What is the model of the Baojun 360 headlights?

2 Answers
KevinFitz
07/25/25 2:42pm
Baojun 360 headlight model is 9005, with an integrated high and low beam mode. Below are specific details about the headlight model: 1. Common car headlight models include H1, H3, H4, H7, H11, etc. 2. Among current common vehicle models, H3 and H11 are mostly used for fog lights, while H4 is often found in Korean and Japanese cars where the high and low beams are in the same bulb. 3. Before replacing car bulbs, avoid touching the glass surface of the bulb with bare hands to prevent fingerprints from contaminating the glass shell and shortening the bulb's lifespan. After replacing the bulb, the headlights should be adjusted to avoid glare.
Was this review help?
19
4
Share
MacRafael
08/11/25 9:10pm
I've been driving the Baojun 360 for three to four years, and the matter of headlight models depends on how you look at it. Its halogen headlights typically use an H4 dual-filament bulb, which handles both high and low beams, but the exact configuration may vary by model year and trim. For example, some versions like the 2018 model might be equipped with H1 high beams and H7 low beams. To confirm, the simplest way is to check the owner's manual—it lists everything clearly. When replacing bulbs yourself, don't forget to test the power supply voltage to avoid burning out the new bulb. Also, pay attention to bulb cleanliness while driving, as dust buildup can affect brightness—just wipe the lens weekly. Bulb lifespan is generally around 500 hours, so it's advisable to inspect them every two years to avoid being left in the dark during night drives. If you're unsure about the model, take a photo of the old bulb and compare it at an auto parts store—it saves both hassle and money.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

What does ALRBAG mean?

ALRBAG refers to the airbag, which is an inflatable cushion installed in vehicles. It deploys instantly during a collision to provide cushioning and protect the safety of the driver and passengers. Working principle of airbags: When a vehicle is involved in a collision while driving, the airbag sensor first receives the impact signal. If the impact reaches a specified intensity, the sensor activates and sends a signal to the electronic control unit. Upon receiving the signal, the electronic control unit compares it with stored data. If the conditions for airbag deployment are met, the drive circuit sends an activation signal to the gas generator in the airbag module. The gas generator then ignites the gas-producing agent, generating a large volume of gas. This gas is filtered and cooled before entering the airbag, causing it to rapidly inflate and break through the cover within milliseconds. The airbag forms an elastic cushion in front of the driver or passengers, then deflates and contracts to absorb impact energy, effectively protecting the head and chest from or reducing the severity of injuries. Airbag deployment conditions: The vehicle must meet a certain speed threshold, typically above 30 km/h or 60 km/h, with variations depending on the manufacturer; the impact location must be correct, usually the front of the vehicle or the wheel arch area, within the range detectable by the airbag sensors; and the impacted object must be hard and forceful, such as another vehicle or a wall. The airbag system is a protective mechanism that activates only when the vehicle experiences a severe impact.
15
0
Share

Do you pay for the driving school exam fees yourself?

Driving school exam fees are not paid by yourself. Detailed explanation: The motor vehicle driver's license examination fees are paid by the driving school. If you fail the first exam, the retake fees for subsequent attempts are paid by yourself. It's also important to note that there are limits on the number of retakes for the driver's license related subjects: Subject 1 and Subject 2 each have only five attempts. Relevant knowledge about motor vehicle driver's license: The motor vehicle driver's license has an examination validity period, which is three years after completing the Subject 1 exam. As long as you complete all the driver's license exams within these three years, you can obtain the motor vehicle driver's license and drive legally. If this time limit is exceeded, all previously passed exam subjects will be canceled, and you cannot continue the examination process.
2
4
Share

Does Grinding Gears 10 Times Affect a New Car?

Whether gear grinding affects the transmission is not determined by the number of occurrences but by the severity of the grinding. If the grinding is very severe, it may cause immediate damage. However, if it's only slight, there is generally no issue. Occasional gear grinding in a new car does not significantly harm the transmission, but if it becomes a long-term bad driving habit, the damage to the transmission will increase. Impact of Gear Grinding on the Transmission: Gear grinding can lead to severe transmission damage, requiring repairs over time. Since gears are made of metal, friction between them causes wear. Over time and with frequent occurrences, the edges of the gears wear down, reducing their ability to engage properly, which can result in the gear slipping under vibration. Manual transmissions' reverse gears lack synchronizers, so shifting into reverse without fully depressing the clutch or before the car has completely stopped can easily damage the reverse gear. If the reverse gear is damaged and not repaired promptly, debris may cause further damage to other gears or bearings, leading to abnormal noises in all gears and, in severe cases, transmission failure. How to Prevent Gear Grinding: The best way to prevent gear grinding is to ensure the car is completely stopped before shifting into reverse. Additionally, always fully depress the clutch—never halfway—as this can cause severe reverse gear grinding. If the clutch is not fully depressed, even the best synchronizers cannot handle the significant speed difference, accelerating synchronizer wear exponentially.
1
0
Share

What Does It Mean When the Center Brake Light Is On?

The center brake light being on is an alarm triggered when the high-mounted brake light is not functioning. There are several specific reasons why the brake light may stay on. Brake Switch Damage: This usually occurs when there is poor contact between the brake pedal and the brake sensor switch, or the sensor switch itself is damaged. Brake Pad Wear or Aging: Worn or aged brake pads can also cause the brake light to stay on. It is necessary to check the thickness of the brake pads. If the thickness is below the specified value, generally 0.8cm, there is a high risk of the pads cracking during driving, which can be dangerous. Low Brake Fluid: Insufficient brake fluid is often accompanied by noticeably reduced braking power, and in severe cases, a complete loss of braking power may occur. This issue can be resolved by promptly replenishing the brake fluid. Low brake fluid levels cause the brake pedal to sink, keeping the brake switch continuously powered, which results in the brake light staying on.
20
3
Share

What Are the Standards for Vehicle Classification?

Automobile classification standards include those based on Mainland China standards and European classifications. The specific classifications are as follows: According to Mainland China standards: Mini cars (displacement below 1L), subcompact cars (displacement 1.0~1.6L), compact cars (displacement 1.6~2.5L), mid-size cars (displacement 2.5~4.0L), and full-size cars (displacement above 4L). According to European classifications: Passenger cars are divided into A00 class (micro cars), A0 class (small cars), A class (compact cars), B class (mid-size cars), C class (large cars), and D class (luxury cars). ABCD class cars refer to: A class cars are compact cars with a wheelbase between 2500 and 2700mm; B class cars are mid-size cars with a wheelbase between 2700 and 2900mm; C class cars are large cars with a wheelbase between 2800 and 3000mm; D class cars are full-size cars with a wheelbase above 3000mm.
6
1
Share

Is a tire pressure of 3.0 bar normal in summer?

Summer tire pressure of 3.0 bar is not normal. If the tire pressure is 3.0 bar when the car is cold, it is somewhat abnormal, as this pressure is a bit too high. Generally, a cold tire pressure of around 2.5 bar is considered normal. Hazards of excessive tire pressure: The friction and adhesion of the tires will decrease, affecting braking performance; It can cause steering wheel vibration and deviation, reducing driving comfort; It accelerates wear on the central tread pattern of the tire, shortening its lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Causes excessive stretching and deformation of the tire cords, reducing tire elasticity and increasing the load on the car while driving; Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, the tire is more prone to punctures, and impacts can lead to internal cracks or blowouts, resulting in a tire burst.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.