What is the mnemonic for the lighting test in Subject 3?

1 Answers
VonPatrick
07/29/25 7:40pm
Subject 3 lighting test mnemonic: 1. High beam: Driving at night on roads without streetlights or under poor lighting conditions (high beam). 2. Low beam: Meeting non-motor vehicles on narrow roads at night (low beam). 3. Low beam: Following another vehicle closely at night (low beam). 4. Low beam: Meeting motor vehicles at night (low beam). 5. Alternating high and low beams: Passing over bridges or pedestrian crossings at night (alternate high and low beams). 6. Alternating high and low beams: Passing sharp curves or slopes at night (alternate high and low beams). 7. Alternating high and low beams: Passing intersections without traffic signals at night (alternate high and low beams). 8. Width markers and hazard warning lights: Vehicle breakdown on the road at night that obstructs traffic and is difficult to move (width markers and hazard warning lights). 9. Fog lights and hazard warning lights: Driving in foggy conditions (fog lights and hazard warning lights).
Was this review help?
13
1
Share
More Forum Discussions

When the car tail deviates to the right while reversing, which way should the steering wheel be turned?

When the car tail deviates to the right while reversing, turn the steering wheel to the right. Here are the detailed instructions: Principle of direction correction: Take the car tail as the reference. If the tail tends to lean right, turn the steering wheel right; if the tail leans left, turn it left, then straighten in the opposite direction. Reference points for reversing into a parking space: Lines drawn on the ground can be seen through the rearview mirror; the side of another car or a wall makes it easy to spot deviation—look for a properly parked car as a reference; the wall at the rear of the car is a bit more challenging—look back directly (not through the rearview mirror) and adjust the direction at any time to ensure the car is perpendicular to the wall. Mastering basic techniques: Before reversing, observe the surroundings carefully and decide whether the tail should go left or right. Turn the steering wheel left to make the tail go left, and turn it right to make the tail go right.
2
4
Share

Why is the reverse light always on?

The reverse light staying on continuously may be due to a faulty reverse switch. Here are the details: Influencing factors: Poor performance of the reverse radar itself: This is caused by the reverse radar control unit's own poor performance; Abnormal connection of related wiring. Introduction to reverse lights: Reverse lights are installed at the rear of the vehicle to illuminate the road behind and warn vehicles and pedestrians that the car is reversing. All reverse lights are white. Working principle of reverse lights: It is a normally open switch (normally disconnected). When the reverse gear is engaged, the mechanical mechanism presses down the switch contacts; this closes the circuit, turning on the reverse light and triggering the reverse gear warning sound. When the reverse gear is disengaged, the switch contacts spring back, and the reverse light circuit returns to the open state. Generally, the reverse light switch in a tractor is installed on the transmission and is triggered by a depression on the gear shift lever.
4
0
Share

What is the use of the reversing mirror image?

Here is an introduction to the functions of the reversing mirror image: Use of auxiliary lines: Static reversing auxiliary lines do not change during the reversing and steering process. Dynamic reversing auxiliary lines: During the reversing and steering process, the auxiliary lines in the reversing image automatically calculate the vehicle's reversing trajectory based on the steering wheel's rotation angle, helping the driver predict the position after reversing and plan the reversing route in advance. The role of the reversing image: The reversing image compensates for the lack of visualization in reversing radars. It features digital display + sound alerts + real image display + night vision + vehicle multimedia performance (optional), addressing the issue of too many blind spots in ultrasonic reversing radars.
2
1
Share

How to reset the wrench light on a 2019 Corolla?

2019 Corolla wrench light reset method: 1. With the vehicle turned off, press and hold the trip meter button on the instrument panel for more than five seconds; 2. Power on the vehicle, wait for the maintenance light to flash, and the wrench symbol will disappear after a few more seconds. Taking the 2019 Corolla Hybrid 1.8L E-CVT GL-i Pioneer Edition as an example: It is a compact car under FAW Toyota, with dimensions of 4635mm in length, 1780mm in width, and 1455mm in height. The 2019 Corolla Hybrid 1.8L E-CVT GL-i Pioneer Edition is equipped with a 1.8L naturally aspirated engine, delivering a maximum power of 90kW, paired with an E-CVT continuously variable transmission.
13
4
Share

What Causes the Clicking Sound When Reversing?

When reversing, the clicking sound is generally a normal phenomenon. Here are the specific explanations: When moving forward: Since the brake pads are mounted on the brake caliper bracket, under normal circumstances, the brake pads fit tightly against the front end of the bracket in the direction of travel, leaving no gap. Therefore, no abnormal noise occurs when braking while moving forward. When reversing: When the vehicle is moving backward, the direction of travel is opposite, and there is a certain gap between the brake pads and the rear end of the bracket. As a result, when braking, the brake pads may hit the rear end of the bracket, producing a clicking sound. This is a normal phenomenon. Improvement method: Applying a thin layer of grease to the contact points between the brake pads and the brake caliper bracket can help alleviate this issue to some extent. It is important to note that the grease should not be applied to the friction surface of the brake pads or the brake disc, as this could negatively affect braking performance.
18
1
Share

Which Gear to Use When Reversing?

When reversing, use the reverse gear, which is the R gear. Here are the specific details: Introduction to Automatic Transmission Gears: The gears of an automatic transmission car, from top to bottom, are as follows: P gear is the parking gear; R gear is the reverse gear; N gear is the neutral gear; D gear is the drive gear; D1 and D2 are specialized gears for long uphill and downhill driving. Reversing Tips: When reversing, lean forward slightly to check the right rearview mirror and observe the positional relationship between the car body and the corner of the parking space in advance. Predict whether the car body will be too close or too far from the corner based on the image seen in the rearview mirror, then adjust the steering accordingly. It is best to maintain a distance of 30 centimeters between the car body and the corner. Determine when to stop by observing the relationship between the left rearview mirror and the boundary line. When the left rearview mirror covers the boundary line, immediately press the clutch to stop.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.