What is the model of the original tires on the Lexus UX?

2 Answers
WilliamFitz
08/30/25 4:52am
The original tire models for the Lexus UX are 215/60R17 and 225/50R18. The functions of the tires are: 1. To transmit driving force, braking force, and steering force for vehicle operation; 2. To support the vehicle load; 3. To reduce and absorb vibrations and impact forces during driving, preventing severe vibrations from damaging vehicle components. Taking the 2020 Lexus UX as an example, its body dimensions are: length 4495mm, width 1840mm, height 1540mm, with a wheelbase of 2640mm. The 2020 Lexus UX features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 173PS, a maximum torque of 207Nm, and a maximum power output of 127kW.
Was this review help?
7
0
Share
JosephRose
09/12/25 2:05am
As a car enthusiast who has driven the Lexus UX, the original tires are typically sized 225/50 R18, such as the Bridgestone Dueler H/P Sport AS or Michelin Primacy. The 225 indicates a tire width of 225 millimeters, 50 is the aspect ratio accounting for 50% of the tire width, and 18 refers to the 18-inch wheel size. This design suits the balanced performance of compact SUVs, combining shock absorption and fuel efficiency. In actual driving, I found these tires to be quiet with excellent grip, especially stable during high-speed cornering. However, specific models may vary by trim level and production year—for example, higher trims might use Michelin. To maintain tire condition long-term, I recommend checking tire pressure and wear every 10,000 kilometers, cleaning them regularly to prevent debris from embedding in the treads, which can extend their lifespan to at least 50,000 kilometers.
Was this review help?
11
1
Share
Expand All
More Forum Discussions

What is the symbol for abnormal tire pressure?

The abnormal tire pressure indicator is shaped like a can with an exclamation mark inside. Whenever there is a change in the tire pressure, the tire pressure warning light will illuminate. This could indicate a problem with the tire, or it might be due to temperature changes. Of course, it could also be a sensor malfunction or a false alarm. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: The system usually triggers an alarm if the pressure is below 1.8 bar or above 3.0 bar. In this case, the tire should be inspected and the pressure adjusted. Tire pressure monitoring system not reset: After inflating the tires, if the tire pressure monitoring system is not reset in time, it will continue to display the previous data, causing the tire pressure warning light to stay on. Simply resetting the tire pressure monitoring system will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which is installed inside the tire and connected to the tire inflation valve, monitors the tire pressure. If the sensor is damaged during driving, such as by hitting a curb, it can also cause the tire pressure warning light to turn on. If the sensor is damaged, the only solution is to replace it with a new one.
8
2
Share

What Causes the Nissan Teana's One-Button Start to Fail to Detect the Key?

Here are the specific reasons and solutions for the Nissan Teana's one-button start failing to detect the key: 1. Battery depletion. For cars with batteries used for more than 2 years or parked for extended periods, check the battery voltage with a multimeter. Generally, the voltage should be around 12V when not in use and above 10V when starting, which can rule out battery issues. 2. Poor fuse contact. Gently tap the fuse box; if the car starts, it indicates poor fuse contact. 3. Starter motor failure. If the battery has power but no sound is heard from the starter motor when pressing the start button, it may be a starter motor issue, requiring replacement at a repair shop. 4. Ignition system failure. This includes faults in the ignition coil, spark plugs, or wiring. The S6 has two ignition coils and four spark plugs. The likelihood of both the ignition coil and spark plugs failing simultaneously is relatively high. Check the connections before and after the ignition coil to prevent loose connections and observe if the car can start. It is recommended to have this handled by professionals. 5. Fuel pump power failure. Unplug the fuel pump connector and measure the voltage or current when starting.
3
1
Share

What does Mercedes-Benz tire pressure calibration mean?

