What is the minimum ground clearance of the Verano?

How to replace wiper blades? What to do if one wiper blade stops moving?

Steps to replace wiper blades: Lift the metal wiper arm away from the windshield and keep it stable in a position perpendicular to the windshield; Press the tab and remove the old wiper blade; Separate it from the metal arm, insert the new wiper blade, and gently rotate the new blade; Until the hook snaps into place to secure the wiper, then place the wiper back onto the windshield. Solutions if one wiper blade stops moving: 1. Promptly remove fine sand particles from the wiper blade rubber; 2. Replace the rubber strip of the wiper blade; 3. Adjust the angle of the wiper blade by adjusting the spring gap. Wiper blades are rubber products, and after prolonged exposure to sunlight or extended use, they may age or crack, losing their flexibility. Car owners need to regularly replace the rubber strips of the wiper blades.

7

0

Share

What are the effects of accidentally adding 92 ethanol gasoline?

The effects of accidentally adding 92 ethanol gasoline include: 1. Increased fuel consumption: Since the heat value of ethanol is about 33% lower than that of gasoline, the energy density of ethanol gasoline is reduced compared to pure gasoline of the same volume; 2. Decreased power performance: Due to the lower heat value of ethanol gasoline compared to pure gasoline, and the higher evaporation temperature of ethanol than gasoline, the slower vaporization speed during combustion affects the formation of the air-fuel mixture, ultimately leading to a decrease in power; 3. Difficulty in cold starts: Ethanol gasoline has a high latent heat of vaporization, absorbing more heat during vaporization, which reduces the working temperature inside the engine cylinder, making it difficult to start at low temperatures. Ethanol gasoline not only reduces vehicle emissions but also has excellent cleaning properties, effectively eliminating the deposition and coagulation of fuel impurities in the fuel tank and fuel system (especially gelling phenomena), providing good fuel system cleaning.

7

1

Share

What does the KDSS dynamic suspension system mean?

KDSS dynamic suspension system means: KDSS is the English abbreviation for Kinetic Dynamic Suspension System, which translates to "Dynamic Suspension System" in Chinese. This system combines two opposing performance characteristics: 1. During off-road driving, it allows the suspension to extend freely, ensuring sufficient wheel travel for tire ground contact, improving stability and off-road capability; 2. During highway driving, it suppresses suspension extension, with the stabilizer bar twisting to counteract steering tilt, enhancing handling and comfort. In normal mode, KDSS operates as follows: when the vehicle is in a turning state, the outer suspension of both front and rear wheels is compressed, while the inner suspension is extended. This causes the stabilizer bar to twist, resisting body roll, with no fluid flow between the two hydraulic pumps connected by two pipelines, functioning like a conventional suspension but effectively improving anti-roll capability.

11

2

Share

What to Do When All 12 Points on Your Driver's License Are Deducted?

When all 12 points on your driver's license are deducted, the traffic management department of the public security authority shall confiscate your motor vehicle driver's license. The motor vehicle driver must then re-participate in a seven-day study and examination on road traffic safety laws, regulations, and related knowledge. If you pass the subject one exam, the points will be cleared, and your motor vehicle driver's license will be returned. If you fail the subject one exam, you will need to continue studying and retaking the exam. A driver's license, also known as a "driving license," is a document issued by the government's transportation department to individuals who qualify to drive. To obtain a driver's license, you must meet the required age and pass the driving test. The driver's license specifies the types of motor vehicles the holder is permitted to drive, such as motorcycles, passenger cars, trucks, buses, etc.

13

3

Share

What does the fault code P0404 mean for Wuling/Baojun vehicles?

Wuling/Baojun P0404 fault code indicates no signal from the EGR valve. This error may cause a decrease in torque. When it appears, you can check the wiring harness of the EGR valve or whether the entire valve is burnt out. Below is the relevant content: Function of the EGR valve: The EGR valve is a mechatronic product installed on diesel engines to control the amount of exhaust gas recirculated back to the intake system. Its function is to regulate the amount of exhaust gas entering the intake manifold for recirculation. P0404 fault handling method: When the P0404 fault code appears, first follow the EGR monitoring screen to compare the indicated opening with the actual following value for errors. If it meets the standard (within 5%), it is a normal phenomenon, and the P0404 fault code indicates an abnormal condition. If it does not meet the standard, it indicates a problem with the EGR valve. At this point, you can inspect and repair or directly replace the entire EGR valve. After completing the above steps and confirming the fault is resolved, you can clear the P0404 fault code.

8

0

Share

Do all three wires of the voltage reducer need to be connected?

Not all three wires of the voltage reducer need to be connected. The three wires of the voltage reducer are: black (negative), red (positive), and yellow (constant power). It is not mandatory to connect all of them; you can also just connect the positive and negative wires. However, if only the positive and negative wires are connected, the parking monitoring function cannot be used. Alternatively, if the yellow and black wires are connected but the red wire is not, it may cause the dashcam to fail to automatically start recording when the vehicle is turned on. This is mainly because the dashcam is continuously powered through the yellow wire, but it only starts recording when the vehicle is turned on and the red ACC wire is powered. After the vehicle is turned off, the red ACC wire loses power, and the dashcam delays for a few minutes before stopping recording. If the red ACC wire is not connected, the dashcam will not receive the signal indicating that the vehicle is turned on and will automatically shut down after a few minutes, requiring manual activation of the recording.

17

5

Share

What is the minimum ground clearance of the Verano?

How to replace wiper blades? What to do if one wiper blade stops moving?

What are the effects of accidentally adding 92 ethanol gasoline?

What does the KDSS dynamic suspension system mean?

What to Do When All 12 Points on Your Driver's License Are Deducted?

What does the fault code P0404 mean for Wuling/Baojun vehicles?

Do all three wires of the voltage reducer need to be connected?

Is the Civic produced by Dongfeng Honda?

Under What Circumstances Is There No Liability When Reversing?

Is a fuel consumption of over 9 liters per 100 km fuel-efficient or not?

What kind of car is the Renegade?