What is the motor power of the Golf Electric?

From which side is the cylinder firing order counted for the Audi A6 2.8?

Audi A6 2.8 cylinder firing order starts with cylinder one from the free end near the engine. Audi A6 cylinder arrangement: V-shaped arrangement, with cylinders 1, 2, 3 from front to back on the left side, and cylinders 4, 5, 6 from front to back on the right side. Audi A6 cylinder firing order: For inline six-cylinder engines, the firing order is always 1-5-3-6-2-4. When seated in the driver's seat, if the cylinder order is from front to back on the right side as 1, 3, 5, and from front to back on the left side as 2, 4, 6. The most commonly used firing order for inline six-cylinder engines is: 1-5-3-6-2-4, and another is 1-4-2-6-3-5; V-type engine cylinder numbering methods are not uniform, and the firing order is generally: 1-4-5-2-3-6.

13

0

Share

Does Dual Clutch Mean Automatic Transmission?

Dual clutch refers to the dual-clutch transmission. Simply put, it means there are two sets of clutches working simultaneously: 1. managing the odd-numbered gears, and 2. managing the even-numbered gears. This design aims to avoid the power interruption issue during gear shifts in traditional manual transmissions, achieving the goal of rapid gear shifting. Dual clutch is a type of automatic transmission. The dual-clutch transmission differs from conventional automatic transmission systems; it is based on manual transmission yet belongs to automatic transmission, serving as a transmission mechanism that can both transmit and cut off power. Its main functions are to ensure smooth vehicle starts, reduce the impact load on transmission gears during shifts, and prevent overload in the transmission system.

16

4

Share

Is it normal for the Geely Panda's temperature gauge to show 9?

It is normal for the Geely Panda's temperature gauge to show 9. Here is the relevant introduction: Coolant sensor: The coolant sensor in the Geely Panda is an essential component in engines using a three-way catalytic converter to reduce exhaust pollution. Air-fuel ratio of the mixture: Since the purification capability of the three-way catalyst for CO, HC, and NOx drops sharply once the air-fuel ratio of the mixture deviates from the theoretical air-fuel ratio, an oxygen sensor is installed in the exhaust pipe to detect the oxygen concentration in the exhaust and send feedback signals to the ECU. The ECU then adjusts the fuel injection amount of the injector to keep the air-fuel ratio of the mixture near the theoretical value.

14

1

Share

What is the fuel tank capacity of the Peugeot 408?

The fuel tank capacity of the Peugeot 408 is 53L. This data is officially released, and owners who have purchased the Peugeot 408 can also check it on the vehicle's configuration sheet. The fuel grade for the Peugeot 408 is 92, with a fuel consumption of 5.2 to 5.8L per 100 kilometers. A full tank can cover a distance of 914 to 1019km. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is the volume from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to ensure that the fuel inside the tank can expand when the temperature rises without overflowing the safety space of the tank. If fuel is added up to the tank opening during refueling, the actual refueling amount may exceed the marked fuel tank capacity.

2

Share

What Causes Oil Leakage in the Corolla High-Pressure Fuel Pump?

Regarding the causes of oil leakage in the Corolla high-pressure fuel pump, the following factors are involved: Component Damage: The oil seal on the hydraulic pump spindle is damaged, or the spindle has defects or scratches; excessive internal leakage increases pressure at the oil seal, leading to damage or displacement of the seal; the drain pipe is too thin or too long, causing leakage at the seal. Solution: Repair or replace the damaged components. Seal Aging: Oil leakage is mainly concentrated at the timing cover position, caused by loose external oil pipes on the hydraulic pump of the crankshaft position sensor, damaged pipe joints, or aged or cracked sealing gaskets. Solution: Replace the sealing ring on the crankshaft position sensor.

16

2

Share

What does Audi NAV mean in a car?

Audi NAV button is the navigation system button. Here are the relevant introductions: NAV: It is the abbreviation for Navigation, referring to the vehicle navigation system, which features GPS global positioning system functionality, enabling drivers to know their exact location anytime while driving. It also includes automatic voice navigation and optimal path search functions. Audi: It is a luxury car brand under the Audi AG, a subsidiary of the German Volkswagen Group, headquartered in Ingolstadt, Germany, with branches in many countries including China. The main models under Audi include A1, A3, A4, A5, A6, A7, A8, Q1, Q2, Q3, Q5, Q7, Q8, TT, R8, as well as the S and RS performance series.

2

Share

What is the motor power of the Golf Electric?

From which side is the cylinder firing order counted for the Audi A6 2.8?

Does Dual Clutch Mean Automatic Transmission?

Is it normal for the Geely Panda's temperature gauge to show 9?

What is the fuel tank capacity of the Peugeot 408?

What Causes Oil Leakage in the Corolla High-Pressure Fuel Pump?

What does Audi NAV mean in a car?

How many liters of engine oil does a Subaru 2.5 need?

Where is the handbrake located on a Mercedes-Benz off-road vehicle?

What are the signs of a bad starter motor?

Does the Geely Boyue's throttle need to be matched after cleaning?