What is the model of the front fog lights for the Haval H2?

1 Answers
GraceAnn
07/29/25 6:21pm
Great Wall Haval H2 has two front fog lights, located on the left and right sides of the bumper. The model is P21W21 bayonet-type red bulbs. Function of fog lights: The function of fog lights is to make the vehicle visible to other vehicles in foggy or rainy conditions where visibility is significantly affected by the weather. The rear fog light is the fog light at the rear of the car. For the rear body or doors of sedans with installation positions on the outer surface, bolt-fixed types are used. For sedans where installation is difficult, the rear fog light can be directly fixed near the lower left corner of the rear window glass inside the car, with the visible surface of the rear fog light facing directly backward. H2 high beam model: The high beam model for the Great Wall Haval H2 is H1. As long as the bulb socket is of the H1 specification model, most bulbs can be installed. Different models of bulbs have different interface types and sizes, and the voltage and power must also be consistent. Otherwise, prolonged operation may lead to unforeseen consequences.
Was this review help?
18
2
Share
More Forum Discussions

What to Do When the Engine Malfunction Light Turns Yellow

When the yellow light on the dashboard illuminates during vehicle use, it indicates that the vehicle's engine requires maintenance and servicing. Below is relevant information about the engine malfunction light: 1. Reasons for the Light: The engine malfunction light (referred to as the MIL light) turns on due to a fault in components monitoring vehicle exhaust emissions. The onboard diagnostic system (OBD) detects excessive exhaust emissions, such as issues with the ignition coil, spark plugs, catalytic converter, exhaust valve, fuel injector, intake pressure sensor, oxygen sensor, etc. 2. Consequences of the Light: When the engine malfunction light is on, the engine may operate abnormally. If not addressed promptly, it can lead to problems such as increased combustion chamber temperature and accelerated wear, potentially causing premature engine damage. Additionally, engine noise may increase, affecting driving and passenger comfort. Fuel consumption may also rise, wasting petroleum and financial resources. The engine may start burning oil.
4
4
Share

What is the wading depth of the Honda Civic?

The maximum wading depth of the Honda Civic is 305mm. The wading depth of the Honda Civic is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Honda Civic is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before driving through water, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in water, which could cause severe damage if water enters the engine. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. For roads prone to waterlogging, observe warning water level markers, trees, or reference points such as the wheels and doors of other vehicles to judge the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half of the tire height or the engine's air intake, do not proceed and choose an alternative route.
7
5
Share

Why are Rolls-Royce vehicles issued yellow license plates?

Because some Rolls-Royce models exceed six meters in body length, they are required to display yellow license plates. According to vehicle registration regulations, cars with a body length under six meters and a total weight below 4500kg use blue license plates, while other models use yellow plates. Here is additional information: 1. Not all Rolls-Royce models use yellow plates. Only extended versions with body lengths exceeding six meters, such as the Rolls-Royce Phantom, require yellow plates. Other standard models with body lengths under six meters use blue plates. 2. Besides the Rolls-Royce Phantom, the top-tier Maybach models also use yellow license plates.
15
2
Share

Why Can't the Car Door Be Locked

It is very likely that the remote lock is malfunctioning or factors such as the aging of the car's remote transmitter antenna are causing the remote key to not work. Here is some related information about why the car door cannot be locked: 1. Remote Control Malfunction: If you are using a remote key to lock the door, it is very likely that the remote lock is malfunctioning or factors such as the aging of the car's remote transmitter antenna are causing the remote key to not work. In this case, you can use the spare mechanical key to lock the door. 2. Magnetic Field Interference: Another situation is that there is strong magnetic field signal interference around the car. Since the smart key uses low-intensity radio waves, it cannot function properly under magnetic field interference.
19
5
Share

Does Bumper Touch-Up Require a Full Repaint?

It depends on the extent of the paint damage on the bumper. If the paint is damaged on one end, usually half of the bumper needs to be repainted; if both ends are damaged, a full repaint is required. Compared to a full repaint, partial touch-ups may result in some color difference. Below is relevant information about automotive paint: 1. Function: Automotive paint is a protective film applied to vehicles, a type of coating that helps prevent corrosion of the car body. 2. Precautions: Refer to safety technical data before use; thoroughly stir the paint before use to ensure uniform color; always wear protective gear, including a respirator and work clothes, when applying the paint.
20
0
Share

Where is the Changan Ford Cabin Air Filter Located?

Changan Ford's cabin air filter is located behind the glove compartment on the front passenger side. Below are detailed introductions about the Changan Ford cabin air filter: 1. Specific functions of the cabin air filter: It separates solid impurities such as dust, pollen, and abrasive particles from the air, and adsorbs harmful substances in the cabin air to provide fresh air inside the vehicle. 2. Distinction: The cabin air filter is used to filter the quality of air entering the cabin from inside or outside the vehicle. The engine air filter, on the other hand, refers to the engine intake system, which filters the air entering the engine's intake pipe. These two filters have different functions. Generally, the replacement cycle for the engine air filter is based on air quality and mileage, while the cabin air filter should be replaced once a year or every 20,000 kilometers.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.