What is the motor power of the RX5 pure electric model?

2 Answers
Paula
07/24/25 8:08am
This vehicle's electric motor delivers a maximum power of 85kW and a peak torque of 255Nm. 1. It is a single-motor model equipped with a ternary lithium-ion battery. Most pure electric vehicles utilize ternary lithium batteries due to their high energy density and relatively low weight, making them particularly suitable for pure electric family cars. 2. According to MIIT ratings, this model offers a driving range of 320 kilometers, which represents commendable performance. The RX5 pure electric version features a MacPherson independent front suspension and a multi-link independent rear suspension.
Was this review help?
15
3
Share
StJonathan
08/11/25 3:46am
The maximum power of the Roewe RX5 pure electric version's motor is 135kW, which is approximately 184 horsepower. I find this power setting quite reasonable. As a daily driver, it feels very powerful during acceleration, especially when starting and stopping at city traffic lights, with quick response. Combined with the battery system, it offers a decent range, typically between 400 to 500 kilometers. The driving experience is quiet and smooth, with seamless power delivery and no jerking. If you're considering buying a pure electric vehicle, the power is practical enough without excessively draining the battery and affecting the range. I've driven my friend's car a few times and felt it's more than sufficient for household use, even for occasional long trips, and charging is convenient.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

Solutions for Sudden Continuous Sound from Car Audio System

Solutions for sudden continuous sound from car audio system are: 1. Turn the volume potentiometer to the lowest level. If there is a humming sound, it may be caused by the altered or insufficient capacity of the filter circuit electrolytic capacitor in the amplifier. If there is a loud humming sound when the volume is increased, it may be due to poor shielding of the audio input in the amplifier. Check and rectify the shielding issue; 2. Ensure all component casings are properly grounded, and use shielded cables for audio input lines with good grounding; 3. If there is a hissing sound from the speakers, it is mostly due to poor overall shielding or inadequate isolation between the primary and secondary windings of the power transformer. Try reversing the power plug or connect two 4700p capacitors with a working voltage of 250V in series at the power input, with the center tap grounded, to reduce noise.
13
4
Share

Where is the air conditioning filter located in a 2011 Haval H5?

The 2011 Haval H5 model does not come with an air conditioning filter. The air conditioning system with a filter started being installed in the latter half of 2012. For models with the filter, it is located outside the front windshield on the passenger side, behind the engine compartment, under a plastic cover. Loosen a screw and lift the cover to access it. The steps to replace the car's air conditioning filter are as follows: 1. Open the glove box and pull down the small hook on the right side. 2. Squeeze both sides of the glove box inward to remove it. 3. For the air conditioning filter compartment, release the clips on both sides to pull it out. 4. Remove the old filter, install the new one, and reassemble the glove box to complete the process.
5
5
Share

What is the Difference Between 4WD and 2WD Vehicles?

Here are the differences between 4WD and 2WD vehicles: 1. Different driving methods: 2WD means that only two wheels are the driving wheels, connected to the vehicle's power system. 4WD refers to the form where the vehicle maintains four-wheel drive throughout the entire driving process. 2. Different fuel consumption: The four-wheel drive mode can provide better off-road and handling performance at any time, but it cannot adjust torque distribution according to road conditions and has higher fuel consumption. 3. Different numbers of differentials: The differential in a 2WD vehicle allows the left and right (or front and rear) driving wheels to rotate at different speeds. In 4WD, to drive all four wheels, all wheels must be connected. If the four wheels are mechanically connected, an intermediate differential is required to adjust the speed difference between the front and rear wheels.
13
0
Share

What are the maintenance items for a vehicle at 25,000 kilometers?

Maintenance items for a vehicle at 25,000 kilometers: Replace engine oil and oil filter, air filter, cabin air filter, clean the throttle body, rotate tires; Check if all fluids are at standard levels, inspect the tightness of chassis bolts, ensure lights are functioning properly, and also check tire pressure and brake pads for normal condition. Vehicle maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle servicing. The purpose of vehicle maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
13
2
Share

What is the traffic violation code 10393?

Traffic violation code 10393 means: The motor vehicle is parked in violation of regulations, obstructing the passage of other vehicles and pedestrians, and the driver is not present at the scene. Here is some relevant information: 1. In code 10393, the first digit '1' indicates the implementation rules of provinces, autonomous regions, or municipalities; the second digit '0' means no points are deducted; '39' is a sequential code, representing the behavior under the same classification. 2. Traffic violation codes are a set of coding regulations established by the Ministry of Public Security for traffic violations committed by motor vehicles and pedestrians. By querying the traffic violation code, the specific violation of the driver can be quickly identified, thereby speeding up the penalty process for traffic violations.
15
4
Share

How to Identify When Car Engine Oil Needs Replacement

Methods to identify when car engine oil needs replacement are: 1. Use the oil dipstick to drip a few drops of oil onto your finger, then rub it repeatedly. If you feel impurities or poor viscosity, consider replacing it; 2. Remove the oil dipstick and observe the oil droplets under strong light. If visible impurities are present, replacement is needed. Method for changing car engine oil: Use a jack to lift the front of the vehicle or place it on a bridge frame for easy access underneath. Remove the bottom protective panel to expose the oil filter and drain plug. Unscrew the drain plug on the oil pan (note that oil will spray out when loosening), position an oil container beneath the vehicle to collect the old oil, then proceed with replacing the new oil.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.