What is the model of the headlights for the Sylphy?

1 Answers
PrestonDella
07/29/25 11:07am
The headlight models for the Sylphy are: high beam is model HB3, and low beam is model H11. The Sylphy is a new strategic model launched globally by Nissan, featuring innovative design and advanced technology. The power of the Sylphy's high beam bulb is 60W (HB5), and the low beam model is 55W (H11). Car headlights, also known as car front lights or car LED daytime running lights, serve as the eyes of the car. They not only relate to the external image of the car owner but are also closely linked to safe driving at night or under bad weather conditions. When replacing the headlight bulbs for the new Sylphy, first open the engine hood, locate the headlight rear cover at the back of the headlight position, unplug the connector, and unscrew the bulb. Halogen headlights are a semi-enclosed lighting type that uses replaceable headlight (halogen) bulbs. They can be replaced from the engine compartment without removing the entire headlight assembly. It is important to note that high-pressure halogen gas is sealed inside the bulb. If the glass cover is scratched or the bulb is dropped, the bulb may break. When handling the bulb, avoid touching the glass cover.
Was this review help?
14
1
Share
More Forum Discussions

How many points are deducted for crossing the yellow line in Subject 2?

In the Subject 2 driving test, crossing the yellow line during the reverse parking exercise results in an immediate failure, deducting 100 points. The evaluation criteria for each item in the Subject 2 test are as follows: 1. Reverse parking is judged according to the following rules: failure to follow the prescribed route or sequence results in disqualification; the vehicle body crossing the line results in disqualification; failure to complete the reverse parking results in disqualification; stopping midway results in disqualification. 2. Hill start and stop is judged according to the following rules: if the front bumper of the car or the front axle of the motorcycle is not aligned with the pole line and exceeds 1250px front or back, it results in disqualification; exceeding the prescribed time for starting results in disqualification; if the front bumper of the car or the front axle of the motorcycle is not aligned with the pole line but does not exceed 1250px front or back, 10 points are deducted; if the vehicle body is more than 750px away from the road edge line after stopping, 10 points are deducted. 3. Parallel parking is judged according to the following rules: if the vehicle body crosses the line after parking in the space, it results in disqualification; stopping midway results in disqualification; if the tires touch the lane edge line during movement, 10 points are deducted. 4. Curve driving is judged according to the following rules: if the wheels cross the road edge line, it results in disqualification; stopping midway results in disqualification. 5. Right-angle turn is judged according to the following rules: if the wheels cross the road edge line, it results in disqualification; stopping midway results in disqualification.
11
2
Share

Where is the Lingbao BOX new energy vehicle produced?

Lingbao BOX is the first new energy vehicle under the Lingbao brand of Jiangsu Jimai New Energy Vehicle Co., Ltd. It officially entered mass production on April 20th, classified as an A00-class new energy passenger vehicle. The vehicle dimensions are 3460/1475/1615 mm in length/width/height, with a wheelbase of 2455 mm. Its NEDC range is 150 km, and the trunk space can reach up to 1350 liters. Expanded content, Lingbao BOX introduction: 1. Exterior: The Lingbao BOX is positioned as an urban micro electric vehicle, with body dimensions of 3460/1475/1615 mm and a wheelbase of 2455 mm. It features a 5-door, 4-seat layout, compact yet surprisingly spacious, combining convenience and comfort. The body adopts a sculpted streamline design with dynamic aluminum alloy wheels, paired with oval-shaped headlight clusters on both sides and a full-width lower air intake, giving it a cute and playful appearance. The side profile incorporates the currently popular floating roof design, available in four two-tone color combinations: Tianshan White, Soul Crystal Red, Blue and White Porcelain Blue, and Azure Blue, enhancing its overall fashion appeal and adding trendy elements to the classic shape, making it a sportier and more youthful new energy electric vehicle. 2. Interior: The Lingbao BOX features a retro-inspired dashboard design with PU material seats to elevate the overall quality feel. Additionally, to cater to diverse preferences, it offers a black + red personalized color scheme, providing consumers with more choices. The car also comes equipped with a three-spoke multifunction steering wheel, a 9-inch color LCD touchscreen center console, etc., which to some extent enhances its technological and modern appeal.
5
5
Share

What Causes the Speed and RPM Not to Increase When the Accelerator is Fully Pressed?

Car accelerator pedal, intake system, fuel system, ignition system and other failures can all cause the speed and RPM not to increase when the accelerator is fully pressed: Car accelerator pedal failure: If the throttle position sensor is dirty or the voltage is unbalanced, it will cause electronic throttle failure, resulting in the speed not increasing when the accelerator is fully pressed. It is necessary to check the fuel pressure, cleanliness, and replace the fuel filter. Intake system failure: The engine needs sufficient air to work properly. If there is air leakage or blockage in the intake system, the car will experience reduced power, RPM not increasing, and body shaking when accelerating. It is necessary to check the ignition system, cylinder wires, spark plugs, etc.; check the cylinder pressure to see if the engine is missing cylinders; check whether the intake and exhaust pipes are unobstructed (catalytic converter blockage). Fuel system failure: If poor-quality gasoline is used, it can cause the fuel pump to burn out, catalytic converter failure, piston failure, etc., directly affecting the engine power, and easily causing the engine to stall, unable to accelerate, and RPM not increasing. It is necessary to check whether the gasoline quality is poor and replace it with better-quality gasoline in time. Ignition system failure: Ignition high-voltage wires rarely have problems. The main problems are in the ignition coils and spark plugs, as they are consumable parts. When the spark plug performance declines or inferior spark plugs are used, it will cause the car to accelerate weakly, shake when accelerating, and RPM not increasing. It is necessary to replace them with better-quality spark plugs in time.
8
3
Share

How long does it usually take to practice for the B2 subject 2 test?

