What is the minimum ground clearance of the Passat?

What Needs to Be Replaced for a BMW at 20,000 Kilometers?

BMW at 20,000 kilometers requires the following replacements: 1. Engine oil and oil filter: BMW uses fully synthetic oil, which should be replaced every 10,000 kilometers on average. Therefore, at 20,000 kilometers, the engine oil and oil filter need to be replaced. 2. Air filter: The manufacturer requires replacing the air filter once every two oil changes, so at the 20,000-kilometer maintenance, the air filter needs to be replaced. 3. Cabin air filter: The manufacturer requires replacing the cabin air filter once every two oil changes, so at the 20,000-kilometer maintenance, the cabin air filter needs to be replaced. Of course, it can also be replaced in time according to the actual usage environment. 4. Fuel filter: The manufacturer requires replacing the fuel filter once every two oil changes, so at the 20,000-kilometer maintenance, the fuel filter needs to be replaced. 5. Spark plugs: For B-series and S-series engines, the manufacturer requires replacing the spark plugs every 20,000 kilometers. For M and N series, they should be replaced every 40,000 kilometers. 6. Brake fluid: After 20,000 kilometers, if the brake fluid has been in use for more than two years, it also needs to be replaced.

19

5

Share

Difference Between Car Radiator and Condenser?

The differences between a car condenser and radiator are as follows: 1. Different connecting pipes: The car condenser is connected with aluminum pipes, while the radiator is connected with rubber hoses. 2. Different attached devices: The car condenser is equipped with an aluminum cylindrical dryer nearby, whereas the radiator has a water temperature sensor underneath. 3. Different thickness: The car condenser is about 15mm thick, while the radiator is approximately 30mm thick.

1

2

Share

The Function of Turbine Oil System

The functions of the turbine oil system include lubrication and supply. The specific details are as follows: 1. Lubrication: It supplies oil to the bearings of the unit to lubricate and cool them. In the sliding bearings of the turbine, the turbine oil fills the gap between the journal and the bearing bush, forming a fluid lubrication film, thereby achieving lubrication. 2. Supply: It provides stable and sufficient pressure oil to the regulation system and protection devices, ensuring their normal operation. It also supplies lubricating oil to various transmission mechanisms. Based on the functions of the turbine oil system, the oil system is generally divided into two parts: the lubricating oil system and the regulating (protection) oil system.

8

1

Share

What are the consequences of not wearing a seat belt?

The following are the consequences of not wearing a seat belt: 1. Consequences for pregnant women and passengers holding infants: For pregnant women or passengers holding infants who genuinely cannot wear seat belts, traffic police will enforce the law humanely during roadside checks, issuing warnings before letting them pass. 2. Consequences for rear-seat passengers not wearing seat belts: Drivers will also be penalized if rear-seat passengers do not wear seat belts, which many drivers find unfair. 3. Inability to protect passengers in the event of a traffic accident: If seat belts are properly fastened during a traffic accident, the injuries sustained by vehicle occupants will be significantly less severe compared to not wearing seat belts.

13

1

Share

Can You Not Remove the Carpet When a Car Gets Flooded?

You need to remove the carpet when a car gets flooded. After flooding, the car carpet absorbs a large amount of water. If not removed promptly, the accumulated water will cause a foul odor that lingers and fails to evaporate, significantly impacting the driving and riding experience. The interior and carpets of a flooded vehicle absorb substantial moisture—squeezing the inner sponge will release a lot of water. Since the interior is mostly made of fabric or leather, prolonged soaking in water leads to mold growth and unpleasant odors. Hence, the distinct smell of a flooded car is easily recognizable. Therefore, it's essential to remove these soaked carpets as soon as possible, clean them thoroughly, and dry them under direct sunlight to eliminate moisture.

12

0

Share

What Causes Audi Parking Brake Malfunction?

Audi parking brake malfunction is most commonly caused by the handbrake lever not being fully released. Below are the relevant details: 1. Introduction: The parking brake, usually referring to the manually operated brake installed in motor vehicles, commonly known as the handbrake, is used to stabilize the vehicle after it has come to a stop, preventing accidents caused by rolling on inclined surfaces. The typical handbrake is positioned within easy reach of the driver's right hand for convenient operation. 2. Common Issues: For Audi parking brake malfunctions, first check if the handbrake lever is fully released. If not, the handbrake switch underneath may remain engaged, or the handbrake might not have been pressed to the switch position. Next, check if there is a shortage of brake fluid, and if so, replenish it promptly. Finally, it may be necessary to visit a 4S dealership for a diagnostic scan with a computer tester. After repairing according to the fault code, reset the malfunction indicator light.

14

3

Share

What is the minimum ground clearance of the Passat?

What Needs to Be Replaced for a BMW at 20,000 Kilometers?

Difference Between Car Radiator and Condenser?

The Function of Turbine Oil System

What are the consequences of not wearing a seat belt?

Can You Not Remove the Carpet When a Car Gets Flooded?

What Causes Audi Parking Brake Malfunction?

What is the Elegant Name for a Car?

What are the differences between the BMW 3 Series before and after the facelift?

Where is the air conditioning relay located in an Audi A6?

Why do cars have front disc and rear drum brakes?