···
Log in / Register

What is the minimum ground clearance of the Toyota IZOA?

4 Answers
LondonDella
07/29/25 8:57am
Toyota IZOA's minimum ground clearance is 145mm. Minimum ground clearance, also known as chassis height, refers to the shortest distance from the car's chassis to the ground when the vehicle is at maximum load capacity. Below is some relevant information about the Toyota IZOA: 1. The Toyota IZOA is a compact SUV with dimensions of 4455mm in length, 1845mm in width, and 1565mm in height, and a wheelbase of 2640mm. The front suspension of the Toyota IZOA uses a MacPherson strut independent suspension, while the rear suspension employs a multi-link independent suspension. The drivetrain configuration is front-engine, front-wheel drive. 2. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 126kW and a peak torque of 203Nm. The engine is paired with a DirectShift-CVT continuously variable transmission.
Was this review help?
5
5
Share
StAlina
08/12/25 7:43am
The Toyota IZOA has a minimum ground clearance of approximately 160mm, which is quite suitable for a city SUV. When I drive this car for my daily commute, the most noticeable feeling is how smoothly it handles speed bumps or rough roads—there’s no need to worry about scraping the undercarriage. It’s especially effortless when entering parking lots with steep slopes. The slightly higher ground clearance also helps when driving through waterlogged areas; even during heavy rain, there’s no concern about the engine getting submerged. However, if the clearance were too high, it would increase wind resistance and affect high-speed stability—the 160mm design strikes a smart balance. On occasional weekend trips to rural roads, it offers a good mix of handling and comfort, making it just right for daily commuting without worrying about being too high or too low.
Was this review help?
1
4
Share
Expand All
LeAlaina
10/06/25 2:48am
I really appreciate the 160mm minimum ground clearance of the Toyota IZOA, which provides excellent off-road capability. As an urban off-road enthusiast, I rarely experience chassis scraping when driving on rough dirt roads or gravel sections. I remember one time when I went for a picnic in the suburbs, the car handled uneven terrain smoothly, which was much more reassuring compared to low-clearance vehicles. This height is quite moderate—it doesn't feel too unstable at high speeds. However, if you frequently venture off-road, I'd recommend checking and reinforcing the underbody protection. Higher ground clearance offers significant advantages on complex terrain, but you'll need to regularly inspect and clean accumulated mud under the chassis to maintain vehicle hygiene.
Was this review help?
10
0
Share
Expand All
JosephineFitz
11/19/25 4:14am
The Toyota IZOA has a minimum ground clearance of approximately 160mm. I've driven it several times and had a great experience. This height helps protect the chassis when overcoming obstacles and reduces the risk of scraping. In urban driving, it handles speed bumps and small potholes with ease without compromising turning flexibility. You can check the exact figure in the manual, but the 160mm design enhances practicality, making it reliable enough for daily use.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

How to Repair a Leaking Car Radiator?

Check if the radiator cap is tightened; if not, tighten the car radiator cap. Inspect the radiator hoses for any damage. If found, temporarily wrap the cracked area tightly with tape and promptly visit a repair shop to replace the hose. Examine the radiator for any cracks. Use a method of pressurizing the radiator with air to observe where water seeps out under pressure, then proceed with repairs.
16
2
Share

How to Reset the Wrench Light on the Mazda3 Axela?

The method to reset the wrench light on the Mazda3 Axela is as follows: 1. First, press the one-touch start button of the Mazda3 Axela. 2. Then press the INFO button on the left side of the multifunction steering wheel, followed by the SET button on the right side of the steering wheel. 3. At this point, the central LCD screen will display the vehicle maintenance information. 4. Finally, press the OFF button at the lower right of the steering wheel, and the wrench light will be reset. This will clear the wrench indicator light. More details are as follows: 1. The wrench-shaped light is called the maintenance reminder light, alerting the owner that maintenance is due. The vehicle is preset to remind the owner to change the oil and perform maintenance after reaching a certain mileage. After changing the oil, the reminder needs to be reset. Typically, mechanics at service centers will assist in resetting it to prepare for the next maintenance count. If not reset, the mileage of your maintenance will not be recorded. 2. The first maintenance interval for the Mazda3 Axela is 5,000 kilometers, with the first service being free. The main maintenance items include oil change, oil filter replacement, and routine inspections. It is important to note that the first service requires bringing the vehicle's registration certificate or certificate of conformity, as well as the quality warranty manual.
4
2
Share

How to Install a Motorcycle License Plate?

License plates should be installed on the plate holder with the front side facing outward and the characters in the correct orientation. Reverse or upside-down installation is prohibited. After receiving the license plate, there will be two packages of professional mounting screws. Insert the screws into the holes by rotating them as you push them in. First, align the license plate by hand, ensuring equal spacing on both sides so that all four screw holes on the plate match the four holes on the bumper. Use a screwdriver to rotate and remove the screws if necessary. Tighten the screws with a screwdriver. Once tightened, gently press the anti-theft caps into place. Note that these caps are one-time use and cannot be removed once installed.
16
5
Share

How to Handle 24 Points Deducted from Driver's License?

The driver's license will be temporarily confiscated by the traffic police, and you must complete full-score education at the traffic management department that confiscated it within 15 days. If not completed, the license will be announced as suspended. You need to first attend a seven-day study on road traffic safety laws and regulations, followed by the subject one exam. Within 10 days after completing subject one, you must take the road driving skills test, which is the subject three exam. Only after all exams are completed and passed will the deducted points be cleared and the driver's license returned.
7
0
Share

How Many Kilometers Does a Tesla Need to Drive to Activate AP?

500 kilometers are required to activate. Tesla AP is the automatic assisted driving function of Tesla vehicles. Here is a detailed introduction about Tesla vehicles: Overview: Tesla vehicles generally refer to Tesla. Tesla is an American electric vehicle and energy company that manufactures and sells electric vehicles, solar panels, and energy storage equipment. Its headquarters is located in Palo Alto. Others: Tesla's first car product was the Roadster, released in 2008, a two-door sports car. The second car product was the Model S, released in 2012, a four-door all-electric luxury sports sedan. The third car product was the Model X, a luxury all-electric SUV.
11
4
Share

What Causes Uneven Wear on the Left Front Wheel?

Uneven wear on the left front wheel can be caused by issues with wheel alignment, tire ply rating, or tire pressure. Wheel Alignment Issues: After prolonged use of the vehicle, if the driver notices symptoms such as heavy steering, shaking, pulling to one side, misalignment, or failure of the steering wheel to return to center, as well as abnormal tire wear patterns like one-sided wear, scalloped wear, block wear, or uneven wear, or if the vehicle feels floaty, bumpy, or unstable while driving, it's advisable to check the wheel alignment values to see if they deviate significantly and perform repairs promptly. (Typically, a four-wheel alignment check includes four parameters for the front wheels: toe, camber, kingpin inclination, and caster.) Tire Ply Rating Issues: Check whether the purchased tires are of the same model. Tires of the same model may have different ply ratings, such as load-range tires available in 16-ply and 18-ply. If the ply ratings don't match, tires with higher ply ratings may experience accelerated wear. Tire Pressure Issues: This issue is more common with load-bearing tires. When tires are used side by side, if one tire is overinflated, it can lead to crown wear, characterized by higher tread patterns on both sides of the tire and accelerated wear in the middle of the tire crown. Second, insufficient tire pressure can cause the tire to form an arch shape, reducing contact with the ground and accelerating wear on the outer edges of the tire crown. Third, uneven tire pressure between left and right tires can cause the tire with lower pressure to wear more on one side.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.