According to the "Teaching and Examination Syllabus for Motor Vehicle Driver Training", the required training hours for the B2 driver's license subject 2 test are 54 hours. For those taking the large truck driving test (B2), a score of 90 points is required to pass subject 2. The full score for subject 2 is 100 points. For large buses, tractors, city buses, medium-sized buses, and large trucks, a score of 90 points is required to pass, while for other vehicle types, a score of 80 points is sufficient. The 14 items for the B2 driver's license subject 2 test include: hill start, parallel parking, single-plank bridge, curve driving, right-angle turn, passing through a width-limited gate, stake test, narrow road U-turn, simulated highway driving, simulated emergency handling, continuous sharp turns on mountain roads, simulated tunnel driving, and driving in rainy or foggy weather. Below is the detailed sequence of the B2 subject 2 test items: Stake Test: Reverse parking, also known as reversing into a garage, is a key assessment point in the driver's test. It involves maneuvering the vehicle correctly into the garage from both sides while moving, primarily testing the driver's ability to operate the vehicle in a confined space and their spatial awareness when the vehicle is in motion. Parallel Parking: After stopping the vehicle on the right side in front of the parking space, the driver must reverse into the space in one go without stopping midway. The wheels must not touch the lane boundary lines or the parking space boundary lines. Single-Plank Bridge: During the test, the driver must not stop midway, and the wheels must not fall off the bridge. Narrow Road U-turn: The vehicle must stop on the right side of the U-turn section, and the driver must complete the U-turn within no more than three forward and two reverse movements. The test time must not exceed 5 minutes.
13
3
Share

Is it necessary to display the compulsory traffic insurance label on cars in 2021?

In 2021, if electronic insurance policies have been implemented locally, there is no need to display the compulsory traffic insurance label on the vehicle; if electronic policies have not yet been implemented, the compulsory traffic insurance label must be displayed. According to Article 95 of the "Road Traffic Safety Law": If a motor vehicle driven on the road does not display the inspection qualification label or insurance label, or does not carry the vehicle license or driver's license, the traffic management department of the public security organ shall detain the motor vehicle, notify the party to provide the corresponding license, label, or complete the relevant procedures, and may impose penalties in accordance with the provisions of Article 90 of this Law (a warning or a fine of not less than 20 yuan but not more than 200 yuan). Compulsory Traffic Insurance for Vehicles: The full name of compulsory traffic insurance is "Compulsory Liability Insurance for Motor Vehicle Traffic Accidents." It is a compulsory liability insurance where the insurance company compensates for personal injury, death, and property losses of victims (excluding vehicle occupants and the insured) caused by road traffic accidents involving the insured motor vehicle within the liability limit. The premium is based on the nationally unified standard rates. However, the price of compulsory traffic insurance varies for different vehicle types, mainly influenced by the number of car seats. Compared to the more than 20 exemption clauses in commercial third-party liability insurance, compulsory traffic insurance covers a much broader range, including losses caused by intentional actions of the victim, property losses of the insured, related arbitration and litigation costs, and some indirect losses caused by accidents. Moreover, regardless of whether the insured vehicle is at fault in the accident, compulsory traffic insurance will compensate within the liability limit, with no deductible or exemption. Introduction to Electronic Insurance Policies An electronic insurance policy refers to an electronic policy issued by an insurance company using digital signature software that complies with the PKI system and an enterprise digital certificate, bearing the electronic signature of the insurance company. An insurance policy, abbreviated as a policy, is the formal written proof of an insurance contract between the insurer and the insured. The policy must fully record the rights, obligations, and responsibilities of both parties to the insurance contract. The content recorded in the policy serves as the basis for both parties to fulfill the contract. The policy is proof of the establishment of the insurance contract. Advantages of electronic insurance policies: Saves paper resources, eliminating the need to print insurance proof labels; Saves time and is convenient, unrestricted by time or location, with information universally accessible online anytime, quickly and easily; Allows for reissuance and resending, eliminating concerns about loss, and if a paper version is needed offline, it can also be printed or mailed; Facilitates management, as electronic unification makes it easier for insurance companies and traffic police departments to manage the insurance information of various vehicles.
6
0
Share

What is the pulley model number?

The pulley model is divided into 6 major categories, with various specifications available for each type based on required dimensions and load capacity. Function of ABS: Prevents wheel lock-up during emergency braking. During vehicle braking, it automatically controls the braking force to keep wheels from locking, maintaining a rolling-sliding state to ensure maximum tire-road adhesion. Reasons for ABS warning light illumination: ABS wheel speed sensor issues, wiring connection faults, ABS control unit programming problems, ABS master cylinder issues, ABS control unit circuit board failures.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.