What is the minimum ground clearance of the Skoda Octavia Combi?

1 Answers
VanPaislee
07/29/25 1:39pm
The minimum ground clearance of the Skoda Octavia is 120 millimeters. The minimum ground clearance of the Skoda Octavia refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. Generally, a higher ground clearance of the Skoda Octavia improves off-road capability, but if the ground clearance is too high, the stability at high speeds may decrease. The Skoda Octavia is a compact car under SAIC Volkswagen Skoda. The dimensions of the Skoda Octavia TSI280 version are 4753 mm in length, 1832 mm in width, and 1469 mm in height, with a wheelbase of 2730 mm. Other versions measure 4675 mm in length, 1814 mm in width, and 1460 mm in height, with a wheelbase of 2686 mm. Typically, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the Skoda Octavia is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Skoda Octavia's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice depends on the vehicle's purpose and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a vehicle with higher ground clearance may be preferable to avoid scraping or damaging the undercarriage.
Was this review help?
7
0
Share
More Forum Discussions

What Causes a Car to Stall at Idle Speed?

There are many reasons why a car may stall at idle speed, such as leaks in the intake system, low fuel pressure, clogged air filters, fuel injector atomization leaks, improper idle adjustment, faulty spark plugs, or malfunctioning air flow meters. Unstable idle speed leading to stalling is one of the more common issues in older cars, with symptoms including fluctuating RPMs and idle speed dropping low enough to cause stalling. The root of the problem can often be traced to aspects related to idle speed control. The car's idle speed is primarily controlled by a small throttle opening or a bypass air passage. When the engine is idling, the throttle is either fully closed or only slightly open. Under stable idle conditions, the engine's idle speed is managed through closed-loop control.
20
3
Share

What are the techniques for gear shifting in the Subject 3 driving test?

Subject 3 driving test gear shifting techniques are as follows: 1. Gear shifting: This is the substantive step in the entire gear shifting process. After the RPM synchronization, the two gears will smoothly engage, so this step will not produce any impact. 2. Press the clutch and release the accelerator: The reason for the imbalance is the incorrect sequence of pressing the clutch and releasing the accelerator. If you release the accelerator before pressing the clutch, since the engine stops supplying fuel while the clutch is not disengaged, a "reverse drag" or engine braking phenomenon may occur, which will produce a "jerk" impact feeling. 3. Release the clutch and press the accelerator: This is the stage most likely to produce impact, and the control of releasing the clutch is very critical.
5
0
Share

What Causes Engine Vibration When Turning on the Air Conditioning?

Reasons for engine vibration when turning on the air conditioning: 1. The air conditioning compressor malfunctions, causing excessive pressure during operation, which leads to vibration issues and subsequently affects the engine, causing resonance vibration. It is necessary to have it inspected and repaired at a repair shop or 4S store; 2. The throttle valve is clogged, affecting the engine's air intake function, leading to poor ventilation and abnormal engine vibration. The throttle valve needs to be inspected and cleaned; 3. Severe engine carbon buildup is the main cause of vibration. If carbon deposits are not effectively cleaned, they will affect normal fuel combustion, resulting in abnormal engine vibration. Timely cleaning of engine carbon deposits is required.
9
2
Share

What does parking system failure mean?

Parking system failure is caused by sensor issues that prevent the automatic braking function from being realized. The parking system refers to an automatic braking function. After activating this function, for example, when stopping at a red light, it is equivalent to not needing to pull the handbrake, which can simplify operations by avoiding the use of a handbrake or electronic handbrake. Automatic transmission models also do not need to frequently switch between D to N or D to P. The automatic parking system is a technical application that can achieve an automatic handbrake during vehicle operation. This technology allows drivers to avoid prolonged braking when the vehicle is stopped. With the automatic electronic parking brake activated, it can prevent unnecessary sliding of the vehicle. The realization of the automatic parking system function is not simply achieved by using an electronic handbrake.
18
0
Share

Is there a big difference between Audi 40 and 45?

Audi 40 and 45 are not much different. The differences between Audi 40 and 45 are as follows: Power: The maximum power of the 40 model is 140kw, with a maximum torque of 320 Nm, while the 45 engine has a maximum power of 185kw and a maximum torque of 370 Nm. This engine is also equipped with AVS technology and hybrid injection technology, and uses an aluminum alloy cylinder head. Engine: The 40 is a low-power version of the 2.0-liter turbocharged engine, while the 45 is a high-power version of the 2.0-liter turbocharged engine. Both engines are essentially 2.0-liter turbocharged engines, with the only differences being in maximum power and maximum torque.
8
3
Share

What is the actual fuel consumption of the Enclave?

The official average fuel consumption of the Enclave is 10.3L per 100km, while the actual fuel consumption is around 10.8L per 100km. The specific fuel consumption depends on factors such as the vehicle condition. Driving Habits: Driving habits refer to both driving behavior and vehicle maintenance habits. Proper driving habits can reduce fuel consumption during driving. However, without good maintenance habits, the engine is prone to carbon buildup, leading to increased fuel consumption. Road Conditions: Except for some models with engine start-stop systems, most vehicles have extremely high instantaneous fuel consumption when idling. Congested road conditions often involve frequent idling and starting, so avoiding congested routes is the most direct yet challenging way to save fuel.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.