···
Log in / Register

What is the most suitable position for adjusting the driver's seat during practice driving?

3 Answers
SanBethany
07/23/25 12:44pm
When the brake is fully depressed, the knee joint should be slightly bent, at which point the front and rear position of the seat is most appropriate. Below are the relevant details: 1. Seat height: Generally, the lower the seat height, the better, as long as sufficient visibility is ensured. A lower seat height means a lower center of gravity, resulting in less body movement when driving on bumpy roads or turning, which also enhances comfort. 2. Visibility: While driving, in addition to having a clear view of the road ahead, a "sky view" is also necessary to help the driver see various signs, cameras, and other information. Sitting lower provides a larger "sky view."
Was this review help?
15
3
Share
OEmery
08/10/25 10:40am
When it comes to adjusting the driver's seat for practice, safety is my top priority, especially after driving for over a decade and witnessing accidents. First, ensure your hips are firmly against the seatback, with your back fully supported, and leave a fist's distance between your head and the car roof. When pressing the clutch and brake pedals fully, keep your knees bent at a 15-degree angle to prevent slipping during emergency braking. Adjust the steering wheel so your wrists naturally rest on its upper edge, allowing you to turn it 120 degrees comfortably without shrugging. Don’t forget to check your visibility—sit high enough to see the full view ahead and in the rearview mirror to avoid blind spots. Spending a few minutes fine-tuning before practice makes your exam maneuvers more precise and can truly save lives.
Was this review help?
9
4
Share
Expand All
JuliannaMarie
09/22/25 4:18am
Adjusting the seat is a daily routine for me, having driven a taxi for half my life. The key is comfort without straining the back. First, sit on the seat and adjust the height so that your eyes are level with the ground for a clear view of the dashboard. Ensure sufficient support for the lower back and neck, with the backrest tilted at about 100 degrees to avoid stiffness. When pressing the pedals, keep a 90-degree angle between the thighs and calves to prevent restricted blood flow and leg numbness over time. Adjust before each drive, and even on long trips lasting several hours, you won't suffer from back pain or fatigue—especially in city traffic, your body will feel much more relaxed.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

How to Repair a Hole in a Car Chassis?

Specialized tar cleaner can quickly penetrate and dissolve asphalt, effectively removing tar and asphalt stains, providing excellent stain removal, cleaning, and polishing effects. Essential balm can also dissolve asphalt. Apply a few drops of essential balm on the asphalt surface of the car body, wait for 5 minutes, and then wipe it clean with a damp towel. Diesel can similarly dilute and dissolve asphalt. After dissolving the asphalt, simply wipe it clean. Use a soft brush or cloth dipped in turpentine or benzene solution to scrub, then wash with soap solution, and finally rinse with clean water.
20
1
Share

What to Do When the Qoros 5 Steering Wheel is Locked?

When you find the steering wheel locked, after starting the vehicle with the key, gently turn the key with your right hand and lightly rotate the steering wheel with your left hand, and the steering wheel will naturally unlock. If you encounter a situation where the steering wheel won't turn and the key won't twist, it's actually because the steering wheel automatically locks after the vehicle is turned off. Starting the vehicle with the key will unlock it. When turning the steering wheel, avoid using excessive force or making sudden turns. Do not rotate the steering wheel after the vehicle has come to a stop. When driving on bumpy roads, hold the steering wheel firmly with both hands to prevent loss of control and potential accidents.
11
4
Share

What to Do When Your Scooter Runs Out of Battery?

The principle of push-starting is to utilize the magneto in the scooter to generate electricity during the pushing process. Shift to 3rd gear, then hold the clutch, and the scooter will start. When your scooter runs out of battery, you can look for the nearest charging station. Then use a charger to recharge the battery. Bring two scooters close enough so that the jumper cables can connect the positive and negative terminals of both batteries. Once connected, you can proceed with jump-starting. The rescue vehicle should get as close as possible to the front of the scooter without power to charge it.
11
1
Share

What to Do When a Scratch Accident Occurs on the Road?

When a vehicle scratch accident occurs, the first step is to find a suitable location to park, turn on the hazard warning lights, and place a warning sign behind the car. Check the extent of the damage caused by the scratch, take photos as evidence, and ensure that the accident scene is clearly visible. After gathering evidence, record the other party's vehicle information, including their license plate number, driver's license, vehicle registration, and insurance details, to ensure all information is complete. According to traffic laws, determine liability and reach an agreement once the responsible party is identified. Immediately call the insurance company to have them document the incident, proceed with vehicle repairs, and finally submit the invoice to the insurance company to claim compensation.
8
4
Share

How to Adjust the Air-Fuel Mixture on a Scooter Motorcycle?

When adjusting the air-fuel mixture, first ensure there are no leaks in the intake manifold, the valve clearance is within the standard range, and there are no air leaks. Start the vehicle and let it warm up for a few minutes. Turn the mixture screw all the way in, being careful not to apply excessive force, then unscrew it approximately 1.5 turns and start the engine. Slightly tighten the idle screw inward to adjust the idle speed to above 1500 RPM for a stable idle. If the idle speed exceeds this position, slowly adjust the mixture screw back to find the point where the engine speed was highest. Use a small flathead screwdriver to slowly rotate the air mixture screw outward, repeating the adjustment steps to find the optimal position.
3
5
Share

What is the Cadillac CT5 User Guide?

Includes Electronic Stability Program (ESP), parking radar/camera, auto hold, auto start-stop, internal/external air circulation, and synchronized temperature zones. Includes window lock button, one-touch window control switches, exterior rearview mirror adjustment switches (angle adjustment, folding function), and central locking button. Includes sunroof switch, light switch, sunshade switch, and lights-on-with-door feature. Activation method: Press the button on top of the light control stalk to enable adaptive headlights, which adjust based on vehicle speed and steering angle.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.