What is the model number of the manual transmission oil for the new Jetta?

What Causes the Rattling Sound Inside the Steering Wheel When Driving on Rough Roads?

The rattling sound inside the steering wheel when driving on rough roads can be caused by: 1. Insufficient lubrication in the steering column, leading to increased friction; 2. Low level of power steering fluid; 3. Issues with the universal joint; 4. Aging and hardening of the rubber bushings in the suspension stabilizer bar links; 5. Damage to the thrust bearing. The steering wheel is a round device used to control the direction of cars, ships, and airplanes. It is typically connected to the steering shaft via splines and functions to convert the force applied by the driver on the wheel's edge into torque, which is then transmitted to the steering shaft. It mainly consists of a frame, foam padding, and mounting clips or screw holes for the driver's airbag (DAB).

7

1

Share

What to Do When the Sylphy Start-Stop System Fails?

Sylphy start-stop system failure solution is: immediately turn off the engine, disconnect the positive battery terminal, wait for 5 minutes before reconnecting, insert the key and turn it to 'on', then remove the key after the dashboard indicator lights up for 30 seconds. The engine automatic start-stop system is a set of mechanisms that automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts it when needed to proceed. Taking the Sylphy 2021 Classic 1.6XE Manual Comfort Edition as an example: its manufacturer is Dongfeng Nissan, classified as a compact car, with a gasoline energy type, dimensions of 4631mm in length, 1760mm in width, and 1503mm in height, and a wheelbase of 2700mm.

20

1

Share

How to reset the maintenance light on Peugeot 4008?

Dongfeng Peugeot 4008 maintenance light reset steps: 1. Turn off the ignition switch of Peugeot 4008. 2. Press and hold the "000" trip reset button. 3. Turn on the ignition switch, at this time the odometer will start counting down. 4. When the display shows "Initialization completed" or "=0", it means the maintenance indicator light has been successfully reset. 5. Release the button, and the wrench symbol (maintenance indicator light) will disappear. The functions of the maintenance light are: 1. More directly records the mileage used 2. Timely reminds the owner that their vehicle needs maintenance. So when the maintenance light on the dashboard lights up, it indicates that your vehicle is due for maintenance and you should visit an authorized Peugeot service center as soon as possible.

11

5

Share

How Many Chances Are There for the Subject 3 Theory Test?

There are 5 chances for the Subject 3 theory test. Below is a detailed introduction to the driver's license test: 1. Subjects: The test is conducted in the order of Subject 1, Subject 2, Subject 3, and Subject 4. 2. Retake: For the driving test, Subjects 2 and 3 can only be taken five times each. If you fail, you will need to pay the tuition and practice fees again. According to the Ministry of Public Security's Order No. 123 and 124, if you fail the fifth scheduled test for the road driving skills test of Subjects 2 and 3, all previously passed subjects will be invalidated. If you still want to obtain a driver's license, you will have to re-register and pay the tuition fees to the driving school.

18

1

Share

Is the Wuhan Ring Expressway restricted during the Military World Games?

There are no restrictions on the Wuhan Ring Expressway during the Military World Games. Non-local transit vehicles can pass through the Wuhan Ring Expressway but are not allowed to enter the area inside the expressway. They should follow the detour signs. Below are the vehicles prohibited in Wuhan during the Military World Games: 1. Within the administrative area of Wuhan: Transport vehicles carrying highly toxic hazardous chemicals are prohibited at all times; other hazardous chemical transport vehicles are prohibited from 7:00 to 22:00 daily; trucks are prohibited at all times within the area inside the Third Ring Road (including the Third Ring Road) and other designated roads. 2. Within the area inside the G4201 Wuhan Ring Expressway (excluding the expressway itself): Non-local vehicles are prohibited at all times, except for non-local long-distance buses and non-local tourist buses.

15

0

Share

How to Solve Oil Leakage from Engine External Sealant?

Engine external sealant oil leakage can be addressed by the following methods: 1. For minor leakage, promptly check the engine oil level. If the oil level is slightly low, simply top it up to between the min and max marks; 2. For oil seal leakage or gasket leaks, disassemble and replace the affected parts or apply heat-resistant sealant; 3. Add a rubber plasticizer-enhancing solute to the engine oil, which can improve the leakage condition after normal driving for a period. The car engine is the power-generating device of a vehicle, serving as its heart, and determines the car's power, fuel efficiency, stability, and environmental performance. Depending on the power source, car engines can be classified into diesel engines, gasoline engines, electric motors for electric vehicles, and hybrid engines.

4

5

Share

What is the model number of the manual transmission oil for the new Jetta?

What Causes the Rattling Sound Inside the Steering Wheel When Driving on Rough Roads?

What to Do When the Sylphy Start-Stop System Fails?

How to reset the maintenance light on Peugeot 4008?

How Many Chances Are There for the Subject 3 Theory Test?

Is the Wuhan Ring Expressway restricted during the Military World Games?

How to Solve Oil Leakage from Engine External Sealant?

Can a C1 license drive an 8-seater vehicle?

How to Set the Dashboard Theme on the BYD Han?

What does D/S gear mean?

What Causes Black Smoke and Insufficient Power in Diesel Vehicles?