What is the minimum speed for fourth gear?

2 Answers
DeJoshua
07/24/25 12:32pm
For a manual transmission car, the minimum speed for fourth gear is 40km/h. Below is relevant information about car gears: 1. Speed range: First gear corresponds to a speed of 0-5km/h, second gear to 5-20km/h, third gear to 20-40km/h, fourth gear to 40-60km/h, and fifth gear to 60-100km/h. 2. Shifting timing: Generally, the shifting timing for most cars is when the engine reaches 2000r/min, and should not exceed 2500r/min. For some high-displacement, high-power engines, shifting can be done around 3000r/min.
Was this review help?
18
5
Share
VanessaMarie
08/11/25 6:37am
When driving in fourth gear, the minimum speed usually depends on engine torque and vehicle type. For example, my old car with a 1.6L engine can maintain a stable speed of around 40 km/h on flat ground in fourth gear. Any lower, and the engine starts to shake and may stall. This is related to individual driving habits. If you want to test it, gradually accelerate to fourth gear and then release the throttle to decelerate until you notice the point where the car begins to jerk—that’s the lower limit. It also depends on the load; with heavy cargo, you might need to maintain at least 50 km/h for stability. Regular transmission maintenance and checking clutch wear are crucial, as driving too slowly in a high gear can strain the engine and waste fuel. A fuel-saving tip is to keep the speed between 50 and 80 km/h in fourth gear, where the engine runs at lower RPMs and the fuel pump is more efficient. However, going below the minimum speed makes the car struggle, compromising safety and increasing maintenance costs.
Was this review help?
12
5
Share
Expand All
More Forum Discussions

Do You Need to Return to Neutral When Downshifting from Second to First Gear?

Downshifting from second to first gear does not require returning to neutral. Points to note when shifting gears in a car: Note 1: Accelerate before upshifting, decelerate before downshifting. Gear shifting should be timely, correct, smooth, and quick, and upshifting should not skip gears. Note 2: Coordinate the clutch pedal, throttle pedal, and gear lever. Information about car gears is as follows: First gear: This is the starting speed, usually between 0-5km/h. Second gear: Corresponding speed is between 5-20km/h. Third gear: Corresponding speed is between 20-40km/h. Fourth gear: Corresponding speed is between 40-60km/h. Fifth gear: Corresponding speed is between 60-100km/h.
7
2
Share

Can You Stop Directly by Braking in Second Gear?

You cannot stop directly by braking in second gear. When stopping in second gear, you need to first apply the brakes, and then press the clutch when the speed decreases to near stopping. This is to prevent the engine from stalling. In case of an emergency requiring immediate stopping, you should press both the clutch and brake simultaneously. Below are some related tips: Proper intermittent braking: Apply intermittent braking, with higher and longer frequency being more effective to prevent the vehicle from rolling over. Low-speed driving: When emergency braking on icy or snowy roads, the vehicle is prone to skidding. You should use low-speed driving to allow engine braking to decelerate.
10
1
Share

What is the speed in second gear?

Second gear speed is generally around 20km/h. Here is some relevant information: Method: Second gear is a transitional gear for acceleration after starting or for low-speed forward movement. You can check the speedometer or listen to the sound. After starting, shift directly into second gear. When the engine speed reaches a certain level, it will produce a whining sound, which is quite loud. At this point, the speed does not increase significantly, and you can shift to the next gear. Mechanical transmission: It primarily utilizes the principle of gear reduction. Simply put, the transmission contains multiple sets of gear pairs with different transmission ratios. The act of shifting gears while driving involves using the control mechanism to engage different gear pairs in the transmission. For example, at low speeds, a gear pair with a larger transmission ratio is engaged, while at high speeds, a gear pair with a smaller transmission ratio is engaged.
12
4
Share

Can You Start in Second Gear?

Starting in second gear is possible, but it will wear out the clutch plates of the car. Additionally, since the torque in second gear is smaller than in first gear, the engine must rotate faster to provide more power for starting in second gear. This process consumes more fuel and is prone to carbon buildup. Here are some driving precautions: Control the starting gear properly: The starting gear should always be first gear. Whenever the vehicle moves from a standstill to starting, the gear should remain in first. Shift gears sequentially: During road tests, avoid skipping gears. Gear changes should only be from first to second, second to third, and so on, in sequence. Otherwise, the test recorder will note this and deduct corresponding points. Shift gears quickly and steadily: The key to shifting gears is speed—complete the series of actions (depressing the clutch, shifting gears, and pressing the accelerator) as quickly as possible. When shifting gears, the clutch must be fully depressed, and gear changes should only occur within a certain speed range.
11
3
Share

Do Used Car 4S Stores Still Offer Warranty?

If the vehicle is still within the warranty period, it can be covered by the warranty; otherwise, it cannot. A used car refers to a vehicle that has not yet reached the national standard for scrapping and has been registered with the public security traffic management authority, making it eligible for transaction and ownership transfer. The advantages of purchasing a used car are as follows: Cost-effective: Used cars are generally not the latest models on the market and are typically two years behind. Buying the same brand and model one or two years later can save money. Additionally, with rising fuel prices, the cost of commuting continues to increase. If finances are tight and the car is only needed for basic transportation, buying a used car is more economical. Low depreciation rate: Any car, once registered with the vehicle management office, depreciates in value each year. According to Fair Price used car evaluations, the higher the car's grade, the greater the depreciation rate.
16
2
Share

At what speed should you downshift from second gear to first gear?

When downshifting from second gear to first gear, you should brake to reduce speed, decelerate to about 15 mph, immediately release the brake and press the clutch, then quickly shift from second gear to first gear, followed by rapidly lifting the clutch pedal to the semi-engaged state. Once the clutch is engaged, gently release the clutch pedal. Speed ranges for different gears: Start in first gear, shift to second gear when reaching 20 km/h; shift to third gear at 30 km/h; shift to fourth gear at 40 km/h; shift to fifth gear at 50 km/h, and use fifth gear for speeds above 50 km/h. Precautions for driving a manual transmission car: The correct way to press the clutch is to place the ball of your foot on the clutch pedal with your heel touching the ground. When the clutch is fully depressed, keep your knee slightly bent. Avoid using your toes to press the pedal or lifting your heel off the ground, as this may lead to insufficient force or slipping. Always depress the clutch fully to ensure complete disengagement and prevent wear. If you encounter difficulty shifting gears, release the clutch first, then press it again before attempting to shift. Never force the gearshift, as this can cause friction between the transmission gears. When driving downhill, never coast in neutral; always engage an appropriate gear to utilize engine braking and control the vehicle's speed.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.