What is the model number of the Excelle GT's brake light?

1 Answers
PenelopeMarie
07/29/25 2:19pm
The model number of the Excelle GT's brake light is T10, and there are two brake lights and one high-mounted brake light. Here is a partial introduction to the vehicle: 1. The Excelle GT is a high-end mid-size car with body dimensions of 4587mm in length, 1798mm in width, and 1463mm in height, and a wheelbase of 2640mm. 2. In terms of power, the Excelle GT is equipped with a 2.0T turbocharged engine with a maximum power of 250 horsepower and a peak torque of 260 Nm, paired with a 6-speed manual transmission. 3. In terms of appearance, the front face of the Excelle GT does not differ much except for the eagle-eye headlights being replaced with a slightly more rounded style, but when viewed from the rear, the overall image resembles a scaled-down version of the new LaCrosse.
Was this review help?
3
5
Share
More Forum Discussions

How to reset the tire pressure warning light on the Ford Edge?

Methods to reset the tire pressure warning light on the Ford Edge: 1. Drive slowly to a safe location, stop the vehicle, turn off the engine, wait for 1 to 2 minutes, then restart the vehicle. After the vehicle stabilizes, check the tire pressure values displayed on the dashboard; 2. Both underinflation and overinflation can trigger the tire pressure warning light. Drive slowly to an auto repair shop to adjust the tire pressure, or use a personal inflation device to adjust it on the spot if available; 3. If the warning light remains on after adjustment, manual reset is required. Locate the settings button on the vehicle's center console, usually labeled SET, to reset the tire pressure; 4. If the vehicle does not support manual operation, ensure the tire pressure is correct and have a technician use a specialized diagnostic tool to clear the fault code.
5
5
Share

What Are the Hazards of Slamming Car Doors?

Slamming car doors can cause the following hazards: 1. Frequently slamming car doors can easily affect the hinges and fasteners connecting the door to the car body, and other components may also become loose or damaged; 2. Slamming car doors not only damages the car but also affects the passengers inside. The airflow caused by forcefully closing the door can impact the air pressure in the sealed space, leading to ear pain for the driver and passengers. The correct way to close a car door: After getting out of the car, use your hand to close the door partially. When the door is about 20 centimeters away from the car body, apply appropriate force to close it. This method avoids loud noises and minimizes wear and tear on the vehicle.
8
0
Share

What kind of engine oil should be used for the Highlander 2.0T?

The Highlander 2.0T uses Toyota's specialized 0W20 engine oil or other major brands' 0W20 engine oil. If you frequently drive on highways or engage in aggressive driving, you should use 0W30 engine oil. The Highlander is a vehicle produced by Toyota, a large-sized SUV in the Toyota family. The dimensions of the 2018 Highlander 2.0T 2WD Elite Edition are 4890mm in length, 1925mm in width, and 1720mm in height, with a wheelbase of 2790mm. The front track is 1635mm, and the rear track is 1630mm. It features a MacPherson front suspension and a double-wishbone rear suspension.
5
2
Share

Does the Focus have an engine guard?

Ford Focus comes with a resin engine guard as standard equipment from the factory. While it offers limited protection, it is sufficient for daily urban road use. If owners are concerned or frequently drive on rural dirt roads, they can upgrade to stainless steel or aluminum alloy guards for enhanced protection. The engine guard primarily protects the engine and transmission. There are pros and cons to installation: while it provides better protection for the engine and transmission, it may interfere with the engine's protective downward displacement during severe frontal collisions. This issue mainly depends on the driving conditions most frequently encountered.
19
1
Share

What Causes Car Brake Noise?

The reason for car brake noise is a problem in the brake system. Worn brake pads become very thin, causing the brake drum to directly contact the vehicle, resulting in noise from metal friction. If the brake pads are too thin, a warning indicator light should illuminate. If the wear hasn't reached the set limit, the light may sometimes not come on. If the brake pads are found to be fine upon inspection, the car can be driven normally. If the car is new, because both the brake pads and brake discs are brand new, they are in the break-in period, which can cause unusual noises while driving. If the noise is due to this reason, the owner need not worry, as the noise will automatically disappear after the car completes the break-in period.
6
4
Share

How to Drive a New Energy Vehicle?

Steps to drive a new energy vehicle: 1. Fasten your seatbelt before starting, press the brake and release the handbrake, then press the car start button to change its color to green and light up the dashboard; 2. Check the surrounding environment, and after confirming safety, shift the gear from N to D; 3. Slowly release the brake to start the car, then press the accelerator to drive normally. When parking, it is important to first press the brake, then shift the gear to N (neutral), pull up the handbrake, turn off the engine and wait for the start button to dim, and finally lock the car when getting off. The core power of new energy vehicle models consists only of the motor and battery, with a relatively simple structure and low technical barriers, so there are relatively more models available and they are easier to drive.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.