What is the most suitable angle to adjust the car rearview mirror?

2 Answers
JustinAnn
09/01/25 5:04am
Adjustment of suitable angles is introduced as follows: 1. Central rearview mirror: The central rearview mirror can help the owner quickly judge the road conditions behind and maintain a safe distance from the vehicles behind. Adjust the central rearview mirror so that it is parallel to the horizon and the horizon is placed at the 1/2 position in the center of the mirror surface. The mirror surface should slightly face the driver to ensure a clear view of the vehicles directly behind. 2. Left rearview mirror: Because the left rearview mirror is on the driver's side, the driver's blind spot is smaller, and the field of vision obtained is wider. The adjustment angle is relatively not as large as that of the right rearview mirror. Similarly, adjust the horizon to the 1/2 position in the center of the left rearview mirror, and let 1/4 of the car body be visible in the mirror. If too little of the car body is visible, it will be difficult to see vehicles close to the rear; if too much of the car body is visible, it will be difficult to see vehicles that are already partially parallel. 3. Right rearview mirror: Because it is on the right side, the driver's blind spot will be larger, so the adjustment angle is different from that of the left rearview mirror. At this time, the horizon should be adjusted to the 2/3 position of the right rearview mirror, and 1/4 of the car body should also be visible.
Was this review help?
9
1
Share
SanKhloe
09/13/25 7:50am
I remember when I first started learning to drive, my instructor always emphasized that improperly adjusted rearview mirrors could easily lead to accidents. Over the years, I've strictly adhered to one principle: first, sit comfortably in the driver's seat with an upright posture, then adjust the interior rearview mirror to fully cover the rear window without any blind spots—this is a lifesaving key. As for the left side mirror, I adjust it so that the outline of the car body is slightly visible, just enough to see a glimpse of the rear door handle. The right side mirror, on the other hand, should show less of the car body, occupying only about one-fifth of the view to minimize blind spots. Before changing lanes, make it a habit to turn your head and look, not just rely on the mirrors. When I was younger, I misadjusted them once and scraped the rear of a car. Now, every time I hit the road, I check the mirror angles. As a veteran driver with over a decade of experience, I find this method the most reassuring and reliable—safety always comes first.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

What type of vehicle is the Land Cruiser?

Land Cruiser is a flagship large-sized SUV, a full-size off-road vehicle. Its prototype is the Toyota Jeep BJ. The vehicle's dimensions are 5170mm in length, 1975mm in width, and 1930mm in height, with a wheelbase of 2850mm. It features a double-wishbone independent front suspension and a four-link non-independent rear suspension. The domestic version of the Land Cruiser is equipped with two engines: a 4.0-liter naturally aspirated engine and a 4.6-liter naturally aspirated engine. While inheriting the original design DNA, its exterior evolves towards a fresh, advanced style of the new era. This is a hardcore off-road vehicle with four-wheel drive and four-wheel disc brakes.
12
3
Share

What are the Nissan car brands?

Nissan car brands include Subaru, Mitsubishi, Honda, Toyota, Nissan, Mazda, Lexus, Acura, Infiniti, etc. Nissan is a company whose business covers automobile manufacturing, shipbuilding and aerospace technology. It was founded in 1933. Automobile products are divided into practical types (i.e. trucks, minivans and four-wheel drive vehicles), luxury cars and ordinary cars. Mazda is a Japanese automobile manufacturer founded in 1920 and headquartered in Hiroshima, Japan. Mazda has two models: a 5-door hatchback and a 4-door sedan. The length, width and height of the car are 4515mm, 1745mm and 1465mm respectively, and the wheelbase is 2640mm.
19
3
Share

What Are the Causes of Steering Wheel Vibration in Cars?

There are several reasons for steering wheel vibration in cars: 1. It may be caused by tire deformation or issues in the vehicle's drivetrain; 2. Worn or loose ball joints in the tie rods, or detachment of rubber bushings at the joints, etc. Solutions include: 1. Inspect the static balance of the wheels and check for excessive tire deformation—replace if deformed; 2. Have a professional repair shop inspect and replace any damaged components. The steering wheel is typically connected to the steering shaft via splines, and its function is to convert the force applied by the driver on the steering wheel's edge into torque, which is then transmitted to the steering shaft. Using a larger diameter steering wheel can reduce the hand force required from the driver during steering.
7
4
Share

How to Use Car Turn Signals?

Method for using car turn signals: If turning left or changing lanes to the left, the left turn signal should be activated in advance; if turning right or changing lanes to the right, the right turn signal should be activated in advance. Turn signals are an important lighting system in a car and should be used when turning or changing lanes to alert drivers behind. Failure to activate turn signals before turning or changing lanes can easily lead to accidents. When driving, it is crucial to use turn signals before changing lanes, as this signals drivers in adjacent lanes to slow down and yield. Learning to use turn signals correctly helps improve driving safety. If a vehicle's turn signals malfunction, they should be repaired promptly to avoid compromising driving safety.
4
0
Share

What are the symptoms of a bad steering linkage ball joint?

Symptoms of a bad steering linkage ball joint include: 1. A clicking sound when turning; 2. Feeling a large gap in the steering wheel and unstable direction while driving; 3. In mild cases, it can cause unstable steering, while in severe cases, it can lead to sudden wheel misalignment or detachment, especially at high speeds. The steering linkage is a crucial component in a car's steering mechanism, directly affecting the vehicle's handling stability, driving safety, and tire lifespan. The ball joint of the linkage is a rod with a ball joint housing, where the ball joint of the steering spindle is placed inside the housing. The ball joint is hinged to the edge of the shaft hole of the housing via a ball joint seat at its front end. The needle roller between the ball joint seat and the steering spindle is embedded in the groove of the seat's inner hole surface, which helps reduce ball joint wear and improves the spindle's tensile resistance.
11
2
Share

What Causes the Smell of Gasoline When Starting a Car?

When starting a car, the smell of gasoline is caused by incomplete combustion of fuel. When the car is started while cold, the vehicle's computer will appropriately increase the fuel injection volume based on the intake air temperature and coolant temperature signals. At this time, the engine has not yet reached its normal operating temperature, resulting in poor combustion efficiency. This causes some fuel to be expelled without being fully burned, leading to a strong gasoline smell during cold starts. This situation is particularly common in winter. The normal operating temperature of an engine is between 80 to 90 degrees Celsius. Once the engine reaches this temperature, the vehicle's computer will reduce the fuel injection volume accordingly. Under normal operating temperatures, the fuel will be fully combusted, and the gasoline smell will disappear.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.