What is the minimum ground clearance of the Xingyue L?

1 Answers
GarrettRose
07/29/25 8:05pm
The minimum ground clearance of the Xingyue L is 168mm. The minimum ground clearance of the Xingyue L refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance of the Xingyue L improves its off-road capability, but if the ground clearance is too high, the stability at high speeds may decrease. The Xingyue L is a compact SUV under Geely Auto. The length, width, and height of the Xingyue L are 4770mm, 1895mm, and 1689mm respectively, with a wheelbase of 2845mm. Generally, the ground clearance of sedans ranges between 110mm and 150mm, while SUVs have a ground clearance between 200mm and 250mm. However, the ground clearance of the Xingyue L is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Xingyue L's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. If the vehicle will frequently travel to remote areas or regions with poor road conditions, a higher ground clearance may be preferred to avoid damage to the undercarriage.
Was this review help?
6
2
Share
More Forum Discussions

How to Exit Parallel Parking?

Exiting a parallel parking space can be challenging. Here are detailed steps: 1. Adjust the rear: Move your vehicle's rear as far back as possible within the parking space, but avoid contact with the car behind. 2. Turn steering wheel fully left: Slowly maneuver out. If the front car is properly parked, there should be no risk of scraping it. 3. Rock the car: If tightly sandwiched, gently alternate between forward and reverse movements while turning the wheel left and right. After several adjustments, turning the wheel fully left will eventually allow safe exit.
1
4
Share

What is the Difference Between Subcompact and Compact SUVs?

The differences between subcompact SUVs and compact SUVs are as follows: 1. Different body lengths: (1) The body length of a subcompact SUV generally ranges between 3850-4350mm. (2) The body length of a compact SUV generally ranges between 4200-4750mm. 2. Different practical uses: (1) Subcompact SUVs are suitable for young consumers as personal commuting vehicles. (2) Compact SUVs are more suitable for family use, offering larger interior space that can comfortably accommodate five family members. 3. Different pricing: (1) Most subcompact SUVs feature small-displacement engines with more economical pricing, which are key factors attracting consumers to purchase them. (2) Compact SUVs typically have larger engine displacements, with higher purchase prices, operating costs, and maintenance expenses.
4
1
Share

Has the Oushang Changxing Been Discontinued?

Oushang Changxing has not been discontinued yet. Here are the relevant details: 1. Oushang Changxing: The Oushang Changxing is a compact MPV under Changan Automobile. The mid-range Oushang Changxing is equipped with daytime running lights, enhancing safety during daytime driving. The vehicle uses large-sized 235/50r18 Continental tires, providing a smooth driving experience. 2. Configuration: The front design of the Oushang Changxing looks stylish and highly recognizable. Paired with exquisite headlights, it adds a certain level of sophistication. The Oushang Changxing is equipped with a manual transmission, delivering a maximum power of 79KW and a maximum torque of 145N.m, offering good performance in terms of power.
20
4
Share

How to resolve the P0700 fault code in a Buick?

Buick displaying the P0700 fault code indicates an issue with the transmission. It is recommended to promptly drive to a 4S shop for inspection and repair. Relevant information about Buick is as follows: 1. Buick is an automobile brand marketed by General Motors in the United States, Canada, and China. 2. The founder of Buick, David Buick, began developing gasoline engines before 1899 and completed the second car in 1900, but the Buick Motor Company was not officially established until 1904. 3. Buick holds a significant position in American automotive history, serving as a major pillar of General Motors, driving advancements in the automotive industry and becoming a model for other car companies to follow.
18
3
Share

What does original factory off-line mean?

Off-line parts refer to defective or substandard components among original factory auto parts, which have certain flaws and are priced significantly lower than genuine parts, making them a preferred choice for 4S shops. Here is an introduction to original parts: 1. Genuine parts: These are qualified components produced by authorized manufacturers. Although they are made by qualified manufacturers, they may not meet the specifications of original factory parts. 2. Pure dismantled parts: These are auto parts removed from original vehicles. Since it is unclear whether they were taken from new cars, used cars, or accident vehicles, the quality of these parts is often disputed. 3. Brand parts: These are auto parts produced by small workshops. However, if the parts involve driving safety, careful consideration is necessary. 4. Refurbished parts: Most of these are components removed from accident vehicles. As a result, they are often heavily damaged and have a high probability of malfunctioning.
8
1
Share

What is the fuel consumption of SAIC Maxus G50?

The fuel consumption of SAIC Maxus G50 is 6.9L-7.5L. Relevant information about fuel consumption is as follows: 1. Constant-speed fuel consumption: This refers to the fuel economy indicator when the car is driving at a constant speed on a good road surface. Since constant-speed driving is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted. 2. Road cycle fuel consumption: This is the fuel economy indicator measured when the car is driving in repeated cycles on the road according to specified speed and time norms, also known as multi-condition road cycle fuel consumption. In the speed and time norms, each cycle includes various driving conditions, and specifies the gear shifting times, braking and stopping times, as well as the values of driving speed, acceleration, and braking deceleration for each cycle.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.