The tire pressure monitoring system has issued an alert. The tire pressure monitoring indicator is a yellow symbol, featuring an irregular circle without a seal on top, with four small spikes at the bottom and an exclamation mark inside. The illumination of the tire pressure monitoring indicator signifies abnormal tire pressure. Abnormal tire pressure is generally caused by the following three reasons: Abnormal tire pressure: Typically, an alert is triggered when the pressure is below 1.8bar or exceeds 3.0bar. At this point, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator to illuminate. In this case, simply performing a tire pressure reset will suffice. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged due to impact while driving, it can also cause the tire pressure warning light to turn on. For sensor damage issues, only replacement with a new component is possible.
5
0
Share

Can the vehicle pass the inspection if the original owner has replaced the vehicle license?

The vehicle cannot pass the inspection if the original owner has replaced the vehicle license. After the replacement, the old vehicle license becomes invalid and cannot be used. If the party involved uses it, it constitutes an act of obtaining a replacement vehicle license by deception, which may result in a warning or a fine. Additional information: 1. According to Article 58 of the "Regulations on the Registration of Motor Vehicles": If motor vehicle registration is obtained by deception, bribery, or other improper means, the public security traffic management department shall confiscate the motor vehicle registration certificate, license plate, and vehicle license, and revoke the motor vehicle registration; the applicant shall not apply for motor vehicle registration within three years. For motor vehicles suspected of smuggling or theft, they shall be transferred to the relevant departments for handling. 2. Replacement and renewal of certificates and other services: If replacement or renewal of motor vehicle registration certificates, license plates, vehicle licenses, and inspection qualification marks is processed by deception, bribery, or other improper means, the public security traffic management department shall issue a warning or impose a fine.
16
5
Share

What is the average lifespan of brake pads in kilometers?

Brake pads do not have a fixed lifespan. Under normal circumstances, the front brake pads should be replaced within 30,000 to 50,000 kilometers, and the rear brake pads within 50,000 to 70,000 kilometers. The following situations require replacement of brake fluid: 1. After the vehicle has traveled 40,000 kilometers under normal driving conditions or if the brake fluid has been in continuous use for over 2 years, the brake fluid can easily deteriorate due to prolonged use, so it is important to replace it promptly. 2. If the vehicle experiences inconsistent braking force during normal driving, the brake fluid should be replaced immediately. Before replacement, clean the braking system thoroughly with alcohol. 3. If the vehicle exhibits braking deviation, conduct a comprehensive inspection of the braking system. If the wheel cylinder rubber cups are found to be excessively swollen, it may indicate an issue with the brake fluid quality. In this case, replace the brake fluid with a higher-quality product and also replace the rubber cups. 4. If water is mixed into or absorbed by the brake fluid, or if impurities or sediment are found in the brake fluid, replace or carefully filter it immediately. Otherwise, it may result in insufficient braking pressure, affecting braking performance. 5. During seasonal changes, especially in winter, if braking performance declines, it may be due to the brake fluid grade not being suitable for winter conditions. In this case, replace the brake fluid with one that has lower viscosity at low temperatures.
1
3
Share

What are the reasons for the lack of cooling in the Chery Arrizo 5 air conditioning system?

Chery Arrizo 5 air conditioning system may fail to cool due to the following reasons: 1. Compressor capacitor damage or malfunction: This can cause the compressor to stop working. 2. Room temperature sensor resistance value change: This leads to the outdoor unit not working (the symptom is similar to the air conditioner shutting down after reaching the set temperature). 3. Damage to the indoor or outdoor fan (often due to capacitor failure): Failure of the outdoor fan manifests as excessively high exhaust temperature or high-pressure protection, while failure of the indoor fan results in frost formation on the indoor unit, continuous operation of the outdoor unit, and condensation on the indoor unit. 4. Other factors: Issues such as low power supply voltage reducing the electromagnetic clutch's pull force, or oil contamination between the clutch pressure plate and pulley, can cause a "slipping" phenomenon similar to a loose drive belt. If the evaporator surface frosts over or the blower motor speed decreases, it can also lead to insufficient cooling. Additionally, compressor wear or valve leakage can result in inadequate cooling performance. 5. Refrigeration system issues: Common faults like insufficient cooling or reduced cooling efficiency are often caused by refrigeration system sealing problems. Modern automotive refrigerants have strong permeability, requiring high system sealing standards. Even minor leaks in refrigeration pipelines or valves can cause insufficient cooling.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.