What is the model of the Elantra headlight?

1 Answers
DiRosalie
07/29/25 3:40pm
The Hyundai Elantra headlights are divided into high beam and low beam, and their models are different. The low beam model of the Hyundai Elantra is H7, and the high beam model is H11. The Elantra comes standard with halogen headlights, and the light control switch is located on the combination switch lever on the left rear side of the steering wheel. The car bulb models are as follows: 1. H1 is a single-filament, single-pin type, mostly used for high beams. 2. H7 is a single-filament, double-pin type, mostly used for low beams. H1 and H7 are also used for some fog lights. 3. H3 is a special type, generally used in Japanese cars and rarely in other vehicles. 4. H4 is a dual-filament, three-pin bulb where both low and high beams are in one bulb, with standard specifications of 55W for low beam and 60W for high beam; or 90W for low beam and 100W for high beam.
Was this review help?
20
4
Share
More Forum Discussions

How to use the tire pressure monitoring in Tiguan L?

The method to use the tire pressure monitoring in Tiguan L is: 1. Inflate all four tires to the standard pressure; 2. Start the engine; 3. Press and hold the set button until a sound is heard, indicating the tire pressure has been saved. Taking the 2020 Tiguan L as an example, it belongs to the mid-size SUV category, with body dimensions of: length 4712mm, width 1839mm, height 1673mm, wheelbase 2791mm, and a fuel tank capacity of 60L. The 2020 Tiguan L is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
7
3
Share

How often should the Toyota Yaris be serviced?

Toyota Yaris should be serviced every 5,000 kilometers or 3 months. The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life. For the Toyota Yaris, the engine oil and oil filter should be replaced every 5,000 kilometers, the air filter and cabin air filter every 15,000 kilometers, the fuel filter every 25,000 kilometers, and the transmission fluid and coolant every 40,000 kilometers. The Toyota Yaris has a length of 4160mm, width of 1700mm, height of 1495mm, wheelbase of 2550mm, front track of 1460mm, and rear track of 1460mm. The engine equipped in this car has a maximum horsepower of 112Ps, maximum power of 82kW, and maximum torque of 139Nm.
16
3
Share

What are the steps for temporary roadside parking?

The steps for temporary roadside parking are: turn on the right turn signal, observe the interior rearview mirror, slow down, observe the right side mirror, pull over, park safely, and turn on the hazard warning lights. The sequence for manual transmission parking is: 1. Turn on the right or left turn signal; 2. Gently press the brake to reduce speed, observe the right side mirror, and drive to the right; 3. When the speed is relatively low, press the clutch pedal, and pay attention to the surrounding distance when parking; 4. After the car is stationary, shift to neutral, turn off the turn signal, engage the handbrake, and turn off the engine. Precautions for manual transmission parking: 1. Practice pressing the clutch pedal and release it slowly; 2. Master the coordination between the accelerator and clutch, and avoid releasing the clutch quickly; 3. Master the timing of gear shifting, shift in order without skipping gears; 4. Learn to press the accelerator evenly for smooth acceleration.
3
4
Share

What are the hidden functions of the Haval H6 remote control?

Haval H6 remote control hidden functions include: 1. Locking; Press the "Lock" button, all door lock motors perform a locking action simultaneously, and the turn signal flashes once. 2. Vehicle Locator; When the vehicle is in anti-theft mode, pressing the "Vehicle Locator" button activates the vehicle locator function once. 3. Alarm Deactivation; When the vehicle is in the alarm activation state of anti-theft mode, pressing the "Lock" button will make all door lock motors perform a locking action simultaneously, regardless of whether the doors are unlocked, and deactivate the alarm. 4. Unlocking; Press the "Unlock" button, all doors perform an unlocking action simultaneously, and the turn signal flashes twice. If the vehicle is in anti-theft mode when this button is pressed to unlock, the turn signal will flash three times. 5. Trunk Opening; Hold the button for more than 3 seconds until a click sound is heard, the trunk will unlock, and all vehicle doors will also unlock. After closing the trunk, the doors will automatically lock.
12
0
Share

What is the process for selecting a license plate number when buying a car?

Process for selecting a license plate number when buying a car: 1. Visit the official vehicle management office's license plate number self-selection website, enter the vehicle owner's information such as the VIN (Vehicle Identification Number) and name. Be careful not to make mistakes with important details like the VIN, ID number, or name. 2. After entering the verification code, proceed to the next step. Input the vehicle owner's contact information, including mobile phone number, address, and postal code, then enter the number selection interface to try out potential numbers. 3. Once a suitable number is found, enter the verification code to confirm the pre-selected number. There are two scenarios for selecting a license plate number at the vehicle management office: The first involves randomly generating 10 groups of numbers, with 10 numbers in each group, totaling 100 numbers within a specific range. After selection, you can proceed to collect the license plate. The second option allows the owner to customize their own number, where the vehicle management office fixes two digits, and the owner can only choose the remaining three digits.
7
1
Share

What are the main failure modes of enclosed soft-surface gear transmission?

The main failure modes of enclosed soft-surface gear transmission are: 1. Tooth breakage; 2. Tooth surface wear; 3. Tooth surface pitting; 4. Tooth surface scuffing; 5. Plastic deformation. Based on whether the transmission ratio of gear transmission is constant, it can be divided into variable transmission ratio gear transmission and fixed transmission ratio gear transmission. In variable transmission ratio gear transmission mechanisms, the gears are generally non-circular and are mainly used in machinery with special requirements. In fixed transmission ratio gear transmission mechanisms, the gears are all circular. Based on tooth surface hardness, it can be divided into soft-surface gear transmission and hard-surface gear transmission. Based on whether the driven gear's rotation axis is parallel, it can be divided into planar gear transmission and spatial gear transmission.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.