What is the minimum score a driver's license cannot fall below?

3 Answers
StBrayden
08/27/25 7:44am
It cannot fall below 0 points. If the demerit points reach 12, the driver must attend a seven-day study session on road traffic safety laws, regulations, and related knowledge, and take an exam. Below is relevant information about driver's license demerit points: 1. Explanation: Drivers holding licenses for large buses, tow trucks, city buses, medium-sized buses, or large trucks must report to the traffic management department of the public security authority within thirty days after the end of each scoring cycle for inspection. However, if there are no demerit records within a scoring cycle, the inspection for that cycle is waived. 2. Other regulations: According to Article 68 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' if a motor vehicle driver accumulates 12 demerit points within a scoring cycle, the traffic management department of the public security authority shall confiscate their motor vehicle driver's license. The driver must, within fifteen days, attend a seven-day study session on road traffic safety laws, regulations, and related knowledge at the traffic management department of the public security authority where the driver's license was issued or where the violation occurred.
Was this review help?
4
4
Share
StCameron
09/09/25 6:29am
As a seasoned driver with years of experience, I know all too well that a driver's license starts with 12 points, but that's not the end of it. You definitely don't want to drop below zero points, or you'll be completely done for—your license will be revoked. I remember one time I was speeding and got slapped with a 6-point deduction, nearly costing me my job. The key lies in road safety. Serious violations like drunk driving or running red lights carry heavy point penalties, and if you lose all your points, you risk revocation, forcing you to spend months and money retaking tests. Cultivating good habits is crucial, such as regularly checking your point records on the traffic management app to avoid repeat offenses. Driving is no joke—the point system is a monitoring tool designed for the safety of pedestrians and other drivers on the road, as well as maintaining public order. Everyone should cherish these points and not let them drop below the baseline into negative territory.
Was this review help?
14
5
Share
Expand All
OGemma
10/23/25 7:20am
I just got my driver's license. During driving lessons, the instructor repeatedly emphasized that 12 points are the baseline - never let it drop to zero or you'll face license revocation and retesting. The rules are quite strict. As a beginner, I pay extra attention to details like not answering calls while driving or illegal parking, which could cost 1-3 points. The risks accumulate quickly - revocation means retaking the theoretical exam, wasting both time and money while disrupting daily life. Safety comes first. Before every trip, I remind myself to follow traffic rules and minimize mistakes. Don't underestimate point management - it helps new drivers build responsibility during the transitional period, cultivating good habits that bring lifelong benefits.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

Why is Honda's car paint so thin?

Because the same performance effect is achieved by upgrading materials or structures, and the formula of the paint coating is optimized, the thickness of the car paint is thin. Here is the extended information: 1. Introduction: Honda (Honda Motor Co., Ltd.) is a Japanese multinational corporation that manufactures transportation vehicles and machinery. The company was founded by Soichiro Honda in September 1948 in Hamamatsu, Shizuoka Prefecture, Japan, and is headquartered in Tokyo, Japan. It is the world's largest motorcycle manufacturer and the world's largest manufacturer of internal combustion engines. Its main businesses include the production of automobiles, motorcycles, engines, aircraft, and power equipment. 2. Brand logo: The 'H' is the graphic trademark of Honda cars, which is the first capital letter of 'HONDA', the Japanese pronunciation of 'Honda'. The letters 'HM' in the Honda car logo are the abbreviation of 'HONDA MOTOR', and above these two letters are the wings of an eagle, symbolizing 'the leap of Honda's technology and the boundless future of Honda Company'.
17
1
Share

Why is the fuel consumption of Buick Excelle XT so high?

The reasons and solutions for the high fuel consumption of the Buick Excelle XT are as follows: 1. Engine carbon deposits: Excessive carbon deposits can lead to incomplete combustion of the air-fuel mixture, increasing fuel consumption. Therefore, it is necessary to regularly clean the engine carbon deposits, including: the intake tract, throttle valve, fuel injector, and cylinder deposits. The solution is to clean the carbon deposits in a timely manner. 2. Vehicle weight: Carrying excessively heavy items in the vehicle can increase fuel consumption by about 2% compared to normal driving fuel consumption! The solution is to reduce the vehicle weight when carrying too many items. 3. Clogged air filter: A clogged air filter can obstruct air intake, resulting in an overly rich air-fuel mixture or a clogged exhaust pipe. The solution is to replace the air filter promptly. 4. Aging spark plugs: Worn-out spark plugs with excessive gap wear can cause insufficient ignition, leading to incomplete combustion of the air-fuel mixture and increased fuel consumption. The solution is to replace the spark plugs in a timely manner.
15
2
Share

What is the function of Skoda Octavia sensors?

