···
Log in / Register

What is the model of the Teana fog light?

1 Answers
Jean
07/24/25 3:34pm
The Teana fog light model is H11, which is divided into front fog lights and rear fog lights. The front fog lights are usually bright yellow, while the rear fog lights are red. The characteristic of fog lights is that the light has extremely strong penetration ability, will not produce diffuse reflection due to fog, and can alert other vehicles to pay attention, effectively preventing accidents. Teana is a mid-to-high-end luxury sedan under NISSAN, with configurations including ventilated disc brakes, an inline 4-cylinder engine with dual overhead camshafts, standard seating for 5, a top speed of 210 km/h, and body dimensions of 4868mm in length, 1830mm in width, and 1490mm in height, with a wheelbase of 2775mm.
Was this review help?
7
0
Share
More Forum Discussions

How to Adjust the Car Steering Wheel to Be Straight?

Below are the methods to adjust the car steering wheel: It can be resolved by adjusting the tie rods. The steering tie rods are located behind the half-shaft. The direction the steering wheel leans indicates which side is longer. For example, if the steering wheel leans to the left, the left tie rod should be screwed in, while the right tie rod should be screwed out until both tie rods are of equal length. Reasons for the steering wheel being misaligned: If the steering wheel becomes misaligned after the vehicle has been used for a period of time, it may be related to tire pressure, tire wear, wear of various chassis components, or wheel alignment. First, measure the tire pressure on both sides. When the tire pressure is inconsistent on both sides, the vehicle will tend to drift toward the side with lower pressure. If the tread wear on the two front tires is uneven, it can also cause the vehicle to pull to one side. If there are no issues with the tires, it is recommended to visit a 4S shop to check the condition of the chassis components. Changes in wheel alignment values can also lead to steering wheel misalignment after some use. Additionally, the steering wheel may become misaligned due to the tie rod shifting to one side.
6
1
Share

At what voltage will a car fail to start?

If the car's voltage drops below 12.2V, it may fail to start. The no-load voltage of a car battery is typically around 13V. If it falls below 12V, it indicates battery aging; if the no-load voltage is below 11V, the battery is essentially unusable. Most car batteries have a voltage between 12.2V and 12.8V when the engine is not running. The battery is an essential part of a car and can be categorized into traditional lead-acid batteries and maintenance-free batteries. Batteries use lead-calcium alloy for the grid frame, which results in less water decomposition during charging and lower water evaporation. Additionally, the sealed structure of the casing minimizes the release of sulfuric acid gas. Compared to traditional batteries, these batteries offer advantages such as no need for liquid replenishment, easy connection to terminals, and longer power storage duration.
7
2
Share

What Causes the Odor When Turning on the Car Air Conditioner?

The reasons for the odor when turning on the car air conditioner: 1. The air conditioner evaporator has mold or foreign objects; 2. Not replacing the air filter for a long time can also cause odors when the air conditioner is turned on. The car air conditioner should be cleaned at least once a year. If the car air conditioner is not cleaned for a long time, it will accumulate a lot of dust, leading to secondary air pollution, which can affect the health of users when inhaled. Sometimes, the odor inside the air conditioner is also related to the owner's habits when using the air conditioner. It is recommended that the owner turn off the air conditioner cooling 5 minutes before reaching the destination and then turn on the natural air. This allows the temperature inside the air conditioner pipes to rise before parking and return to normal temperature, preventing condensation of water droplets inside the air conditioner pipes due to temperature differences after parking, thereby keeping the air conditioner pipes dry and preventing the growth of mold and fungi.
11
2
Share

Should Fuel Additives Be Used in New Cars?

New cars should not use fuel additives. Although fuel additives have benefits such as cleaning system carbon deposits, increasing octane rating, improving atomization, reducing wear, and protecting the engine, for new cars, using regular fuel is more beneficial in helping various components, especially the engine, to break in properly. Therefore, the use of additives is not recommended. Fuel additives can be categorized by their target use into gasoline additives and diesel additives, and by function into three types: cleaning, maintenance, and performance-enhancing. Both cleaning and maintenance types contain cleaning agents in their chemical compositions, which can effectively clean or inhibit engine carbon deposits. Based on different chemical compositions, additives are classified into five generations.
10
3
Share

How to Deal with Water Stains on Car Windows?

Methods to deal with water stains on car windows: 1. Add some dishwashing liquid to water, stir well, and use a car cleaning towel dipped in the solution to wipe the glass. After wiping the entire glass once or several times, wring out the towel and wipe again, which can basically solve the problem; 2. Alternatively, take one dry and one wet cloth. First, wipe both sides of the glass with the wet cloth, then use the dry cloth dipped in a small amount of white liquor to vigorously wipe the glass, which can make it clean and bright. Automotive windshield washer fluid, commonly known as glass water, can provide the driver with a clear and bright view when the transparency of the front windshield decreases. Especially during nighttime driving, dust on the glass can scatter light, so it is necessary to spray some glass water to keep the front windshield in a transparent state.
1
0
Share

Can Hybrid Vehicles Obtain New Energy License Plates in Shenzhen?

Whether hybrid vehicles in Shenzhen can obtain new energy license plates depends on the type of hybrid. Currently, only plug-in hybrid electric vehicles (PHEVs) are eligible for new energy license plates in China, while non-plug-in hybrid vehicles are not. The new energy vehicle license plates are categorized into two types: small new energy vehicle license plates and large new energy vehicle license plates. The dimensions of the new energy vehicle license plates are 480mm in length and 140mm in width. Small new energy vehicle license plates feature a gradient green color, while large new energy vehicle license plates use a yellow and green dual-color scheme. The new energy vehicle license plates are produced using pollution-free printing methods and environmentally friendly manufacturing processes. Additionally, they incorporate anti-counterfeiting technologies such as QR codes, anti-counterfeiting patterns, and laser designs to enhance security features.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.