What is the motor power of the WM EX5?

1 Answers
MacJessica
07/29/25 7:22pm
WM EX5 is equipped with a motor that has a maximum output power of 160 kW, and the battery type is a ternary lithium battery. Below is an introduction to the WM EX5: Appearance: The 2019 WM EX5 has a length, width, and height of 4585mm, 1835mm, and 1672mm respectively, with a wheelbase of 2703mm. In terms of body size, it is a compact SUV, with a trunk volume of 488L, providing ample space for use. The exterior design of the 2019 WM EX5 leans more towards younger audiences, appearing very simple, neat, and highly fashionable. The front face of the 2019 WM EX5 features relatively sharp lines, creating a rich sense of layering and a strong sporty feel. From the side, the body is quite compact, utilizing a fastback design with a well-proportioned width-to-height ratio. Performance: The 2019 WM EX5 uses a single-motor drive mode, paired with a fixed gear ratio transmission, delivering a maximum torque of 315 N·m and a 0-100 km/h acceleration time of 8.5 seconds. The 2019 WM EX5 offers three optional driving ranges: 400 km, 460 km, and 520 km, with fast charging times of 0.5 hours, 0.5 hours, and 0.58 hours respectively.
Was this review help?
13
3
Share
More Forum Discussions

What are the differences between buying a car with a loan and paying in full?

The differences between buying a car with a loan and paying in full are as follows: 1. Different fees: When manufacturers do not offer zero-interest financial policies, consumers need to bear two additional costs: loan interest and handling fees (commonly existing); there is no handling fee when paying in full during the car purchase process. 2. Different purchase times: Buying a car with a loan allows many people who are confident in their future income to consume in advance and purchase a car, which can significantly increase car sales; many people cannot afford to pay a large amount of money at once to buy a car and need some time to save. 3. Different payment items: Paying in full for a car does not require a mortgage, but you must pay: purchase tax, license plate fee, compulsory insurance, vehicle and vessel tax, and insurance is voluntary for the car owner.
13
2
Share

What are the maintenance items for a Mercedes-Benz at 30,000 kilometers?

Mercedes-Benz vehicles have a clearly defined regular maintenance schedule by the manufacturer. The maintenance interval is set at every 10,000 kilometers, alternating between Service A and Service B. At the 30,000-kilometer mark, Service A is performed. Below are the items included in Mercedes-Benz Service A: 1. Replacement: Replace the fuel filter, cabin air filter (pollen filter), and engine air filter. 2. Clutch inspection: Check the clutch pedal travel, the clearance and fixation of the lower control arm ball joints, and the condition of the dust boots. 3. Tire inspection: Check the tread depth, tire pressure, and wear patterns; perform a wheel alignment if necessary. 4. Throttle body and idle speed control valve inspection: Clean if excessively dirty. 5. Spark plug inspection: Replace if necessary, and perform a fuel injector cleaning without disassembly.
13
5
Share

How to Identify if a Car Has Been in a Fire?

Techniques for identifying a fire-damaged car: 1. Visual Inspection: Check the exterior of the car, including the doors and front/rear fenders, for uneven paint surfaces or irregularities. Examine whether the paint on the car's surface is smooth and uniform, and check if there is any paint on the rubber seals. 2. Smell Test: Enter the car and check for any pungent or burnt odors, or an overpowering perfume scent. If the car has been in a fire, there will likely be residual burnt smells, and some owners may spray excessive perfume to mask it. 3. Interior Check: Inspect the interior, including the flooring, for signs of fire damage, and ensure the upholstery and paint are intact. 4. Firewall Examination: Look at the firewall for any signs of fire exposure or blackening.
5
1
Share

How to manually reset the maintenance light on a 2018 Sagitar?

The method to manually reset the maintenance light on a 2018 Sagitar is: 1. Press the maintenance button while turning on the ignition; 2. After hearing a beep, release the maintenance button and hold for two seconds; 3. Keep the ignition switch unchanged, then press and hold the button next to the instrument panel. Taking the Sagitar 2020 200TSI Manual Fashion model as an example, its dimensions are 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm and a fuel tank capacity of 50 liters. The front suspension of this car is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. It is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 116PS, a maximum power of 85kW, and a maximum torque of 175Nm, paired with a 5-speed manual transmission.
6
4
Share

What does 90℃ on the Volkswagen dashboard mean?

90℃ on the Volkswagen dashboard indicates a coolant temperature of 90 degrees. It is normal for the Volkswagen temperature gauge to consistently display 90°C, as the normal operating temperature for Volkswagen vehicles is 90 degrees. After starting the vehicle and during driving, a coolant temperature between 90-100 degrees is considered normal. The temperature gauge is displayed on the dashboard. Below are solutions for when the temperature gauge shows excessively high readings: Solution 1: Insufficient coolant in the cooling system causing the engine to overheat. Stop the vehicle, wait for the engine to cool down, and then add coolant. Solution 2: A loose or broken water pump or fan belt causing engine overheating. Visit a repair shop to replace the relevant components. Solution 3: The radiator grille or radiator core ventilation ducts are blocked by debris, leading to poor heat dissipation and engine overheating. Replace the radiator grille or clean out the debris. Solution 4: Insufficient engine oil or substandard oil quality causing engine overheating. Simply replace with high-quality engine oil.
2
5
Share

What does it mean to not attend driver training for Subject 1?

The reason for this situation may be insufficient driving lesson hours or personal information not yet entered into the system. Below is a relevant introduction about the driver's license examination content: 1. Examination content: The test subjects include three items: traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving). Before each subject test, an appointment must be made (special circumstances can be scheduled through the driving test green channel), and the test is taken after the appointment. After completing the Subject 1 test, you should pass Subject 2 and Subject 3 within three years. If you cannot pass, the test content will be invalidated, and you must re-register for the Subject 1 test. After the new examination rules, both Subject 2 and Subject 3 have five attempts. If you cannot pass the test within these five attempts, you must retake the Subject 1 test. 2. Passing standard: The full score is 100, and a score of 90 or above is considered passing (including 90).
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.