The functions of Skoda Octavia sensors are as follows: 1. Intake pressure sensor: Reflects changes in the absolute pressure within the intake manifold and provides the ECU (Engine Control Unit) with a reference signal for calculating fuel injection duration. 2. Throttle position sensor: Measures the opening angle of the throttle and provides the ECU with a reference signal for fuel cutoff, fuel/air ratio control, and ignition timing correction. 3. Intake temperature sensor: Detects the intake air temperature and provides the ECU with data for calculating air density. Coolant temperature sensor: Detects the coolant temperature and provides the ECU with engine temperature information. 4. Crankshaft position sensor: Detects the crankshaft and engine speed, providing the ECU with a reference signal for determining ignition timing and firing order. 5. Oxygen sensor: Detects the oxygen concentration in the exhaust and provides the ECU with a reference signal for maintaining the fuel/air ratio near the optimal (theoretical) value. 6. Knock sensor: Installed on the engine block to specifically detect engine knocking conditions, providing the ECU with a signal to adjust the ignition timing accordingly.
1
1
Share

Is Direct Injection Better or Multi-Point Injection Better?

Multi-point injection has obvious advantages over carburetor models, while direct injection is a new technology that outperforms electronic injection in all aspects except for higher production costs and more complex processes. Below is a detailed introduction to both: 1. Electronic Injection: The electronic injection system in car engines generally consists of three main components: the fuel injection circuit, sensor group, and electronic control unit. If the injector is installed in the original carburetor position, meaning there is only one fuel injection point for the entire engine, this is called single-point injection. If injectors are installed on the intake pipe of each cylinder, meaning fuel is injected into the cylinders from multiple locations (at least one injection point per cylinder), this is called multi-point injection. 2. Direct Injection: The injector is placed inside the cylinder, where fuel is atomized and sprayed into the cylinder under high pressure, mixing with air for ignition. This enables lean combustion within the cylinder, thereby improving engine efficiency. It also offers excellent fuel economy and lower exhaust emissions. Additionally, direct injection technology allows for higher compression ratios, significantly increasing power output in engines of the same displacement.
10
5
Share

Can Incorrect Wheel Alignment Cause Abnormal Noises?

Incorrect wheel alignment may cause some abnormal noises, but in most cases, it does not. All four wheels of a car have wheel alignment data, and the wheels are not perpendicular to the ground. The front wheels have parameters such as toe and camber, while the rear wheels also have camber. If the wheel alignment is incorrect, it can lead to uneven tire wear, which affects the tire's lifespan. Here are some relevant details about replacing new tires: 1. If the four new tires are replaced due to severe abnormal wear on the old tires, this can affect the wheel alignment data, so a wheel alignment is necessary. 2. The main parameters adjusted during wheel alignment include caster, kingpin inclination, camber, and toe. Adjusting caster mainly maintains straight-line stability and steering return; adjusting kingpin inclination also maintains stability and steering return; adjusting camber increases the tire's contact area to counteract adverse effects; adjusting toe compensates for the adverse effects caused by camber or toe-in.
10
0
Share

Which gear should an automatic transmission car use when going up and down long slopes?

The correct practice for an automatic transmission car going down a long slope is to shift from D gear to a low gear. Some automatic transmissions have an L gear, which stands for Low gear, designed for safety considerations. When descending a long slope, the L gear can utilize the engine's resistance to control the vehicle's speed, reducing the frequency of using the car's brakes and preventing the danger caused by brake fade due to frequent braking. Below are specific details about automatic transmission cars going downhill: 1. If encountering a short slope, you can simply stay in D gear and apply the brakes to pass. However, for long and steep slopes, keeping the automatic transmission in D gear and continuously applying the brakes can easily cause the brake discs to overheat, reducing braking performance and significantly diminishing the braking effect. Therefore, it's best to avoid this practice. 2. Nowadays, many models come with an M gear, which stands for Manual mode. By switching to manual mode and then shifting to 1st or 2nd gear, you can utilize the engine's low-gear braking effect, combined with intermittent braking, to control the vehicle's speed.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.