What is the model number of the original spark plug for the Sylphy?

1 Answers
LaTravis
07/30/25 8:49am
The Sylphy uses NGK spark plugs, model LZKAR6AP-11. Under normal maintenance conditions, spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's recommended to follow the user manual. The following standards can be referenced for maintenance replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure everything is cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires according to the firing order, then secure the cover.
Was this review help?
14
5
Share
More Forum Discussions

What maintenance is required at 100,000 kilometers?

When a vehicle reaches 100,000 kilometers, a major maintenance service is required. The major maintenance includes the following: 1. Replacement of engine oil and the three filters. 2. Replacement of transmission fluid, brake fluid, power steering fluid, and coolant. Additionally, components such as spark plugs and belts should be inspected and replaced if necessary. The vehicle's tires and brake pads also need to be checked. 3. Finally, a four-wheel alignment should be performed to check if the chassis data has changed, with adjustments made if needed. Other tasks include a full vehicle inspection, which are routine items, and cleaning the engine's carbon deposits. Regular maintenance generally includes the following: 1. Routine maintenance, typically performed every 5,000 KM (or 7,500 KM for some models), primarily involves changing the engine oil and oil filter, and inspecting the fuel filter (many vehicles no longer have one) and air filter. If they are dirty, they should be replaced. Additionally, it is essential to check the brake discs and pads for replacement needs, top up brake fluid if necessary, and inspect tire conditions for safety. 2. Periodic maintenance, usually done every 3 years or 40,000 KM, includes cleaning the fuel injectors, throttle body, and the vehicle's intake system, in addition to routine maintenance. It also involves replacing transmission fluid, front and rear axle fluids, coolant, and brake fluid. Tire wear should be checked, with replacements made if necessary. 3. Major maintenance. This typically occurs after the vehicle has driven 100,000 KM and involves a comprehensive inspection of the vehicle and replacement of parts as needed. At this stage, the wiring (electrical circuits) and transmission components should be inspected.
2
5
Share

What does the expiration date of motor vehicle inspection mean?

The expiration date of motor vehicle inspection refers to the validity period of the vehicle's annual inspection. If a motor vehicle's annual inspection is overdue, it means the inspection was not conducted by the due date, and the previous year's inspection validity has expired. Failure to conduct the inspection on time indicates that the vehicle has not undergone the required annual or biennial qualified inspection. For example, if the validity period is until October 2019, it means the motor vehicle inspection is valid until the end of October 2019, and the inspection should be completed on schedule. Vehicles without a valid inspection are not allowed to drive on public roads, and driving without inspection may result in penalties. The owner of the motor vehicle can apply for an inspection compliance mark at the vehicle registration office up to three months before the expiration of the inspection validity period. Before applying, the owner must resolve all traffic violations and accidents related to the vehicle. When applying, the owner must fill out an application form and submit the vehicle's registration certificate, compulsory traffic accident liability insurance certificate, vehicle and vessel tax payment or exemption certificate, and motor vehicle safety technical inspection compliance certificate.
7
2
Share

Is the Audi Q7 only available as an imported model?

The Audi Q7 is only available as an imported model. The Audi Q7 is a mid-to-large-sized SUV launched by Audi, with body dimensions of 5069mm in length, 1968mm in width, and 1716mm in height, and a wheelbase of 3001mm. Here is more information about the Audi Q7: 1. Model and Suspension: The Audi Q7 is a mid-to-large-sized 5-door, 7-seat SUV with a front-engine, four-wheel-drive layout, and both front and rear suspensions use multi-link independent suspension. 2. Powertrain: The Audi Q7 is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 180 kW at 5000 to 6500 rpm and a maximum torque of 370 Nm at 1600 to 4300 rpm.
8
2
Share

Why Can't a Diesel Vehicle Accelerate or Pick Up Speed?

Diesel vehicle unable to accelerate or pick up speed may be caused by: clogged filters, blocked fuel injectors, high-pressure fuel pump pressure loss, or clogged air filters. Regardless of the cause, professional tools are required for repairs, so it is recommended that owners take their vehicle to a professional auto repair shop or 4S dealership for inspection and repair, rather than attempting to fix it themselves. Below are detailed explanations: Clogged Filters: If the diesel filter is too dirty or clogged, insufficient fuel supply can cause the vehicle to be unable to accelerate or pick up speed, necessitating replacement of the diesel filter. Blocked Fuel Injectors: Blocked fuel injectors lead to insufficient fuel intake, preventing the vehicle from accelerating or picking up speed. Cleaning or replacing the fuel injectors is required. High-Pressure Fuel Pump Pressure Loss: Pressure loss in the high-pressure fuel pump results in low fuel pressure, making it impossible to accelerate or pick up speed. Repair and calibration of the high-pressure fuel pump are necessary. Clogged Air Filters: If the air filter is too dirty or clogged, insufficient air intake leads to poor combustion, preventing the vehicle from accelerating or picking up speed. Replacement of the air filter is required.
7
5
Share

Does idling with the AC on after starting the car have any impact?

Idling with the AC on after starting the car does have an impact. Running the AC while idling not only harms the vehicle, consumes more fuel, hurts your wallet, and affects your health, but also contributes to increased air pollution. Keeping the AC on for an entire day can easily lead to carbon monoxide poisoning. If you leave the AC on while parked, the engine operates only at idle speed, leading to incomplete combustion of gasoline. This incomplete combustion produces toxic substances such as carbon monoxide. If the car windows and doors remain tightly closed for an extended period under these conditions, exhaust fumes can enter the enclosed cabin. Once these fumes accumulate to a certain level, they can cause carbon monoxide poisoning. Precautions for using the car AC: After the car has been exposed to the sun, first turn on the external circulation to ventilate and dissipate heat. You can also open the windows and sunroof to speed up the cooling process. After 3-5 minutes, when the interior temperature has stabilized, close the windows, turn on the cooling system, and switch the AC to internal circulation. In cold weather, wait a moment after getting in the car until the engine reaches normal operating temperature. Then, turning on the heater with internal circulation can quickly raise the temperature.
9
4
Share

What does an engine displacement of 1598ml mean?

An engine displacement of 1598ml refers to an engine displacement of 1.598L. Displacement is a relatively important structural parameter that comprehensively measures the size of an engine. The performance indicators of an engine are closely related to its displacement. Generally, the larger the displacement of a car, the higher its power output. Unit displacement is commonly used as a basis for evaluating the size of different engines. Introduction to engine displacement: Engine displacement is one of the most important structural parameters. It represents the size of an engine more accurately than cylinder bore and number of cylinders. Many performance indicators of an engine are closely related to its displacement. Generally, a larger displacement means the engine releases more energy per unit time, indicating better power performance. Engine maintenance methods: Regular oil changes: The engine oil must match the vehicle model. Regular coolant replacement: Coolant plays a role in cooling the engine. Clean the fuel system: The fuel system generates impurities and requires moderate cleaning. Replace the oil filter: It acts as a filter. When there are impurities in the oil, this filter can effectively remove them, preventing particles from entering the engine. Clean it when dirty and replace it if damaged, which helps extend the engine's lifespan. Develop good driving habits.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.