, it is typically operated by a pedal, also called the throttle, which regulates the engine's fuel intake. When pressing the brake or accelerator, the body needs support to maintain balance. While the right foot operates the pedals, the left foot stabilizes the body on the floor. If both feet are on the pedals, they are semi-suspended, lacking a stable base, which can lead to unstable braking or acceleration. Tips for new drivers: 1. Use turn signals early when changing lanes or turning: Lights and horns are the language of driving. Always signal your intentions early, especially as a beginner. Avoid the bad habit of turning or changing lanes immediately after signaling. Early signaling can prevent many accidents. 2. Follow proper overtaking procedures: When overtaking, signal early with the left turn indicator, use high and low beams or honk. On roads with no centerline or only one lane, the front vehicle should slow down and move right to allow overtaking when safe. The overtaking vehicle should pass on the left, maintain a safe distance, signal right, and return to the original lane. 3. Check surroundings before reversing: Always inspect the area around the vehicle before reversing. Do not rely solely on mirrors, parking sensors, or cameras. If someone is guiding you, they should stand beside the vehicle, not behind it, to avoid being hit. 4. Slow down and observe at intersections: Intersections are complex with vehicles, pedestrians, and cyclists from all directions. Regardless of traffic lights, always look around and slow down to check for cross-traffic before proceeding. 5. Check for tailgaters before braking hard: During emergency braking, check for vehicles behind you. Maintain a safe distance to avoid rear-end collisions. 6. Keep a safe distance from the vehicle ahead: Road conditions can change suddenly. Control your speed and avoid speeding. Maintain enough distance to react to sudden stops or lane changes by other vehicles. 7. Slow down and check surroundings when turning: Reduce speed when turning and use mirrors to check for pedestrians or cyclists. Yield to them to avoid collisions. 8. Drive in the middle lane when possible: On roads without a central divider, the middle lane provides more time to react to oncoming traffic. On divided roads, it allows time to respond if someone or a vehicle suddenly emerges from the divider. At night, it helps avoid being blinded by opposing headlights. 9. Slow down and honk in poor visibility: In low-visibility conditions or bad weather, honk and reduce speed to ensure safe passage. 10. Slow down near parked large vehicles: Large vehicles can block your view. Be cautious of pedestrians or vehicles that might suddenly appear from behind them. Slow down and proceed only when safe.

20

0

Share

How to open the fuel tank cap of Lexus UX?

To open the fuel tank cap of the Lexus UX: Press the fuel tank cap switch inside the vehicle. The Lexus UX is a compact 5-door, 5-seat SUV with body dimensions of 4495mm in length, 1840mm in width, and 1540mm in height, with a wheelbase of 2640mm. It is equipped with a 2.0L naturally aspirated engine and a CVT continuously variable transmission, delivering a maximum power of 127 kW and a maximum torque of 207 Nm. The drivetrain is front-engine, front-wheel drive, with a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear.

13

2

Share

What is the name of the gray color for Mercedes-Benz?

How to use the air conditioning in Passat Lingyu 1.8T?

Can the Brake Pedal Be Adjusted If It's Too High?

What level of sedan is the Cadillac CTS?

How to Clear the Maintenance Reminder on the Touran Dashboard?

Where are the accelerator, clutch, and brake pedals in a car?

How to open the fuel tank cap of Lexus UX?

What car is represented by a leopard?

Why does a car stall shortly after starting?

Can a Dash Cam Record When the Car is Not Running?

How to Adjust the Seat Height of Civic?