What is the name of the car with the DS logo?

1 Answers
VonEliana
07/28/25 6:19pm
DS (Luxury Car Brand): A luxury car brand under the Peugeot Citroën Group. Below is relevant information about DS cars: 1. Product Technology Hydropneumatic Suspension System DS was the first car to use a hydropneumatic suspension system. Before this, people used springs to design shock absorption solutions for cars. This led to a dilemma where a car's sportiness and comfort could not be balanced. With this groundbreaking technology, DS provided a feasible solution to this problem. 2. Company Introduction: The PSA Group [65] has a history of over 200 years and is one of the world's earliest automobile companies. Meanwhile, the Changan Automobile Group is one of the Chinese automobile companies with the strongest R&D capabilities. As a product of their strong collaboration, in 2011, Changan Peugeot Citroën Automobile Co., Ltd. was established. It built its own production base, R&D center, and independent sales channels in China for the development of domestically produced DS models.
Was this review help?
16
2
Share
More Forum Discussions

What does the AC switch on a car air conditioner represent?

The AC switch on a car air conditioner refers to the air conditioning cooling switch, where AC is the abbreviation for Aircondition. Below is an introduction to the car air conditioning system: 1. How to use the AC button: When the weather is hot and cooling is needed, start the car and press the AC button to blow cold air. 2. Introduction: The car air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the cabin. It provides a comfortable environment for passengers, reduces driver fatigue, and improves driving safety. 3. Function: The air conditioner can control the temperature inside the cabin, both heating and cooling the air to maintain a comfortable level.
17
4
Share

How often should the spark plugs be cleaned and replaced on a 10th-generation Civic?

For the 10th-generation Civic, spark plugs should be replaced every 40,000 to 60,000 kilometers. The spark plug is a crucial component of the gasoline engine's ignition system. It introduces high-voltage electricity into the combustion chamber, causing it to jump across the electrode gap and generate a spark, thereby igniting the combustible air-fuel mixture in the cylinder. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, and remove the high-voltage distributor wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage distributor wires according to the firing order, and then secure the cover.
4
1
Share

What does ESC in cars mean?

ESC in cars stands for Electronic Stability Control. The ESC button is the switch for the Electronic Stability Control system. When ESC is enabled, pressing and holding the ESC button can deactivate the Electronic Stability Control system. Below is some information about car ESC: 1. In the automotive field, ESC is also referred to as the Driving Safety Supplement System. It is an active safety device in vehicle configurations, an abbreviation for Electronic Stability Controller. 2. ESC is an extension of the functions of the Anti-lock Braking System (ABS) and Traction Control System (TCS). On top of the original systems, it adds a yaw rate sensor, lateral acceleration sensor, and steering wheel angle sensor when the vehicle is steering. Through the ECU (Electronic Control Unit), it controls the driving and braking forces of the front, rear, left, and right wheels to ensure the lateral stability of the vehicle during driving.
7
0
Share

How to Bleed the Brake System?

Brake bleeding methods are as follows: 1. Remove the dust cap on the bleeder valve of the wheel cylinder, prepare a transparent hose, connect one end to the bleeder valve and the other end to a plastic container. 2. One person should press the brake pedal several times inside the car, then firmly press and hold the brake pedal. Meanwhile, another person outside the car should loosen the bleeder screw on the wheel cylinder, allowing air to escape along with the brake fluid. 3. Repeat the above steps until no air bubbles are visible in the discharged fluid, then top up the brake fluid and tighten the bleeder screw. Note: The recommended wheel sequence for bleeding is usually right rear wheel – left rear wheel – right front wheel – left front wheel.
19
5
Share

How to Replace the Battery in a Focus Car Key?

The method for replacing the battery in a Focus car key is as follows: 1. Open the button on the remote key to pop out the stainless steel key. 2. Place the side of the key with the icon facing up. Hold the two ends of the key with your left index finger and thumb, aligning them in a straight line with the pattern. In other words, the index finger pattern and the thumb pressure point should form a straight line. Simultaneously, place your right thumb on the right side of the key fob, aligning it symmetrically with the left pattern point along the central arc. Bend your right index finger opposite the right thumb. 3. Hold both sides of the key with your left hand while pressing down firmly with your right thumb to widen the central arc-shaped gap. At the same time, pull both hands outward. As the gap further increases, apply downward force on the right half of the key, which will further widen the gap until the key splits into two parts. The half with the pattern will not separate further. 4. Use force to pry open the non-patterned half from the central gap, then use a small knife to remove the circular battery and replace it with a new one.
10
5
Share

Can you directly add coolant if it's low?

If the coolant level is too low, you can directly add the same brand and specification. Coolants of different brands cannot be mixed. Here are the precautions for adding coolant: 1. Try to use the same brand of coolant. Different brands of coolant use different metal corrosion inhibitors, so they cannot be mixed. 2. Most coolants have a validity period of two years (some products may last longer). When adding, make sure the product is within its validity period. When replacing, drain the old coolant, clean the cooling system thoroughly, and then add the new coolant. 3. Avoid diluting with water. Traditional inorganic coolants should not be diluted with water, as this can cause precipitation and severely affect the normal function of the coolant.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.