What is the minimum ground clearance of the Verano?

3 Answers
AlessandraMarie
07/28/25 10:39am
The minimum ground clearance of the Verano is 130mm. Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to characterize the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The Verano is a compact car under the Buick brand, with body dimensions of 4718mm in length, 1802mm in width, and 1466mm in height, and a wheelbase of 2700mm. In terms of power, the Verano offers two engine options: a 1.5L and a 1.5T, with maximum power outputs of 118 horsepower and 169 horsepower, respectively. The 1.5L engine is paired with either a 6-speed automatic transmission or a manual transmission, while the 1.5T engine is matched with a 7-speed DCG dual-clutch transmission.
Was this review help?
17
2
Share
StSawyer
08/11/25 4:10pm
As a Verano owner, my car's minimum ground clearance is approximately 150mm, as officially stated. Having driven it in the city for over half a year, this height proves quite practical—speed bumps and small potholes rarely cause scraping, and parking on curbs is effortless. Once on a rural road through a muddy section, the ample clearance allowed the car to pass steadily without issues. When carrying cargo, it's crucial to avoid overloading to prevent the body from sinking and reducing clearance. This dimension is very city-friendly; even higher water levels during rain don't risk flooding the chassis. I recommend measuring the lowest point of the chassis with a ruler when picking up a new car for peace of mind.
Was this review help?
3
5
Share
Expand All
VanCarson
09/28/25 4:53am
I usually enjoy studying car specifications. The minimum ground clearance of the Verano is approximately 150mm, specifically measured under unladen conditions. This height is designed to balance daily drivability and comfort, slightly higher than some compact models like the Corolla's 130mm. The measurement should be taken on level ground, from the lowest point beneath the front axle to the ground. Factors affecting it include suspension stiffness and tire size; switching to thicker tires may slightly increase the clearance. Compared to SUVs like the Tiguan's 190mm, it's lower but more suited for urban driving. It's advisable to regularly check tire pressure and the chassis to prevent rust from affecting clearance. If you want to increase clearance, you could modify the shock absorbers, but this isn't highly recommended as it may alter the factory balance.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

What is the remote start tutorial for the Land Rover Range Rover?

First, you need to download the official app and register. After passing the manufacturer's verification, you can follow the function keys on the app to perform a remote start. Aim the key at the vehicle and press the lock button on the key. Within 5 seconds, hold the remote start button on the key for at least 4 seconds, or until the vehicle's turn signals flash. The parking lights will illuminate, and the doors will lock. After entering the vehicle during a remote start session, press the brake pedal and turn the ignition switch to the on position to drive the vehicle.
9
5
Share

How to Adjust the Dome Light Not Turning On When Opening the Door in a Land Rover?

If the interior light of a Land Rover Range Rover does not turn on when opening the door, it means the door control function has been turned off. You need to press the door control switch of the interior light to activate it. Open the driver's side door of the Land Rover Range Rover and step on the brake pedal. Press the one-touch start button of the Land Rover Range Rover to start the engine. The dashboard will light up, indicating that the engine has been started. There is a contact switch on the door. Press the door control switch of the Land Rover Range Rover to activate the interior light door control mode.
3
2
Share

How to Maintain a Land Rover Evoque?

Press the one-touch start ignition, use the function keys on the right side of the steering wheel, which are the 4 directional keys and 1 OK key, to find the vehicle information option on the dashboard. Locate the "Recent Alerts" option and press "OK" to enter. Simultaneously hold down the "Down" button on the right side of the steering wheel and the "i" button at the end of the turn signal lever, maintaining this action for about 10 seconds to complete the reset. Finally, restart the vehicle and check if the reset was successful. If not, repeat the operation.
7
3
Share

How to Engage Reverse Gear in a Kia Manual Transmission?

Locate the R gear on the Kia gear shift lever, which is designated for reverse. Engaging this gear allows the vehicle to move backward. Press down on the brake pedal of the Kia K2, leaving the accelerator pedal untouched for now. Press the Kia K2's one-touch start button to illuminate the dashboard and start the vehicle. Shift the Kia K2's automatic gear lever to the R position to enter reverse mode. Apply the brakes if there are obstacles, and gently press the accelerator if you need to increase speed. Once reversing is complete, depress the clutch, disengage the reverse gear, and release the clutch.
19
5
Share

How to Solve the Problem of Scooter Motor Spinning Freely?

When pressing the electric start button of the scooter, you can only hear the motor spinning freely without starting the vehicle. This may be caused by damage to the motor reduction gear. First, remove the transmission side cover. Check the reduction gear and find that the scooter motor cannot reset, confirming that the motor spinning freely is due to damage to the motor reduction gear. It is found that the reduction gear sleeve is severely worn and may no longer be usable. It is necessary to find the sleeve, reduction gear, and pressure cover according to specifications. Replace the sleeve, reduction gear, and pressure cover, then reassemble the vehicle. This will effectively solve the problem of the scooter motor spinning freely.
6
0
Share

What to Use to Clean Tar on a Car?

If there is rust, remove the rust first. Direct polishing can remove the rust. Choose a good anti-rust and waterproof coating to repair the rusted holes. When performing anti-rust work, it is best to use the same type of paint to prevent different paints from reacting with each other. After repairing the rusted holes on the chassis, apply a plastic sealant to the bottom of the car to prevent rust. To maintain the chassis in winter, perform a thorough chassis cleaning and anti-rust treatment. First, clean the chassis thoroughly.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.