What is the minimum voltage at the moment of ignition start?

1 Answers
Allison
07/25/25 7:58am
The minimum voltage at the moment of ignition start is approximately 10.8V. Regarding car batteries, the charging voltage typically should not exceed 14.4V. The lower limit of voltage during ignition start is around 10.8V, while the voltage during startup is about 11.8V, and the voltage after startup is around 14V. When the battery voltage drops below 10V, it indicates severe battery depletion, and the car usually cannot be started, requiring a recharge. Below is an introduction to car batteries: 1. Function of the battery: The battery, also known as a storage battery, provides electrical energy for starting the car and adjusts the imbalance between the generator's output and the load. (1) When the engine is running, the generator primarily supplies power to various electrical devices. If the generator produces excess electricity, the surplus is stored by charging the battery. When the engine starts or the generator's output voltage is too low to power the electrical devices, the battery supplies the power. (2) When the engine is not running, the battery powers the electrical devices. If the power demand of the electrical devices exceeds the generator's output, the battery and generator work together to supply power. If the power demand is less than the generator's output, the generator powers both the battery and the electrical devices. If the generator fails, the battery can provide emergency power, ensuring the car's electrical devices can operate for a short time. 2. Battery maintenance: Modern maintenance-free batteries often use alloy grids, enhancing corrosion resistance and tensile strength. The lost electrolyte during charging can quickly flow back, eliminating the need for liquid replenishment. Maintenance-free batteries typically have strong overcharge resistance, long energy storage duration, and can provide stable high-current output. When using maintenance-free batteries, note that if they are excessively discharged and not recharged promptly, their lifespan will be shortened. Therefore, for cars parked for extended periods, it is advisable to start the car every 25 days or so and let it idle for about 10 minutes. Otherwise, prolonged parking may lead to excessive discharge, making the car unable to start. Additionally, in winter, if the car has difficulty starting and repeated ignition attempts are made, it can cause excessive battery discharge and damage.
Was this review help?
16
2
Share
More Forum Discussions

Can China 5 be upgraded to China 6?

Yes, upgrading components such as the three-way catalytic converter and engine ECU logic can indeed improve the vehicle's emission standards. Here is relevant information: 1. Reason: The emission standard of each vehicle is already recorded in the factory-issued vehicle qualification certificate, so even if it meets the China 6 standard through various methods, it does not mean it is a "China 6 vehicle." Additionally, since European emission standards are ahead of China's, many global models already meet the yet-to-be-announced China 6 standard. However, due to China's fuel quality not yet meeting the China 6 standard and only the China 5 standard being certifiable previously, these vehicles can only be classified as China 5 models. 2. China 6: The full name of the "China 6" emission standard is the "National Sixth Stage Emission Standard for Light-Duty Vehicles." It is an upgraded standard based on China's domestic conditions, building upon the "Limits and Measurement Methods for Emissions from Light-Duty Vehicles (China 5)."
14
4
Share

What are the sounds of abnormal engine noises?

Abnormal engine noises can be categorized into the following types: 1. The first is a high-pitched squealing sound from the belt: This is usually caused by belt slippage. 2. The second is a sharp metallic friction sound: This is generally due to damage to the bearings of the generator, water pump, or power steering pump. 3. The third is a tapping sound in the engine compartment: Due to gravity, all the lubricating oil in the engine flows back to the oil pan after the vehicle has been parked for a period of time. During a cold start, the oil pump needs to "transport" the oil from the oil pan back through the oil passages to various moving parts and friction pairs, establishing and maintaining a certain oil pressure. During the process of oil "transportation" and oil pressure buildup, an oil film has not yet formed between the components, especially the hydraulic lifters in the cylinder head, which need to go through an oil-filling process. At this time, the valve clearance is relatively large, resulting in normal mechanical "tapping" sounds when the valves close and seat.
2
2
Share

How Many Seats for Passenger Vehicles in Beijing Do Not Require a Lottery?

In Beijing, only passenger vehicles with fewer than 7 seats require a lottery, while others do not. However, there are several types of vehicles that are exempt from the lottery. Here are the details: 1. Light panel vans: Since they are registered as trucks, they are not allowed to drive within the Fifth Ring Road from 6:00 to 23:00 every day. Additionally, they must undergo an annual inspection starting from the date of registration. During the inspection, it must be confirmed that the cargo partition is securely installed, the vehicle body is marked with 'Closed Truck' and the total weight, and reflective stickers are applied as required. The service life of these vehicles is 15 years. 2. Beijing-licensed vehicles auctioned by the court: These vehicles are usually seized by the court due to the original owner's debt or other reasons and then auctioned to settle the debt. However, it is important to note that to qualify for the auction, applicants must have participated in the lottery but failed to win. In other words, you must already be eligible for the Beijing passenger vehicle lottery to apply for the auction; otherwise, you cannot participate.
1
3
Share

What is the 0-100 km/h acceleration time of the Subaru BRZ?

Subaru BRZ manual transmission version has a 0-100 km/h acceleration time of 7.6 seconds, while the automatic transmission version takes 8.2 seconds. The following are the specific details of the Subaru BRZ: 1. In terms of appearance, the Subaru BRZ is equipped with an STI sports body kit compared to the previous model, including a front lip and side skirts. 2. In terms of configuration, the Subaru BRZ adds a tire pressure monitoring function and upgrades the suspension system with SACHS brand shock absorbers from ZF. It also adds welcome lights, dashboard display brightness adjustment function, and a turn signal lever that flashes three times and automatically resets. 3. The BRZ is powered by a 2.0L horizontally opposed four-cylinder engine, paired with a 6-speed manual transmission, delivering a maximum power of 147 kW and a peak torque of 205 N·m.
5
5
Share

How to Turn On the High and Low Beams on a Volkswagen?

Volkswagen's high and low beam switch is located on the left side of the steering wheel, as part of a set of lighting controls. Below is a detailed introduction to the adaptive high and low beam function: 1. Adaptive high and low beams refer to the vehicle's headlights automatically switching between high and low beams during nighttime driving. This is achieved through sensors, typically a camera mounted on the inside of the windshield, which detect oncoming or same-direction vehicles and pedestrians. This allows the driver to focus more on driving without the need to manually switch between high and low beams frequently. 2. The car's adaptive high and low beam lighting system uses a camera located on the rearview mirror to detect vehicles ahead, with a detection range of up to 400 meters. If an oncoming vehicle is detected, the system selectively blocks the high beam light range to avoid shining directly on the vehicle, ensuring clear visibility for the driver without affecting the oncoming vehicle. When the system detects no vehicles ahead, it automatically switches back to high beams.
10
1
Share

Can 75% Alcohol Be Brought into a Car?

From a safety perspective, 75% alcohol is not allowed to be brought into a car. Here are the detailed explanations: 1. Alcohol is a Class A fire hazard: The ignition point of alcohol is only 20°C. If the temperature inside the car is too high, it may cause spontaneous combustion. Therefore, it is best not to place alcohol in the car. If alcohol must be stored in the car, it is recommended to keep it in a well-sealed bottle, placed in a spot away from sunlight and relatively cooler, or park the car in a shaded area. 2. The flash point of 100% alcohol is around 12°C, while 75% alcohol has a flash point of approximately 22°C: The so-called "flash point" refers to the lowest temperature at which a mixture of fuel and outside air can ignite and immediately burn when exposed to a flame. Simply put, 75% alcohol can easily ignite or even explode at a minimum temperature of 22°C.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.