What is the model of the new Magotan's transmission?

1 Answers
StDawson
07/28/25 3:54pm
Volkswagen Magotan's transmission model is DQ381. Transmission function: It is a mechanism used to change the speed and torque from the engine, capable of fixing or changing the transmission ratio between the output shaft and input shaft in steps. Power specifications: The Volkswagen Magotan has a body size of 4865mm in length, 1832mm in width, and 1471mm in height, with a wheelbase of 2871mm and a fuel tank capacity of 66 liters. It is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110 kW at 5000 to 6000 rpm and a maximum torque of 250 Nm at 1750 to 3000 rpm, paired with a 7-speed dual-clutch transmission.
Was this review help?
1
3
Share
More Forum Discussions

Can green and red coolant be mixed?

It is not recommended to mix green and red coolants as they have different formulations and ingredients, which may cause chemical reactions. Here are the details: 1. Conditions for mixing: Coolants of the same brand and color can be mixed. Different colors indicate different models, so they should not be mixed as this may cause chemical reactions, leading to the coolant becoming ineffective. 2. Hazards of mixing: Due to varying formulations from different manufacturers, there are many different chemical substances involved. Mixing them may cause chemical reactions, resulting in the coolant becoming ineffective or producing harmful components for the vehicle. 3. Components of coolant: The main component is usually propylene glycol, which is colorless. Manufacturers add various colors to prevent mixing and confusion with other vehicle fluids.
10
4
Share

How to Adjust the Carburetor Needle for Fuel Economy?

Carburetor needle adjustment methods are as follows: 1. Float chamber: The fuel level in the float chamber should be adjusted slightly lower. Fuel in the float chamber enters the carburetor throat through the main jet and mixes with air to form a combustible mixture. Appropriately lowering the liquid level reduces pressure difference. 2. Main jet: For fixed main jets, you can wrap one or two thin copper wires inside the jet to reduce fuel flow. For adjustable types, first screw the needle valve all the way in, then rotate it counterclockwise about one and a half turns. The key to properly reducing mixture concentration is maintaining stable engine operation - the vehicle should not experience hesitation during acceleration or carburetor backfire. Multiple adjustments may be needed to reach optimal levels.
12
4
Share

Does the Radiator Need Cleaning?

The radiator needs cleaning. After being used for a period of time, both the exterior and interior of the radiator require cleaning. The car radiator is a key component of the vehicle's cooling system, primarily responsible for dissipating heat to ensure the engine operates at an appropriate temperature. If a dirty radiator is not cleaned, it can affect the cooling and heat dissipation efficiency, causing the engine to operate at high temperatures for extended periods without effective cooling. This can lead to severe failures such as engine seizure, rendering the car inoperable. For the exterior of the car radiator, prolonged use often results in the accumulation of dust, debris, and dirt, which can impair the radiator's cooling performance.
12
5
Share

What time does the morning driving test session start?

It usually starts at 9:00 AM, and the test sequence depends on the appointment order. Relevant information is as follows: 1. Test format: Subject 1 is part of the motor vehicle driver's license examination. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the test content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test is conducted on a computer, with 100 questions, and a passing score is 90 or above. 2. Test duration: Subject 1 allows 45 minutes to answer 100 questions. This means less than half a minute is available to read and answer each question. If you hesitate during the test, the time becomes even tighter.
6
1
Share

How to Match Gears with Speed

The method for matching gears with speed is as follows: 1. First gear: 0 to 15 km/h, used for vehicle starting or uphill climbing, not suitable for prolonged use; 2. Second gear: 15 to 25 km/h, this speed can be used when turning or in certain special weather conditions; 3. Third gear: 25 to 35 km/h, this speed can be used when passing through intersections or on roads with slight inclines; 4. Fourth gear: 35 to 40 km/h, this is the normal driving speed and can be used when there are relatively more vehicles on the road; 5. Fifth gear: above 40 km/h, typically used as the normal driving speed, and the vehicle speed can be increased by pressing the accelerator on well-paved roads.
12
1
Share

What are the three core components of a pure electric vehicle?

The three core components of a pure electric vehicle are the electric motor, battery pack, and electronic control system. Below is more information about these three components: 1. Electric Motor: Pure electric vehicles use an electric motor to replace the traditional diesel/gasoline engine. The drive motor is the 'heart' of the vehicle, powered by the onboard power source to drive the wheels. The motor converts electrical energy from the power source into mechanical energy, which is then transmitted through a drivetrain or directly drives the wheels and working mechanisms. 2. Battery: The battery pack replaces fuel, providing power to the electric motor. 3. Electronic Control System: The electronic control system consists of a battery management system and a control system, managing the battery pack, controlling its energy output, and regulating the motor's speed, among other functions.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.