What is the mnemonic rhyme for B2 license holder driving over speed bumps?

1 Answers
MacWilliam
07/30/25 9:17am
The mnemonic rhyme for B2 license holders driving over speed bumps is: Slow down when seeing the speed bump ahead, judge the distance by sight; Consider both front and rear comprehensively, keep the vehicle close to the outer side. Below are specific details about the B2 driver's license: 1. Permitted vehicle types: The B2 license allows driving medium and heavy-duty trucks or specialized operation vehicles, and also permits driving small cars, small automatic transmission cars, low-speed trucks, three-wheeled cars, and wheeled self-propelled machinery. The B2 license does not permit driving buses or tractors; an A2 license is required for tractors, and a B1 license is required for buses. If one wishes to drive both buses and trucks, they need to apply for a B1 or A2 license. 2. Application method: The B2 driver's license can be applied for when initially applying for a driver's license, or it can be upgraded from a lower-level license. In either case, an application must be submitted to the local vehicle management office at the place of household registration, followed by a medical examination and attending a driving school for study and tests as required.
Was this review help?
20
2
Share
More Forum Discussions

What to Do When the Sunroof Makes Noise on Bumpy Roads?

When the sunroof makes noise on bumpy roads, you can check the sunroof's fastening condition, as the noise may be caused by looseness and requires tightening to resolve. The car sunroof not only serves a very practical purpose but also enhances the vehicle's appearance. In summer, car owners should pay attention to inspecting and maintaining the car's sunroof to prevent heavy rain outside and light rain inside the car. Adjusting the sunroof screws to eliminate noise: 1. Open the sunroof by one notch, and you will find a plastic decorative strip on each side of the track, secured at the front, middle, and rear points along with the sunroof. Pull downward in the direction of the car's front and push inward at the other two points to easily remove it; 2. After removing the plastic decorative strip, you can see three screws inside. Loosen the front and rear screws, but do not touch the middle one; 3. Make slight adjustments to the upper and lower parts of the sunroof glass at the front. Observe whether the sunroof glass naturally tilts up or sinks when the screws are loosened, and adjust accordingly by lifting or pulling down. The adjustment range does not need to be too large, about 1 millimeter is sufficient.
11
4
Share

What are the key points for safe driving in rainy weather?

Key points for safe driving in rainy weather: 1. Maintain good visibility - besides driving cautiously, promptly turn on the windshield wipers when driving in rain, and activate low beam headlights and fog lights when the weather is dim; 2. Prevent wheel sideslip - rainwater on the road forms a lubricant between the tires and the road surface, reducing the car's braking performance and making it prone to sideslip; 3. Drive slowly in low gear - when needing to stop, try to decelerate about 100 meters in advance and apply the brakes gently, giving following vehicles sufficient emergency preparation time to avoid collisions or rear-end accidents caused by sudden braking; 4. Avoid getting stuck when wading through water; 5. It's not advisable to accelerate to overtake.
2
3
Share

Is the Accord Hybrid eligible for green license plates?

The Accord Hybrid is not eligible for green license plates. The Accord Hybrid is a gasoline-electric hybrid model, which is classified as an energy-efficient vehicle in China and does not qualify as a new energy vehicle. Therefore, during the vehicle registration process, it cannot benefit from new energy policies and is required to use blue license plates, the same as those for conventional fuel-powered vehicles. In terms of exterior features, the Accord offers a full LED headlight assembly, LED front fog lights, headlight height adjustment, power-adjustable, heated, and folding exterior rearview mirrors, and chrome-plated dual exhaust outlets. Regarding dimensions, the Accord measures 4893 mm in length, 1862 mm in width, and 1449 mm in height, with a wheelbase of 2830 mm.
20
0
Share

What is the function of OBD?

OBD is the On-Board Diagnostics system. This system continuously monitors the engine's operating conditions to check if the vehicle's emissions exceed the standard. If they do, it will immediately issue a warning. When a system malfunction occurs, the malfunction indicator light or check engine warning light will illuminate, and the Powertrain Control Module (PCM) will store the fault information in memory. Through a specific procedure, the fault code can be read from the PCM. Based on the fault code, maintenance personnel can quickly and accurately determine the nature and location of the fault. The OBD device monitors multiple systems and components, including the engine, catalytic converter, particulate trap, oxygen sensor, emission control system, fuel system, EGR, etc.
3
1
Share

How to Determine if a Used Car is an Accident Vehicle?

Methods to determine if a used car is an accident vehicle: 1. Check the car paint—scratches on the car can be identified by examining the paint. Light scratches can be concealed with a polishing machine, while deep scratches require repainting. 2. Inspect the front and rear bumpers—evidence of accidents can often be found on the bumpers. Open the hood and use a flashlight to check for any damage or welding marks. 3. Examine the engine compartment—look for signs of screws being turned or any abnormal wrinkles or dents. 4. Check the A, B, and C pillars—if these are deformed, it indicates a significant accident. During inspection, first observe for obvious bumps, then remove the door frame seal to check if the welding spots are neat.
12
2
Share

How does the rotary distributor fuel injection pump supply fuel?

The fuel supply method of the rotary distributor fuel injection pump: During operation, clean diesel from the diesel filter enters the injection pump, where it is pressurized by the vane-type transfer pump (secondary pumping). The low-pressure diesel is then divided into two paths and enters the fuel chamber of the distributor pump. The diesel in the distributor pump is pressurized by the plunger, then flows through the central oil passage of the distributor plunger, distribution holes, delivery valve, and high-pressure fuel lines until it reaches the injector. The rotary distributor fuel injection pump is a type of plunger fuel injection pump. Its characteristic is that it uses a single set of plungers to pump fuel, with the pumped fuel directed to different cylinders via a rotating mechanism, ensuring balanced fuel supply to each cylinder. The main difference between the rotary distributor fuel injection pump and other types of plunger fuel injection pumps is that it uses one set of plungers to supply fuel to all cylinders, whereas other types of plunger fuel injection pumps use a separate set of plungers for each cylinder.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.