What is the model and brand of the tires on the Skoda Karoq?

1 Answers
AugustAnn
07/29/25 8:04pm
The Karoq comes with Dunlop tires as standard, with the flagship version equipped with 18-inch tires in the specification 215/50/R18. Below is a classification of car tires: Tire classification by vehicle type: Tires can be broadly categorized into 8 types based on vehicle classification. These are PC—Passenger Car tires, LT—Light Truck tires, TB—Truck and Bus tires, AG—Agricultural Vehicle tires, OTR—Off-The-Road tires, ID—Industrial Vehicle tires, AC—Aircraft tires, and MC—Motorcycle tires. Tire classification by usage: Tires can be classified by usage, including categories such as load-bearing tires, passenger vehicle tires, and mining tires. Load-bearing tires must not only indicate the size specifications on the sidewall but also the ply rating. However, the ply rating of load-bearing tires does not refer to the actual number of layers but rather to the load-bearing performance of tires made with high-strength material cords, which is equivalent to the number of layers in tires made with cotton cord.
Was this review help?
9
0
Share
More Forum Discussions

Is a Car with Cut Rear Fender Considered an Accident Vehicle?

A car with a cut and replaced rear fender is considered a major accident vehicle. If the rear fender has undergone cutting and replacement, it falls under the category of an accident vehicle. However, if it only underwent panel beating repairs without any cutting or welding, it is not classified as an accident vehicle. Introduction to Accident Vehicles: An accident vehicle refers to a car that has suffered damage due to non-natural wear and tear, leading to a decline in mechanical performance and economic value. Generally, these are vehicles with structural damage, where the performance is inferior to its original state. An accident inherently indicates issues with the car, and driving such a vehicle may pose safety hazards. Accident Vehicle Inspection: Methods include exterior inspection, light inspection, insurance record check, and interior examination. When purchasing a used car, it is essential to carefully observe aspects such as the manufacturing date, actual mileage, whether the car has been involved in any major accidents, and the level of daily maintenance provided by the previous owner.
11
5
Share

How to Apply for a Ride-hailing Vehicle Operating License?

There are generally two channels to apply for a ride-hailing vehicle operating license: one is to go to the local vehicle management office or traffic police department, and the other is to apply online. To apply at the local vehicle management office or traffic police department, you need to prepare the required materials in advance and then proceed with the staff. The materials to be prepared include: 1. For vehicles owned by a legal entity: business license, identity proof of the handling person and its copy should be provided. 2. For ride-hailing vehicles: application form for the transport certificate. 3. Original vehicle license and its copy: for newly purchased vehicles, the purchase invoice and original vehicle registration certificate and its copy should be provided. 4. Comprehensive performance test report of the vehicle: qualified report. 5. Ride-hailing platform company: letter of intent for service agreement.
7
5
Share

What are the conditions for returning or exchanging a car?

According to the Automobile Three Guarantees Law, the conditions for returning or exchanging a car are as follows: 1. The vehicle has undergone two repairs for serious safety performance failures: If the serious safety performance failure has not been resolved or a new serious safety performance failure occurs. 2. After the engine or transmission has been replaced twice: Or if the same major component of the engine or transmission has been replaced twice due to quality issues and still cannot function properly. The replacement counts for the engine, transmission, and their major components are not duplicated. 3. Steering system, braking system: Or if the same major component of the suspension system, front/rear axle, or body has been replaced twice due to quality issues and still cannot function properly.
10
1
Share

How Often Should the Final Drive Oil Be Changed?

The final drive oil can be changed every 80,000 to 100,000 kilometers. For specific models, please refer to the maintenance manual. Here is an introduction to the final drive oil: 1. Introduction to Final Drive Oil: The final drive is actually the part connecting the two rear wheels of a car. The correct technical term for the final drive is the final reduction ratio gear. Final drive oil is the oil injected into those gears. Final drive oil is just a customary term; in layman's terms, it is actually gear oil, also known as differential oil. 2. Functions of Final Drive Oil: Final drive oil is used in various gear transmission devices to prevent tooth surface wear, scratches, sintering, etc., thereby extending their service life and improving power transmission efficiency. Gear oil should have good anti-wear and load-bearing properties, as well as appropriate viscosity. Final drive oil should also have good thermal oxidation stability, anti-foaming properties, water separation performance, and rust prevention properties. Since gear loads are generally above 490 MPa, and the load on hypoid gear surfaces can reach as high as 2,942 MPa, extreme pressure anti-wear agents are often added to gear oil to prevent oil film rupture, which can cause tooth surface wear and scratches. Sulfur-phosphorus or sulfur-phosphorus-nitrogen additives are commonly used. The working temperature of gear oil is generally lower than that of internal combustion engine oil and largely varies with environmental temperature changes. The oil temperature of vehicle gear oil generally does not exceed 100 degrees Celsius.
17
4
Share

Why is it not recommended to repair dented side skirts?

Here are the reasons why repairing dented side skirts is not recommended: 1. Side skirts are inherently prone to friction: Many repair shops fail to apply the adhesive particle layer after sheet metal work, making side skirts vulnerable to damage. If the repair is not professionally done, the surface may become uneven over time and eventually develop cracks. Additionally, the original anti-rust layer inside the side skirt may be damaged during sheet metal work, leading to rusting from the inside out in the future. However, this can be mitigated by spraying anti-rust wax into small holes yourself. 2. For plastic materials: Generally, pouring hot water to try to make the dent pop out is sufficient, as plastic has some elasticity. If that doesn't work, specialized suction tools can be used for pulling, followed by touch-up paint.
18
5
Share

How to Determine if the Engine Has Taken in Water

Here are the methods to determine if the engine has taken in water: 1. Check the engine oil condition: Normal engine oil colors include light yellow, brown, or transparent colorless, but it is generally not milky white. Use the dipstick to check for the presence of a milky white oil-water mixture. If present, it indicates water has entered the engine. 2. Inspect the air filter: Check the air filter and the lower housing for obvious signs of water ingress. Also, examine the intake pipe and intake manifold for clear traces of water. 3. White smoke from the exhaust pipe: When there is water in the engine fuel or combustion chamber, the heat from combustion turns the water into steam, which exits through the exhaust pipe as white smoke. If white smoke appears after the vehicle has driven through water, it is highly likely that the engine has taken in water.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.