What is the most accurate reference point for straight-line driving in Subject 2?

1 Answers
LeBrody
07/29/25 3:05pm
For straight-line driving in Subject 2, use the left corner of the vehicle as your reference point. Below are some key considerations for maintaining straight-line driving: 1. Vision: Don't focus solely on what's close. To keep the vehicle moving straight ahead, you must learn to look far ahead while using your peripheral vision to monitor the front of the vehicle, the rearview mirrors, and nearby vehicles. 2. Speed: It's essential to control your speed during straight-line driving. Driving too slowly can actually cause the vehicle to veer off course. If there's a vehicle ahead, maintain a safe distance and slow down in advance if necessary. Remember to brake promptly after completing the straight-line section. 3. Steering wheel: If your vehicle keeps drifting during straight-line driving, don't assume that keeping the steering wheel perfectly still will prevent this. Road conditions, unbalanced wheel alignment, or uneven suspension support can all cause the vehicle to drift even when the steering wheel isn't moved. Therefore, make sure to make slight adjustments as needed.
Was this review help?
18
2
Share
More Forum Discussions

Is car repair free during the warranty period?

Car repairs are free during the warranty period. The following is an introduction to situations where the car cannot enjoy warranty service: 1. Failure to perform maintenance as required. After purchasing a new car, if the owner does not go to the designated 4S shop or the manufacturer's authorized service station for regular maintenance within the specified mileage, even if the car has problems during the warranty period, the owner will have to pay a certain repair cost. 2. Unauthorized modification of the vehicle. 3. Damage caused by improper use. The car warranty can only provide a certain degree of protection to customers. Damage caused by improper use or traffic accidents can only be borne by the user or their insurance company.
19
5
Share

Is driving a pickup truck at 120 km/h on the highway considered speeding?

Driving a pickup truck at 120 km/h on the highway is considered speeding. On highways, the maximum speed limit for small passenger vehicles is 120 km/h, while the speed limit for trucks is 100 km/h. Since pickup trucks are classified under the truck category, they must adhere to the truck speed limit standard, meaning their speed should not exceed 100 km/h. Even blue-plate pickup trucks are subject to the same 100 km/h speed limit on highways. If the speeding exceeds 50% or more, the driver will face an immediate deduction of 12 points from their license. Additional information: Below are some traffic regulations related to highway driving: 1. Maximum speed: On highways, the maximum speed for small passenger vehicles must not exceed 120 km/h; for other motor vehicles, it must not exceed 100 km/h; and for motorcycles, it must not exceed 80 km/h. 2. Penalties for speeding: For small vehicles, speeding less than 20% results in a warning; speeding between 20% and 50% incurs a fine of 200 yuan and a deduction of 3 points; speeding between 50% and 70% incurs a fine of 1,000 yuan and a deduction of 6 points or possible revocation of the driver's license; speeding over 70% incurs a fine of 2,000 yuan and revocation of the driver's license.
2
2
Share

Do Metal Valve Stem Caps Affect Wheel Balancing?

No impact, the weight of metal caps is basically negligible. Below is a detailed introduction to automotive wheel balancing: Concept: Automotive wheel balancing refers to the process performed to eliminate vibrations and additional force couples caused by unbalanced mass during wheel rotation. Even if a wheel is statically balanced, it may still be dynamically unbalanced. Effects of dynamic imbalance: Unbalanced rotation of the four wheels can cause wobbling and bouncing (visibly felt as steering wheel vibration at high speeds), leading to wave-like tire wear and reduced driving stability. At this point, preventing such unbalanced rotation becomes particularly important.
10
1
Share

What does 'Exam Appointment First Session 26' mean?

Exam Appointment First Session 26 refers to the serial number 26. Here is some extended information: 1. Exam Appointment First Session: The first session refers to the first batch of examinees who will enter the examination area following the examiner's instructions. The second session refers to the second batch of examinees who will enter after the first session is completed. This examination method is implemented due to the large number of examinees, to facilitate the management of examination order and the recording of examination results. Confirm your examination time based on your session to avoid prolonged waiting outside the examination area and overcrowding. 2. Teaching Objectives: Master the basic driving operation essentials, possess the fundamental ability to control the vehicle, proficiently grasp the basic methods of driving in the venue and on the road, have the ability to reasonably use vehicle control components and correctly control the spatial position of the vehicle, and be able to accurately control the vehicle's driving position, speed, and route.
15
2
Share

What brand is the RA motorcycle?

Here is the brand introduction of RA motorcycles: 1. The brand originates from the UK's Royal-Alloy, which meticulously replicates the globally popular scooter models of the last century with exquisite metal body craftsmanship, successfully sparking a retro craze for scooters. While preserving classic elements, it enhances vehicle quality with better materials and advanced technology. 2. The brand positions itself as a leader in retro scooters, with the 60s-70s MODS culture of the UK as the cornerstone of its brand spirit, gathering the most stylish and profound riders worldwide to create a unique RA era. 3. RA creates 'true classics' through fashionable design and outstanding performance, offering global riders a worthwhile modern experience. Classic models include the British retro scooter RA-GP200, among others.
5
4
Share

Does a gasoline engine have fuel injectors?

Gasoline engines do not require fuel injectors during the intake stroke as they draw in a mixture of air and gasoline; fuel injectors are used in diesel engines. Diesel engines do not need spark plugs to reach the ignition point for combustion because they have fuel injectors. Diesel Engines: Diesel engines compress the mixture of fuel and air during the compression stroke, raising the temperature to the ignition point, thereby igniting the fuel without the need for spark plugs. Gasoline engines, on the other hand, use an electronic igniter above the fuel injector to generate a spark, which ignites the gasoline to achieve combustion. This process requires the assistance of electrical components. Working Principle: The mechanical working principles of gasoline and diesel engines differ. The compression-ignition method of diesel engines means that diesel vehicles must compress the fuel to a certain degree before generating power, which results in louder combustion noise. In practical driving, the noise from diesel engines is noticeably louder than that of gasoline engines. Compared to gasoline, diesel has higher power, a higher ignition point, and is less volatile. Due to these characteristics, diesel engines are about 30% more fuel-efficient than gasoline engines.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.