What is the model of the original battery for the Atenza?

2 Answers
Carrie
07/28/25 3:10pm
The original battery model for the Atenza is Yuasa Q85. Below is relevant information about the original battery for the Atenza: 1. Introduction: The battery model for the Atenza is Yuasa Q85. This battery has a relatively long service life and strong power storage capability, making it one of the commonly used battery models in the automotive market. The batteries used in currently available vehicles on the market are mainly divided into three categories: standard batteries, dry-charged batteries, and maintenance-free batteries. 2. Maintenance: During the use of the vehicle, it is essential to regularly maintain the battery to prevent difficulties in starting or stalling due to power depletion, which could affect the normal operation of the vehicle.
Was this review help?
12
4
Share
AndersonMarie
08/11/25 10:48pm
The original battery model for the Atenza is generally Q-85. This Q-85 refers to a specification with a capacity of 60 ampere-hours and a voltage of 12 volts. The overall size and performance are tailored to Mazda's design requirements. During my daily driving, I noticed that the battery is located in the engine compartment, on the left side, and can be seen by opening the cover. It is quite durable and can typically last three to four years under normal use. However, if you encounter difficulties starting the car or dimming lights, it's necessary to check if the battery is aging or not holding a charge. Some older models, such as those from 2014, also use this battery model, but newer versions may have minor modifications. Regular maintenance after purchasing the car is crucial—don’t wait until it completely fails to replace it, as this could lead to the inconvenience of stalling on the road.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

What is the trunk size of the Lavida?

The trunk volume of the Lavida is 510L. Below are the relevant details about the Lavida: 1. Market Positioning: The Lavida is positioned to target the best-selling compact sedan in the current market. Its design originated from the Nezha concept car showcased at the 2006 Beijing Auto Show. 2. Exterior Design: The front fascia of the Lavida differs significantly from previous Volkswagen A-segment models, particularly its unique teardrop-shaped headlights. The Lavida's bumper design is also distinctive, with its thick and powerful curves harmoniously integrated, serving as the highlight of the front face. 3. Interior Design: Four prominent round air vents are a standout feature of the Shanghai Volkswagen Lavida's interior. The chrome-plated knobs and rings make these vents highly noticeable. Combined with the two prominent circular speedometer and tachometer dials on the dashboard, these six parallel circles form the upper part of the Lavida's interior design characteristics.
5
4
Share

What are the benefits of valve exhaust?

This type of exhaust system allows for switching between different sound levels. Below is a related introduction to valve exhaust: 1. The valve exhaust system used for modifications is primarily designed to alter the sound level of the exhaust pipe. The advantage of this exhaust system is the ability to switch between sound levels. For example, when driving on highways or entering residential areas, closing the valve results in a very quiet sound, making long-distance driving more comfortable without disturbing others. If you want a sporty sound, simply open the valve, and the sound waves will come out in waves. Currently, valve exhaust systems are quite suitable for domestic conditions. 2. When the valve is closed, the exhaust sound is relatively small, while opening the valve increases the exhaust sound to a sporty level. Valve exhaust systems are mainly controlled by a remote, but there are also other control methods such as mobile app control and automatic RPM control. Pressing the open button on the remote sends a wireless signal to the valve controller, which then issues a command to open the valve. The controller requires power, and generally, ACC power is most suitable.
20
1
Share

What Does Tire Rotation Mean?

It refers to the uneven wear patterns between front and rear tires. Since front tires bear more pressure and steering forces than rear tires, it's recommended to swap the left front tire with the right rear tire, and the right front tire with the left rear tire every approximately 10,000 kilometers. This practice increases tread friction with the road surface and improves traction. Additional Information: 1. Rotation Interval: Depending on different driving habits and routes, refer to the vehicle's maintenance manual for regular tire rotation. The rotation interval is generally 10,000km for new cars, then every 5,000km to 10,000km thereafter. 2. Extending Tire Life: Develop a habit of regularly checking tire pressure. Proper inflation is crucial for extending tire lifespan - consistently overinflating by 20% reduces tire life by 10%, while consistently underinflating by 30% decreases tire life by 52%. 3. Consistent Pressure: Tire pressure is vital for tire longevity. Underinflation causes increased tire deformation, sidewall cracks, excessive heat buildup, rubber deterioration, and ply fatigue/fracture.
10
0
Share

What brand is the audio system in the Cadillac XT4?

The audio system in the Cadillac XT4 is from BOSE. The two-wheel-drive Technology, Luxury, and Luxury Sport trims of the Cadillac XT4 are equipped with 6-7 speakers, while the two-wheel-drive Premium trim and above come with 13 speakers. Here is some relevant information: 1. The Cadillac XT4's speakers are generally installed inside the front bumper of the vehicle. Some models require the bumper to be removed for replacement. The car horn control switch is usually located on the left and right edges of the steering wheel, marked with a small horn symbol. The horn is the vehicle's audio signal device. 2. When driving on narrow two-lane roads, such as rural or mountain roads, overtaking often requires borrowing the opposite lane. In such cases, it is advisable to honk the horn before overtaking to alert the vehicle ahead and avoid accidents. 3. When driving, honking the horn before entering a curve can alert the opposite lane to avoid crossing the line. If you receive a horn signal from the opposite direction before a curve, it is recommended to respond with a honk as well.
18
0
Share

What to Do If You Accidentally Enter a Wrong-Way Lane When Turning Right?

If a car accidentally enters a wrong-way lane after turning right, it must stop immediately, pull over to the side with hazard lights on, and call the traffic police for assistance. Wrong-way driving on a one-way street refers to the act of making a U-turn on a road designated for one direction of travel and proceeding in the opposite direction. Consequences of Wrong-Way Driving on a One-Way Street: This behavior is prone to causing traffic accidents and is strictly prohibited by law. On highways, wrong-way driving results in an immediate deduction of 12 points from the driver's license, a fine of 200 yuan, and possible suspension of the driver's license for twelve months. System Delays in Traffic Violation Query Platforms May Cause Delays in Clearing Fine Records: From the moment a violation occurs, it undergoes steps such as being captured, confirmed, and publicized. Similarly, processing the violation's point deduction and paying the fine also requires the system to follow corresponding procedures.
18
1
Share

Is the Hongqi HS5 compliant with China VI emission standards?

Hongqi HS5 meets the China VI emission standards. Here is relevant information: 1. China's sixth-stage motor vehicle pollutant emission standards refer to the standards established to implement the "Environmental Protection Law of the People's Republic of China" and the "Air Pollution Prevention and Control Law of the People's Republic of China," aiming to prevent pollution from the exhaust of compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. 2. The early implementation of China VI standards will be divided into two phases. The first phase requires all light-duty diesel vehicles sold from July 1, 2018, to comply with China VI standards. 3. The second phase requires all light-duty gasoline vehicles sold from January 1, 2019, to comply with China VI standards. During these two phases, light-duty diesel and gasoline vehicles that do not meet the standards and are sold or transferred in Shenzhen will not be eligible for registration. Additionally, according to the notice, all vehicles transferred into Shenzhen from other regions must also strictly comply with China VI standards.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.