What is the name of the car with a tiger head logo?

What are the consequences of not replacing the motorcycle air filter?

The consequences of not replacing the motorcycle air filter are: 1. The intake negative pressure of the carburetor will change, leading to excessive fuel intake and a richer air-fuel mixture; 2. The air filtered by the air filter will be unclean. Since the engine contains many precision components, impurities can damage these parts. Additionally, air purity affects the air-fuel mixture ratio, impacting vehicle performance; 3. The engine will experience severe power loss, difficulty in accelerating, and increased fuel consumption. Motorcycle air filters come in two types: dry and wet. The dry paper filter cannot be cleaned and must be replaced if excessively dirty or dusty. The wet foam sponge filter can be cleaned using non-flammable detergents, but avoid using gasoline-based liquids as they may cause the filter to expand and lose its filtering effectiveness.

9

5

Share

What Components Are Included in a Transmission Assembly?

Transmission assembly includes the entire transmission case and the fluids inside, but does not include the drive shaft. The transmission assembly is essentially the transmission itself. 1. Transmission: The transmission primarily refers to the vehicle's gearbox, which is categorized into manual and automatic types. A manual transmission mainly consists of gears and shafts, achieving speed and torque variation through different gear combinations. An automatic transmission (AT), on the other hand, is composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system, achieving speed and torque variation via hydraulic transmission and gear combinations. 2. Function: The transmission is a crucial component in a vehicle, capable of altering the transmission ratio and expanding the torque and speed effects on the drive wheels. With advancements in modern technology, transmissions have undergone upgrades, evolving from the initial manual transmissions to today's continuously variable transmissions (CVTs), and from non-synchronized to synchronized systems, making operation increasingly convenient.

1

0

Share

What to Do When the Truck Handbrake Won't Release?

Truck handbrake won't release, which can be analyzed in two scenarios. The first is due to incorrect operation preventing release, and the second is a malfunction in the vehicle itself. The details are as follows: 1. Truck Handbrake: The handbrake of a truck differs from that of a regular car. For some truck models, the handbrake requires pulling outward, then turning the handle on the handbrake clockwise to keep it in a parallel state before it can be released. Due to differences in models and brands, handbrakes may vary. For specific operation methods, it is recommended to refer to the vehicle's user manual, which provides detailed explanations. 2. Brake Wheel Cylinder: Another possibility is that the truck's handbrake itself is faulty. The most common cause is an issue with the brake wheel cylinder. The principle of truck braking generally involves the master cylinder generating thrust when the brake is pressed, forcing hydraulic oil into the brake wheel cylinder. The piston inside the brake wheel cylinder moves under hydraulic pressure, pushing the brake pads to stop the vehicle.

15

1

Share

How to reset the MINI brake pad warning light?

Insert the remote key (do not press the brake pedal), then press the start/stop-engine button once to illuminate all dashboard lights. Hold the reset button located at the top left of the instrument cluster for approximately 8 seconds. Here are some tips for replacing brake pads: 1. Engage the parking brake: Tighten the parking brake, loosen the hub nuts of the wheel requiring brake replacement (note: only loosen, do not completely remove). Jack up the car properly using a jack, then remove the tire. Before working on the brakes, it's recommended to spray the brake system with dedicated brake cleaner to prevent dust inhalation, which may affect health. 2. Push to innermost position: Use a C-clamp to push the brake piston back to its innermost position. (Note: Before this step, open the hood and unscrew the brake fluid reservoir cap, as the brake fluid level will rise when compressing the piston). Install the new brake pads.

4

1

Share

What does the fuel pump recall for the 10th-generation Civic mean?

Fuel pump recall refers to the process where the manufacturer of defective automotive products must eliminate product defects in accordance with legal requirements and procedures due to identified faults in the fuel pump. Fuel pump malfunctions can lead to poor performance of the fuel pump, and in extreme cases, may cause the engine to stall while driving, posing safety hazards. Specific details are as follows: 1. System: The automotive recall system (recall) is a process where, upon discovery that vehicles released to the market have defects due to design or manufacturing issues that do not comply with relevant regulations and standards and may lead to safety and environmental problems, the manufacturer must promptly report the product issues, causes, and improvement measures to national authorities, apply for a recall, and, upon approval, modify the affected vehicles to eliminate potential hazards. 2. System Countries: Manufacturers are also obligated to keep users informed in a timely manner, which is significant for protecting consumers' legitimate rights and interests. Currently, countries implementing the automotive recall system include the United States, Japan, Canada, the United Kingdom, and Australia.

20

5

Share

Is 7L/100km Fuel Consumption Considered High?

It is relatively normal and not considered high. A fuel consumption of 7L/100km means the car consumes 7 liters of gasoline per 100 kilometers. Related explanations are as follows: 1. Constant-speed fuel consumption: Constant-speed fuel consumption refers to the fuel economy indicator when a car is driving at a constant speed on a good road surface. Since constant-speed driving is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted. The fuel consumption per 100 kilometers indicated in the manuals of domestic cars is generally constant-speed fuel consumption. 2. Difference: However, since cars often experience various working conditions such as acceleration, deceleration, braking, and engine idling during actual driving, constant-speed fuel consumption tends to be lower and differs significantly from actual fuel consumption. Especially for cars frequently used for short-distance driving in urban areas, the difference is even greater.

2

1

Share

What is the name of the car with a tiger head logo?

What are the consequences of not replacing the motorcycle air filter?

What Components Are Included in a Transmission Assembly?

What to Do When the Truck Handbrake Won't Release?

How to reset the MINI brake pad warning light?

What does the fuel pump recall for the 10th-generation Civic mean?

Is 7L/100km Fuel Consumption Considered High?

How to Activate the Auto Window Roll-Up Feature When Locking the Car?

How to Fix Diesel Contamination in Engine Oil?

What does a sun with an exclamation mark mean?

What is the Motor Vehicle QR Code?