What is the minimum speed limit on national highways?

1 Answers
VanFernando
07/28/25 2:40pm
National highways have a speed limit standard of 60-80 km/h, with the minimum speed being 60 km/h. Below is detailed information about vehicle speeds: 1. Overview: Vehicle speed refers to the distance a vehicle travels per unit of time, commonly referred to as speed, with units typically being kilometers per hour (km/h) or meters per second (m/s). Vehicle speed is one of the three key parameters used to describe traffic flow and holds significant importance in traffic flow theory research. 2. Other aspects: Vehicle speed can also broadly refer to the speed of motor vehicles. To suit different purposes, vehicle speeds are mainly categorized into spot speed, segment speed, and design speed. Spot speed refers to the instantaneous speed of a vehicle passing a specific point on the road. Design speed is the speed established to determine the design parameters of various geometric elements of a road and ensure their coordination.
Was this review help?
9
3
Share
More Forum Discussions

What is the emission standard of Kawasaki Z900?

Kawasaki Z900 complies with the China IV emission standard. China IV Standard: The China IV emission standard is the fourth stage national standard for motor vehicle pollutant emissions. Main automotive pollutants include HC (hydrocarbons), NOx (nitrogen oxides), CO (carbon monoxide), and PM (particulate matter). Through technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices, this standard controls and reduces vehicle emissions below specified limits. The China IV standard requires approximately 50% lower emissions for various pollutants compared to China III. Specifications: The most significant change in Kawasaki's new Z900 is the front headlight adopting a family-style design similar to the ZH2. The powertrain still utilizes the previous 948cc liquid-cooled inline-four engine, with this 948cc inline-four unit limited to 86.3kW (international version produces 92.2kW).
7
0
Share

What Causes the Creaking Sound in Audi Q5 Steering Wheel?

Here are the specific reasons for the creaking sound when turning the steering wheel in an Audi Q5: 1. Faulty Clock Spring: If the sound comes from inside the steering wheel, it may be caused by interference from the clock spring inside the steering wheel. 2. Lack of Lubrication in Shock Absorber Top Bearing: When turning the steering wheel, if the sound comes from outside the car, it may be due to lack of lubrication in the shock absorber's top bearing. If this is the case, applying some grease can resolve the issue. 3. Loose Stabilizer Bar Bushing: If the sound does not originate from the shock absorber's top bearing, check whether the stabilizer bar bushing is loose or damaged. A loose or damaged stabilizer bar bushing will not only produce noise when turning the steering wheel but also when driving over uneven roads. This issue can be fixed by adding shims. 4. Dirty Power Steering Fluid: If the power steering fluid is too dirty, it will increase the pressure in the power steering system. It is important to replace the power steering fluid promptly.
14
5
Share

How to Replace the Battery in a Roewe 550 Key?

Roewe 550 key battery replacement method is as follows: Find a small switch on the back of the car key and press it; grasp the metal part above and pull it upwards. This is the mechanical key of the car, used when the key runs out of power. After pulling out the mechanical key, you can see a small groove in the middle of the key. Use the head of the mechanical key to pry open the key cover. Once the key cover is opened, you can see the battery inside. Remove the battery and replace it. Extension: The new Roewe 550 embodies the collective wisdom and engineering development experience of SAIC engineers. It has improved seven major systems (exterior, interior, chassis, powertrain, electronic and electrical, safety, and regulations) and optimized 43 details. Based on the inheritance of Roewe's brand DNA of "taste," "technology," and "realization," it fully absorbs the latest technology and design trends, with the car's surface design being full and dynamic.
17
0
Share

What to Do When a Car Horn Gets Wet?

When a car horn gets wet, the best solution is to open it and let it air dry, allowing the water inside to evaporate naturally. Otherwise, prolonged moisture may cause a short circuit in the wiring. Alternatively, promptly remove the horn and dry it, preferably using a dryer to ensure thorough drying. Additionally, when washing the car, always be cautious to prevent high-pressure water jets from soaking the car horn. Methods to prevent the horn from getting wet include: 1. Install the horn in a higher position and angle it downward at 60 degrees. This not only effectively prevents water from entering the horn but also allows any water that does enter to drain out naturally without accumulating inside. 2. Use a waterproof board (a regular plastic board will suffice) and secure it in the gap between the bumper and the front left wheel in front of the horn. This will effectively block water splashed up by the wheels.
19
0
Share

Why can't the Chery Tiggo 5 automatic transmission engage?

The gear may be locked or not fully braked when parking, directly shifting into P gear, causing gear braking instead of brake braking. Precautions for shifting gears in automatic transmission vehicles: Generally, after parking an automatic transmission vehicle, it should be shifted to P gear to prevent rolling away in neutral or being unable to remove the key when in drive gear. To continue driving, the engine must be started and the brake pedal must be pressed to shift gears. When the brake pedal is pressed, the brake light switch will activate, sending a signal to the computer, allowing the gear to be engaged. If the brake light switch malfunctions, it will not send a signal to the computer, making it impossible to shift gears. In this case, it is necessary to visit a repair shop to check the brake light switch. Automatic Transmission: It does not require the driver to manually shift gears. The vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. Generally, automatic transmission vehicles have six gear positions, from top to bottom: P, R, N, D, S, L.
18
1
Share

What is the battery model for the Mercedes-Benz C-Class key?

The battery model for the Mercedes-Benz C-Class remote key is CR2032. Replacing the battery: Take the Mercedes remote key, face the back of the key toward yourself, press the small button at the bottom while simultaneously pushing the back cover upward to remove it. Pull out the battery holder from the left side of the remote key, remove the old button battery, and replace it with a new CR2032 button battery. Reinsert the battery holder and reattach the back cover as it was. Mercedes-Benz C-Class: It is the best-selling model and also the most comprehensive lineup among all Mercedes-Benz series. The new C-Class sedan is equipped with an active safety system, intelligent lighting system, preventive safety system, passenger safety protection system, and rescue tools, making it comfortable, refined, practical, and top-tier in safety. The C-Class sedan can take several measures based on the type and severity of an accident: automatically shutting off the engine, cutting off the fuel supply. Hazard warning lights and emergency interior lights are activated automatically, and if necessary, the side windows are partially lowered, and the doors are automatically unlocked.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.