What is the minimum ground clearance of the WEY VV6?

3 Answers
VanKira
07/29/25 5:42am
WEY VV6's minimum ground clearance is 170mm, which reflects the vehicle's ability to pass over obstacles or uneven ground without collision. Taking the 2021 WEY VV6 as an example, it belongs to the compact SUV category, with body dimensions of: length 4625mm, width 1860mm, height 1720mm, and a wheelbase of 2680mm. The luggage compartment volume is 512L. The 2021 WEY VV6 is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 227PS, maximum power of 167kW, and maximum torque of 387Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
8
3
Share
MicahDella
08/12/25 8:03pm
As an average driver, I find the ground clearance of the WEY VV6 SUV to be around 170 mm, which works great for city driving. From my experience driving it recently, I don’t have to worry about scraping the undercarriage when going over speed bumps or small potholes—it makes daily commuting much more convenient. If the ground clearance were too low, the car would be prone to bottoming out in rainy or snowy conditions, but the 170 mm height provides better stability, especially for an SUV of this size. The grip during turns is solid, and it doesn’t significantly impact fuel consumption. I’ve also driven other SUVs like the Toyota RAV4, which typically have ground clearances ranging from 165 mm to 180 mm. The WEY VV6’s clearance is above average, suitable for most people without being too high to affect parking. In short, when choosing a car, it’s best to consider real-world road conditions—170 mm is a practical balance for both safety and performance.
Was this review help?
19
4
Share
Expand All
OEvelyn
10/03/25 7:25am
I think the official ground clearance of the WEY VV6 is stated as 170mm, which is quite a crucial figure, especially for someone like me who loves delving into car details. The ride height directly impacts off-road capability—for instance, when driving through grass or muddy roads, 170mm is sufficient to handle most non-extreme terrains without worrying about scraping the undercarriage. Compared to other domestic SUVs like the Geely Boyue, which also has around 170mm, the WEY VV6's tuning is slightly softer. Additionally, a higher suspension design can better absorb vibrations, enhancing comfort. On the other hand, a lower center of gravity improves high-speed stability, but the 170mm strikes a balance for daily driving and occasional adventures. I recommend new owners check the manual to confirm this parameter, as it helps assess the vehicle's practical value. Overall, from a technical perspective, it’s reasonable and well-judged.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

What Causes a Sedan to Lack Power and Fail to Accelerate When Climbing a Slope?

The reasons why a sedan lacks power and fails to accelerate when climbing a slope are: 1. Excessive carbon buildup in the vehicle; 2. Poor fuel quality; 3. Blocked intake or exhaust system; 4. Worn-out spark plugs; 5. Cylinder misfire; 6. Insufficient tire pressure; 7. Insufficient engine power; 8. Problems with the combustion chamber, ignition system, or valves; 9. Dirty fuel filter, damaged fuel pump, or clogged catalytic converter. Solutions to address a sedan's lack of power and failure to accelerate when climbing a slope include: 1. Cleaning carbon deposits; 2. Using high-quality gasoline; 3. Replacing spark plugs; 4. Regularly checking tire pressure; 5. Periodically cleaning the fuel filter; 6. Inspecting the fuel pump.
6
2
Share

Will the Prado meet China VI emission standards?

The Prado will not meet China VI emission standards due to the total emission restrictions under China VI, which are not suitable for large-displacement SUVs. Taking the 2010 Prado as an example, its body dimensions are: length 4820mm, width 1885mm, height 1845mm, wheelbase 2790mm, minimum ground clearance 220mm, and fuel tank capacity 87L. The 2010 Prado is equipped with a 2.7L naturally aspirated engine, with a maximum horsepower of 163ps and a maximum power of 120kw, paired with a 5-speed manual transmission. It uses a double-wishbone independent front suspension and a four-link solid axle non-independent rear suspension.
2
5
Share

How to Properly Set Up a Dash Cam?

To correctly set up a dash cam: 1. Assemble the dash cam with its mounting bracket; 2. Use the suction cup on the bracket to attach it to the front windshield near the rearview mirror; 3. Connect one end of the power cable (USB port) to the dash cam and the other end to the cigarette lighter; 4. After installation, turn on the dash cam and set the parameters to Simplified Chinese; 5. Configure the time, video resolution, and audio recording. A dash cam is a device that records video and audio information during vehicle operation, capturing the entire driving process to provide evidence in case of traffic accidents.
19
4
Share

What are the reasons for the ABS warning light to come on?

ABS warning light comes on due to a fault in the anti-lock braking system. The possible reasons for the ABS warning light to come on include: 1. Faulty wheel speed sensor; 2. Faulty wheel speed sensor wiring. The methods to reset the ABS warning light are: 1. Visit a repair shop to have it cleared with a computer; 2. Locate the car battery, disconnect the negative terminal, and reconnect it after a few minutes. ABS stands for Anti-lock Braking System, and its functions are: 1. Automatically controlling the braking force during braking to effectively keep the wheels in a rotating state; 2. Improving the stability of the car during braking and the braking performance on poor road conditions.
9
1
Share

What is the function of the 'off' button in a car?

The 'off' button in a car refers to the switch that turns off the vehicle stability control system. The working principle of the vehicle stability control system is as follows: when the vehicle is making a quick turn, dodging, or avoiding a suddenly appearing car or animal, if the vehicle slides outward due to understeer or crosses the centerline of the road or even spins in place due to oversteer, the system uses a computer to control the engine output and apply brakes to any wheel, thereby eliminating understeer or oversteer and improving the dynamic stability of the vehicle. When the car is powered on, the vehicle stability system is enabled by default. Press and hold the 'off' button to turn off the vehicle stability system.
3
4
Share

How to Defog a Toyota Corolla?

Toyota Corolla's defogging steps are: 1. Turn on the car's air conditioning; 2. Adjust the air conditioning to the warm air setting; 3. Turn on the car's external circulation; 4. Press the front and rear defogging buttons, and use warm air to complete the defogging. Taking the Toyota Corolla 2021 model as an example, its body dimensions are: length 4635mm, width 1780mm, height 1455mm, with a wheelbase of 2700mm. The Toyota Corolla 2021 model is equipped with a 1.2T turbocharged engine, with a maximum horsepower of 116ps and a maximum power of 85kw, matched with a continuously variable transmission.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.