What is the minimum speed for third gear?

1 Answers
LaAlyssa
07/29/25 6:38pm
Third gear speed should not be lower than 20Km/h. First gear is the starting gear, used when the vehicle begins moving. It shares similar gear ratio and performance characteristics with reverse gear, thus prolonged high-speed operation is not recommended. Generally, you can shift to second gear once the vehicle gains momentum. Second gear serves as the passing gear, primarily used for navigating complex road conditions such as sharp-angle (90-degree) turns without special obstacles, crowded urban areas, steep slopes, and bumpy roads. Gear shifting techniques: Smoothness: When engaging a new gear, properly coordinate clutch release with timely throttle application for smooth transitions. Precision: Body movements should be coordinated and accurate - sloppy operation creates strong jerking sensations that degrade driving experience. Swiftness: Gear changes should be quick to enhance vehicle smoothness, reduce kinetic energy loss, and improve fuel efficiency. Timeliness: Perform proper gear shifts at appropriate moments - neither too early nor too late.
Was this review help?
20
4
Share
More Forum Discussions

What are the differences between the Trumpchi GS4 and GS5?

The differences between the Trumpchi GS4 and GS5 are: 1. Different tire specifications: The Trumpchi GS4 has tire specifications of 225/60r17, while the GS5 has tire specifications of 235/50r19. 2. Different body dimensions: The Trumpchi GS4 has a body length, width, and height of 4545mm, 1856mm, and 1668mm respectively, while the GS5 measures 4695mm, 1885mm, and 1726mm. Both the Trumpchi GS4 and GS5 are equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169ps, a maximum power of 124kW, and a maximum torque of 265Nm.
20
2
Share

What engine does the Ferrari FF use?

The Ferrari FF is equipped with a 6.3L V12 naturally aspirated engine, delivering a maximum horsepower of 660 PS, a maximum power output of 485 kW, and a peak torque of 683 Nm at 6000 rpm. It is paired with a 7-speed dual-clutch transmission. Taking the 2012 Ferrari FF as an example, it is a hardtop sports car with the following dimensions: length 4907 mm, width 1953 mm, height 1379 mm, and a wheelbase of 2990 mm. It has a fuel tank capacity of 91 liters, a trunk capacity of 450 liters, and a curb weight of 1790 kg.
12
0
Share

What do T and L represent in cars?

In cars, T and L represent: 1. T stands for Turbocharging: A turbocharger increases the intake air volume without changing the engine's displacement, thereby enhancing output power and resolving the contradiction between increasing power and achieving engine lightweight and compactness. 2. L stands for Naturally Aspirated: Naturally aspirated is a type of car intake system where air is drawn into the combustion chamber by atmospheric pressure without the use of any supercharger. For car owners who frequently drive on highways, it is advisable to choose an engine with a T (turbocharged) as highway speeds often demand certain performance requirements. In such scenarios, turbocharging can effectively leverage its advantages. In stop-and-go traffic, turbocharged engines can be more prone to damage and may increase fuel consumption, whereas on highways, turbocharging can fully unleash its potential, providing a more powerful driving experience compared to naturally aspirated engines.
8
2
Share

What is the method for replacing the fuel filter element on the City?

The method for replacing the fuel filter element on the City is: 1. Close the inlet valve of the filter, unscrew the end cover bolts, and open the end cover; 2. Open the drain valve to completely drain the dirty oil; 3. Loosen the fastening nut at the top of the filter and remove the old filter element vertically upwards; 4. After replacing the filter, close the drain valve and secure the end cover with bolts. Taking the 2019 City as an example, it belongs to the compact car category with body dimensions of: length 4450mm, width 1695mm, height 1477mm, wheelbase 2600mm, and fuel tank capacity of 40 liters. The 2019 City features a MacPherson strut front suspension and a torsion beam rear suspension.
4
2
Share

What type of gasoline does the Jetta VS5 use?

The Jetta VS5 uses 95-octane gasoline. Taking the 2020 Jetta VS5 as an example, its body dimensions are: length 4419mm, width 1841mm, height 1616mm, with a wheelbase of 2630mm, a fuel tank capacity of 51 liters, and a trunk capacity of 482 liters. The 2020 Jetta VS5 features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4L inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 6-speed automatic transmission.
4
4
Share

What transmission does the BMW X3 use?

The BMW X3 uses a transmission provided by ZF. ZF is a globally active technology group that offers mobility system solutions for passenger cars, commercial vehicles, and industrial technology. It is also a major supplier of special transmissions for ships, forklifts, railway locomotives, and helicopters. The BMW X3 is equipped with an 8-speed automatic transmission. This automatic transmission has eight forward gears. Essentially, an automatic transmission is a traditional AT or CVT transmission with the added functionality of manual shifting. The purpose of an automatic transmission is to enhance the driving pleasure of automatic vehicles. When using the BMW X3's transmission in daily driving, the following points should be noted: Do not delay changing the transmission oil for extended periods. Prolonged failure to change the transmission oil can lead to damage to internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, this can cause the transmission to overheat and may result in a noticeable jolt when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Many drivers, aiming to showcase smooth operation, shift into reverse while the vehicle is still moving, which can severely damage the transmission gears and, over time, lead to gear grinding and other malfunctions. Avoid frequently climbing steep slopes in Drive (D). On steep inclines, automatic vehicles can overheat due to high load or may upshift too early, resulting in insufficient power. In such cases, using manual mode to lock in lower gears or switching to sport mode can help protect the transmission. Do not tow the vehicle over long distances. If an automatic vehicle breaks down, it should be transported using a flatbed tow truck with the transmission in Neutral (N). Towing with a rope or dragging the vehicle directly should be avoided.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.