What is the name of NIO's intelligent system?

2 Answers
VanIvan
07/28/25 10:31pm
NIO's intelligent system is called NOMI-Mate. NIO is a global intelligent electric vehicle brand, established in November 2014. Its main products include NIO ES6, NIO ES8, NIO EC6, NIO EVE, NIO EP9, and others. Below is an introduction to NIO: 1. Brand Introduction: NIO is a globally-oriented startup brand that has established research and development, design, production, and business institutions in 13 locations including San Jose, Munich, London, and Hefei. It has gathered thousands of top-tier talents in the automotive, software, and user experience industries and has initially built a nationwide user service system in the Chinese market. 2. Vision: NIO is committed to creating a joyful lifestyle for users by providing high-performance intelligent electric vehicles and an ultimate user experience.
Was this review help?
8
0
Share
LaCorbin
08/12/25 3:01am
I've previously learned about NIO's intelligent system called NOMI, which sounds pretty cool, right? As someone who has driven quite a few electric cars, I think NOMI is more than just a name—it's a physical AI assistant, mounted on the center console like a cute little robot head. It can control many things via voice commands, such as turning up the air conditioning temperature, navigating to the nearest charging station, or playing a song, with accurate and fast recognition. Behind the scenes, it uses multimodal interaction technology, combining cameras and sensors, and can even express emotions—like smiling and greeting you while driving, making it feel more personable. This design elevates the driving experience, not just in terms of practicality but also by adding a touch of humanized care. When chatting about cars with friends, I always mention how NOMI simplifies operations, since voice control is much safer than manual buttons. I recommend that anyone interested take it for a test drive to experience it firsthand—it’s full of surprises.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

How to Replace the Spark Plugs in a Verna?

Steps to replace the spark plugs in a Verna: Open the hood, lift the plastic cover of the engine, remove the high-voltage wires, and mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any leaves, dust, or debris on the outside and make sure to clean them thoroughly. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the high-voltage wires according to the firing order, and then secure the cover. Spark plug replacement interval: Under normal maintenance conditions, spark plugs should be replaced every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is recommended to follow the user manual. You can refer to the following standards for maintenance and replacement: Platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers.
10
3
Share

How to Deal with a Tire Blowout on the Highway?

In case of a tire blowout on the highway, firmly grip the steering wheel, wait for the vehicle to stabilize, then brake gently and move away from the main lane. Here are emergency measures to handle a high-speed tire blowout: 1. Never slam on the brakes: If a front tire blows out, hold the steering wheel tightly, adjust the car's direction, and avoid panicking by jerking the steering wheel repeatedly, which could cause severe skidding or even a spin. Gradually reduce speed by shifting to neutral or downshifting step by step, release the accelerator pedal, and gently press the brake pedal repeatedly to bring the car to a slow stop by the roadside. 2. Avoid sudden steering: If a rear tire blows out, the car's rear end may sway. Stay calm, grip the steering wheel with both hands, and usually, the car can be kept moving straight. Additionally, it's best to press the brake pedal repeatedly in a pumping motion. This shifts the car's weight forward, putting more pressure on the intact front tires and reducing the load on the blown-out rear tire.
7
0
Share

Where is the rear wiper switch on the Jeep Compass?

The rear wiper switch on the Jeep Compass is located on the right-hand stalk of the steering wheel. Here are some precautions for using the wipers: 1. Maintain cleanliness: When there are streak marks on the glass surface, the wiper blade may be dirty. You can sprinkle alcohol on a towel and wipe the surface of the wiper blade. Cleaning it once a month can improve the wiper's performance. 2. Check the rubber: If the wiper makes unusual noises while operating, the rubber blade may be aging or cracked. If the wear is not severe, you can use sandpaper to smooth out rough spots on the surface. 3. Avoid sunlight: Park the car in a shaded area, such as a garage, where it is not exposed to direct sunlight. Summer is particularly harsh on vehicles. Wiper blades are rubber products, and sunlight will only accelerate their aging. 4. Refill fluid: Adding plain water directly to the windshield washer reservoir is not conducive to the maintenance of the windshield and wiper blades in the long run. To ensure the longevity of the components, always use proper windshield washer fluid. Refill the washer fluid promptly to be prepared for unexpected needs.
1
2
Share

Why Can't LNG Natural Gas Vehicles Accelerate Properly?

Here are the reasons why LNG natural gas vehicles cannot accelerate properly: 1. Pressure Gauge Issues: Check if the pressure is normal. If there is a problem with the pressure, inspect all pipelines for gas leaks. 2. Fuel Injector Issues: Inspect the vehicle's fuel injectors. If an LNG natural gas vehicle does not run smoothly, the fuel injectors may accumulate carbon deposits and age rapidly. Below are additional solutions for LNG natural gas vehicles that cannot accelerate properly: 1. Fuel Level: If the fuel in the vehicle's gas tank is critically low, check the dashboard for the remaining fuel level and refuel promptly if it is too low. 2. Fuel Quality: Poor fuel quality, such as gas with low calorific value, can lead to insufficient power and torque, resulting in weak acceleration. Replace it with gas of higher calorific value. 3. Gas and Liquid Outlet Valves: If the gas and liquid outlet valves on the gas tank are not fully opened, the fuel supply may be insufficient, causing weak acceleration. Fully open the valves to resolve the issue. 4. Air Filter and Fuel Injector: Check if the air filter and fuel injector are clogged. Clean and replace the air filter and fuel injector regularly.
5
5
Share

What is the spark plug gap?

The spark plug gap ranges between 0.6mm and 3mm. Here is relevant information about spark plug oil leakage: 1. Consequences: Spark plug oil leakage can cause various abnormalities in the vehicle, such as increased fuel consumption (iridium spark plugs save over 10% fuel), loss of acceleration power, and engine vibration. Spark plug oil leakage is usually caused by issues with piston rings, valve stem seals, or fuel injectors. Regardless of the cause, the spark plugs should be replaced. 2. Causes: Spark plug oil leakage may result from damaged fuel injectors, valve cover gasket leakage allowing oil to reach the spark plugs, or problems with piston rings and valve stem seals. The specific cause should be diagnosed at a professional repair shop. Spark plug oil leakage can lead to increased vehicle fuel consumption (extreme combustion iridium spark plugs save over 10% fuel), poor acceleration, and failed emissions tests. It is recommended that owners regularly inspect and replace spark plugs as needed. 3. Spark plug principle: The spark plug is a crucial component of a gasoline engine's ignition system. It introduces high voltage into the combustion chamber and causes it to jump the electrode gap to create a spark, thereby igniting the combustible mixture in the cylinder. It mainly consists of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell, with the side electrode welded to the shell.
12
4
Share

What is the tire pressure for the Q5?

Q5's normal tire pressure range is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. The tire pressure monitoring system in the Audi Q5 is not a real-time monitoring function. If there is an abnormality in the tire, information will automatically be displayed on the dashboard. The display does not show specific values but only indicates which tire has a problem. If the tire pressure monitoring indicator light comes on (a yellow symbol, an irregular circle with no stamp on top and four small spikes below, containing an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: The system will usually alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, the tire needs to be checked and the pressure adjusted. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator to light up. In this case, simply reset the tire pressure. Damaged tire pressure sensor: The tire pressure sensor, which is used to monitor tire pressure, is directly installed inside the tire and connected to the tire inflation port. If the sensor is damaged while driving, the tire pressure warning light will also come on. For sensor damage issues, the only solution is to replace it with a new part.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.