What is the model of Audi manual transmission?

2 Answers
OJayla
09/01/25 3:36am
Audi manual transmission model is CVT continuously variable transmission. Transmission oil replacement time: It is best to replace it once after 17,000 kilometers. Because the manual transmission oil will not cause discomfort when it exceeds 17,000 kilometers, but this is a critical point. The role of transmission oil: The transmission generates a lot of heat during operation, and the transmission oil will play a cooling role. In daily driving, gears must be changed according to driving conditions, and the transmission oil needs to be lubricated to make shifting smoother. Keep the transmission system clean and prolong the life of the transmission.
Was this review help?
5
2
Share
SanMary
09/13/25 6:28am
I've spent a considerable amount of time dealing with Audi manual transmission issues. Common models mainly include the MQ series, such as the MQ200 used in small-displacement turbocharged engine models like the 1.4T version of the A3. This transmission is designed for durability but often feels stiff during gear shifts. The MQ250 is a mainstream choice, installed in many 2.0T A4 and A5 models, capable of handling 250 Nm of torque with smooth shifting, though it requires regular clutch plate maintenance to prevent wear. The more high-end MQ350 supports higher power output, suitable for V6 engines in the A6 or older S4 models, delivering better acceleration. There are also historical models like the 016 series used in 1990s A4s. These model variations impact driving experience and used car value. While manual transmissions are fuel-efficient, modern Audis tend to favor automatic transmissions. Understanding these models is highly beneficial for car selection or repairs, especially when inspecting used vehicles where attention to drivetrain condition is crucial.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

How to Open the CRV Hood?

Switch is located under the dashboard on the driver's side, to the right of the fuel tank switch. Pull it upward, then press the hood latch at the front of the vehicle and lift the hood to open it. Below is relevant information about the front hood (i.e., engine hood): 1. Pay attention to the force when closing the engine hood; avoid using excessive force. 2. The engine hood can effectively block damage caused by explosions, providing protective functions. 3. Engine hoods are typically made of rubber foam and aluminum foil materials, which reduce engine noise while isolating heat generated during engine operation, effectively protecting the paint surface on the hood and preventing aging.
14
3
Share

How many kilometers does the Magotan spark plug need to be replaced?

Magotan spark plugs need to be replaced every 30,000 to 40,000 kilometers. It is recommended to replace spark plugs regularly during daily use, as they are a wearable part that requires periodic replacement. Spark plugs, commonly known as spark electrodes, function by discharging the high-voltage pulse electricity sent from the high-voltage wire, breaking down the air between the two electrodes to generate an electric spark, thereby igniting the mixed gas in the cylinder. In terms of dimensions, the Magotan has a body length, width, and height of 4866mm, 1832mm, and 1464mm respectively, with a wheelbase of 2812mm. From the front view, the overall design of the Magotan resembles the X-shape of the Phaeton, with large-area chrome decorations and the use of dual horizontal lines, showcasing a noble and extraordinary kingly temperament.
16
0
Share

What is the engine model of the Bora?

The engine model of the Bora is the EA211, a new engine under the Volkswagen Group. Below are relevant details about the Bora: 1. The Volkswagen Bora comes in both 1.5L and 1.4TSI models, each paired with different engines. 2. The 1.5L model's engine has a maximum horsepower of 116Ps, a maximum power output of 85kW at 6000rpm, and a maximum torque of 150N·m at 4000rpm. 3. The 1.4TSI model's engine delivers a maximum horsepower of 150Ps, a maximum power output of 110kW at 5000-6000rpm, and a maximum torque of 250N·m at 1750-3000rpm.
18
2
Share

Which manufacturer produces the SWM G01?

SWM G01 is produced in Chongqing. The SWM G01 was designed by the R&D team at SWM Motors' design center in Milan, Italy, and is built on the all-new G platform. Below are some details about the SWM G01: 1. The SWM G01 has a body length of 4610mm, a width of 1855mm, a height of 1720mm, and a wheelbase of 2750mm. 2. The SWM G01 is equipped with a DG15T 1.5T turbocharged engine, delivering a maximum power of 156 horsepower (115 kW) and a peak torque of 230 N·m. In terms of transmission, it is paired with either a 6-speed manual or a 6-speed automatic transmission, which includes a sport mode.
14
3
Share

What Maintenance Does a Car Need After Running 30,000 Kilometers?

After running 30,000 kilometers, a car requires both basic and advanced maintenance. Basic maintenance includes: changing the engine oil, oil filter, air filter, cabin air filter, and fuel filter. Advanced maintenance includes: changing the brake fluid, power steering fluid, and coolant. The replacement intervals for each item are as follows: 1. Cabin air filter: 10,000 kilometers. 2. Fuel filter (internal/external): Internal: 40,000-60,000 kilometers; External: 20,000 kilometers. 3. Brake fluid: Within 2 years or 40,000 kilometers. 4. Power steering fluid: Approximately 2 years or 30,000 kilometers. 5. Coolant: 2 years.
12
1
Share

Is the Mazda Atenza Rear-Wheel Drive or Front-Wheel Drive?

Mazda Atenza is front-wheel drive, also known as FWD, which refers to a car design where the engine only drives the front pair of wheels in terms of power distribution. The Mazda Atenza is equipped with two engines: a 2.0-liter naturally aspirated engine and a 2.5-liter naturally aspirated engine, both featuring Mazda's Skyactiv technology. In terms of exterior design, the Atenza adopts Mazda's new "KODO - Soul of Motion" design language, featuring a U-shaped front grille and LED headlights. The headlight assembly includes LED daytime running lights. Regarding body dimensions, the Atenza measures 4870mm in length, 1840mm in width, and 1450mm in height, with a wheelbase of 2830mm.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.