What is the minimum ground clearance of the Volkswagen CC Shooting Brake in millimeters?

1 Answers
Corinne
07/30/25 2:27am
The Volkswagen CC Shooting Brake is a sporty sedan under the FAW-Volkswagen brand, equipped with Volkswagen's TSI turbocharged direct-injection engine and VR series naturally aspirated engines. Generally, the higher the ground clearance of the Volkswagen CC Shooting Brake, the better its off-road capability. However, if the ground clearance is too high, the stability at high speeds may decrease. The Volkswagen CC Shooting Brake is a sporty sedan under the FAW-Volkswagen brand, a culmination of four years of dedicated research by Volkswagen's German design team. It retains an elegant silhouette while maintaining a mature, business-oriented texture. The dimensions of the Volkswagen CC Shooting Brake are 4869 mm in length, 1870 mm in width, and 1459 mm in height, with a wheelbase of 2841 mm. Typically, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the Volkswagen CC Shooting Brake is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the vehicle's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice depends on the vehicle's intended use and the road conditions. For urban driving on well-paved roads, a vehicle with lower ground clearance may enhance stability and comfort. For frequent travel to remote areas or driving on rough terrain, a vehicle with higher ground clearance is advisable to avoid scraping or damaging the undercarriage.
Was this review help?
7
4
Share
More Forum Discussions

How to Steer Through an S-Curve?

Here are the methods for steering through an S-curve: 1. Align the car body properly, aiming for the center of the S-curve entrance. When the center of the car's front touches the right roadside line, turn the steering wheel to the left. Adjust the steering wheel according to the speed, keeping the left front corner of the car along the line. Use the rearview mirror to make reasonable steering adjustments. 2. When the car reaches the junction of the S-curve, turn the steering wheel one full turn to the right. Adjust based on the rearview mirror to control the distance from the left and right roadside lines. 3. When the middle of the car's front touches the left roadside line, turn the steering wheel half a turn to the right. During the maneuver, try to keep the right front corner of the car along the roadside line. This helps avoid crossing the line and allows flexible adjustment of the distance on both sides.
11
3
Share

What Causes Difficulty Starting a Honda Accord in Cold Weather?

The reason for difficulty starting a Honda Accord in cold weather is excessive carbon buildup inside the engine. Taking the 2021 Honda Accord as an example, it belongs to the mid-size sedan category with the following dimensions: length 4893mm, width 1862mm, height 1449mm, wheelbase 2830mm, fuel tank capacity 48.5 liters, and curb weight 1619kg. The 2021 Honda Accord features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 2.0L naturally aspirated engine producing maximum power of 146PS (107kW) and maximum torque of 175Nm, paired with an electronic continuously variable transmission.
16
0
Share

What is the setting method for Odyssey's automatic door locking while driving?

Odyssey's automatic door locking while driving can be set by following these steps: 1. Put the gear in P position; 2. Turn the key to the ON position with all four doors closed; 3. Press and hold the lock button for 6 seconds; 4. The hazard warning lights on the instrument panel will flash twice; 5. The automatic locking function is now activated. Automatic door locking while driving, also known as speed-sensitive auto lock, is an electronic device that automatically presses the door lock button when the vehicle reaches a preset speed, preventing accidental opening of the door. The purpose of the automatic locking function is anti-theft, allowing the doors to lock quickly after starting to drive, which can prevent door-pulling robberies during traffic jams or at red lights, providing a certain level of security.
9
0
Share

What is the reset method for the collision cutoff in the 2016 Lavida?

The reset method for the collision cutoff in the 2016 Lavida is: Use a decoder to access the 44 Power Steering System Engine Control Module, enter the security access code 20103 or 10608, and after successful login, proceed to the basic settings, then select 'Reset All Matching Values' to complete the process. The 2016 Lavida is a compact car with the following dimensions: length 4613mm, width 1765mm, height 1460mm, and a wheelbase of 2610mm. It features a MacPherson strut front suspension and a torsion beam rear suspension. The car is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 112PS, a maximum power of 82kW, and a maximum torque of 145Nm, paired with a 5-speed manual transmission.
3
5
Share

How to Turn Off the Wrench Light on a Car?

The method to turn off the wrench light on a car is to perform vehicle maintenance. The benefits of maintenance include: 1. Ensuring the vehicle remains in optimal performance condition; 2. Improving vehicle efficiency and reducing wear on parts and tires; 3. Enhancing driving safety; 4. Preventing potential hazards caused by vehicle issues; 5. Reducing noise and environmental pollution; 6. Maintaining a clean vehicle appearance and preventing damage. Maintenance tasks include: 1. Replacing engine oil, oil filter, and cleaning the air filter, checking for damage to the generator belt and wiper blades; 2. Checking if tire pressure is normal and inspecting tires for uneven wear, bulges, or damage; 3. Inspecting the vehicle's chassis, including brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 4. Checking all vehicle switches and lights to ensure they are functioning properly.
12
1
Share

Can I not replace the driving license if it is full of stamps?

If the driving license is full of stamps, it cannot be left unreplaced. You need to bring the owner's ID card, the motor vehicle driving license, and the motor vehicle registration certificate to the local vehicle management office or public security traffic management department for replacement. The motor vehicle driving license is subject to annual or biennial review, and the review time is determined based on the type and age of the vehicle. The purpose is to better control the use of the driving license and to promptly determine whether the holder still meets the conditions for the driving license. The process for replacing an expired driving license: 1. The replacement must be done within three months (90 days) before expiration by participating in the motor vehicle inspection; 2. For vehicles not exempt from inspection, the owner needs to bring a power of attorney, the driving license, and the compulsory traffic insurance policy to the local motor vehicle inspection station for inspection; 3. It is no longer necessary to apply for an inspection qualification mark. After passing the inspection, the endorsement will be directly noted on the supplementary page of the driving license.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.